What Causes the Rear Glass Rattle in Haval H6?

2 Answers
ORylee
07/29/25 3:45am
If the window glass of Haval H6 produces abnormal noises, it may be due to dust entering the sealing rubber. It is recommended that the owner clean the sealing rubber. If the issue persists after cleaning, check whether the flocking strip around the window has aged, leading to poor sealing. If this is the cause, replacing it can resolve the problem. Motor Issues: If the electric window motor is malfunctioning, it is advisable for the owner to visit a 4S shop for inspection and repair. For aging window sealing strips, owners can opt to purchase sealing strip repair oil or wax. These products do not chemically react with the rubber strips but instead lubricate them, making them soft and elastic, thereby solving the noise issue. Maintaining the sealing strips of a new car is particularly important to prevent aging, reduce damage, and extend their lifespan. Cards Slipping into Window Gaps: When the car is parked outside, promotional cards are often inserted into the windows by advertisers. If the owner inadvertently rolls down the window, these cards can slip into the window gap. Drivers should be cautious when driving. If cards are found inserted into the windows, they must be removed promptly to prevent them from falling inside when the window is rolled down.
Was this review help?
8
1
Share
JosephineMarie
08/12/25 7:32am
As an owner who has driven a Haval H6 for five years, I've encountered this issue too. The most likely cause is aging and deformation of the rear window sealing strip, especially for cars frequently parked outdoors under direct sunlight. When the rubber hardens, it makes squeaking noises during window operation. Another often overlooked point is loose fasteners on the trunk partition - the plastic parts knocking against the glass create clunking sounds when driving over bumps. Once I found my car jack wasn't secured properly and kept rolling around in the trunk over speed bumps. To confirm, have someone drive while you sit in the back seat and hold the partition to listen. If you still can't locate the source, try spraying some silicone lubricant in the window channels - a ten-dollar solution that often works.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

How to Check the Working Condition of a Used Car Engine?

To inspect the working condition of a used car engine, first start the engine and carefully listen for any noises or irregularities. Then, take the car for a drive to feel whether the engine's power output is smooth and if the power response is quick. Finally, if possible, read the engine's fault codes to check for any issues. More details are as follows: 1. The definition of engine working condition refers to the operating state of the equipment under conditions directly related to its operation. The engine's operating state with the lowest fuel consumption rate is called the economic condition; the operating state when the load exceeds the rated value is called the overload condition. 2. Engine working condition, or the engine's operating state, is mainly characterized by the engine's output power and torque at different speeds. The engine can be divided into eight basic working conditions: starting, post-start, warm-up, idle, partial load, full load, transition, and dragging.
17
2
Share

What are the reasons for the car's throttle being fully pressed but the RPM not increasing?

The reasons for the car's throttle being fully pressed but the RPM not increasing are: 1. Damaged spark plugs: The spark plugs are damaged, and the wear of the spark plug electrode gap leads to insufficient spark plug ignition, resulting in incomplete combustion of the air-fuel mixture; 2. Poor fuel quality: The poor quality of gasoline causes poor atomization of the fuel injector, leading to incomplete combustion of the air-fuel mixture in the cylinder. It is recommended to use higher-grade gasoline and perform a fuel system cleaning; 3. Unstable fuel pressure: If the engine carbon deposits have been cleaned, the engine oil has been changed, and the spark plugs have been replaced, but the problem persists, it is necessary to go to a repair shop to check whether the fuel supply pressure and the intake pressure sensor are normal. If the fuel pump supply pressure is abnormal or the intake pressure sensor value is incorrect and not working properly, the fuel pressure should be checked, and parts should be replaced if necessary.
16
0
Share

How many kilometers does the Magotan spark plug need to be replaced?

Magotan spark plugs should be replaced every 30,000 kilometers. Methods to determine if a spark plug is damaged: Remove the spark plug and observe its condition based on the following appearance colors. A normal spark plug will have an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug will have a reddish-brown insulator skirt, an electrode gap between 0.8-0.9mm, and no signs of electrode burning. If the spark plug is covered in oil or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, with signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates that the wrong heat range was selected for the spark plug or that the air-fuel mixture is too rich, with oil seeping up.
15
0
Share

What is the difference between imported BMW and Brilliance BMW?

Brilliance BMW and imported BMW differ in the automotive quality standards of the countries where they are sold, resulting in some variations in the vehicles. Below is additional information: 1. Brilliance BMW: Brilliance BMW Automotive Co., Ltd. is a joint venture established by BMW Group and Brilliance China Automotive Holdings Limited, engaged in the manufacturing, sales, and after-sales service of BMW brand vehicles. In May 2003, Brilliance BMW Automotive Co., Ltd. was officially registered, with its headquarters and production plant located in Shenyang, the capital of Liaoning Province. 2. BMW Cars: BMW cars refer to vehicles produced by Bayerische Motoren Werke AG (abbreviated as BMW). The main series include the 1, 2, 3, 4, 5, 6, 7, and 8 series. BMW is renowned worldwide for producing luxury cars, motorcycles, and high-performance engines.
9
4
Share

What are the letter codes for license plates in Henan?

The letter codes for license plates in Henan are as follows: 1. Yu A Zhengzhou, Yu B Kaifeng, Yu C Luoyang, Yu D Pingdingshan, Yu E Anyang, Yu F Hebi. 2. Yu G Xinxiang, Yu H Jiaozuo, Yu J Puyang, Yu K Xuchang, Yu L Luohe, Yu M Sanmenxia. 3. Yu N Shangqiu, Yu P Zhoukou, Yu Q Zhumadian, Yu R Nanyang, Yu S Xinyang, Yu U Jiyuan (directly administered by the province). Below is some related information about license plate colors: License plate colors include white, blue, yellow, and black. White represents military and police plates, such as GK12001, which stands for Guangzhou Military District. Zhe A1063 Police represents a vehicle from the Hangzhou Public Security Bureau. Blue represents ordinary small vehicles. Yellow represents ordinary large vehicles. Black represents vehicles used by foreign investors in China or important figures.
1
2
Share

What Causes Cylinder Scoring?

Cylinder scoring can be attributed to the following reasons: 1. Poor cylinder lubrication. Insufficient or interrupted supply of cylinder lubricating oil leads to direct metal-to-metal contact, resulting in cylinder scoring. 2. Inadequate running-in. To achieve effective running-in within the shortest possible time, both the duration and load distribution must be carefully considered. Prolonged running-in under excessively low loads may still fail to complete the process, while rushing into high-load operation can cause cylinder scoring. 3. Insufficient cooling. Poor cooling leads to excessive temperatures in the cylinder and piston, causing lubrication issues. It also causes the piston and cylinder liner to overheat, expand excessively, and deform, losing their normal clearance and resulting in cylinder scoring. 4. Abnormal piston ring operation. Gas leakage damages the lubricating oil film, raising surface temperatures. Broken piston ring fragments can easily fall between the piston and cylinder, leading to cylinder scoring or seizure.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.