···
Log in / Register

What Causes the Rattling Noise When an Eighth-Generation Accord Drives on Bumpy Roads?

4 Answers
VanMatteo
08/30/25 5:21am

There are several reasons why an eighth-generation Accord may produce a rattling noise when driving on bumpy roads: 1. Body noise: This is usually caused by insufficient body rigidity, leading to deformation during driving, resulting in friction or shaking between doors and door frames, or friction between steel plates due to welding failures in certain areas. Applying adhesive strips on doors and windows or placing rubber pads at friction points may help reduce or eliminate the noise. 2. Engine compartment noise: There are various possibilities for noise originating here. A high-pitched belt squeal is typically caused by belt slippage. If there is a sound of metal parts rubbing against each other while the engine is running, it usually indicates damage to the bearings of the generator, water pump, or power steering pump.

Was this review help?
15
0
Share
VanEmerson
09/12/25 2:30am

I've been driving an eighth-generation Accord for many years, and the car does make a clunking sound when going over bumpy roads, which is usually not a minor issue. The sound comes from the aging suspension system, such as worn or loose shock absorber top mounts, which vibrate and make noise when hitting potholes. It could also be due to loose stabilizer bar links or cracked control arm bushings, causing parts to collide. I recommend getting it checked as soon as possible because ignoring it can accelerate damage to other components, such as wheel bearings, ultimately increasing repair costs. Regularly performing a simple check of the chassis before driving to look for obvious looseness can help identify problems early.

Was this review help?
7
0
Share
Expand All
StAiden
10/26/25 3:20am

A clunking noise is quite common when driving on bumpy roads. I think the issue with the eighth-generation Accord might be related to its suspension system. For example, if the shock absorber mounting seat is damaged, components can collide and make noise when driving on rough roads. Additionally, loose brake caliper brackets can also cause similar abnormal sounds, so it's important to check them. If left unrepaired, this could affect steering stability over time and pose a safety hazard. It's best to have a professional inspect it to avoid causing further damage by attempting DIY repairs. Regular suspension maintenance can reduce such issues and extend the vehicle's lifespan.

Was this review help?
11
3
Share
Expand All
RobertDella
12/09/25 3:38am

A rattling noise on bumpy roads is mostly caused by loose chassis components, such as aging suspension bushings or loose shock absorber brackets. I've noticed this issue frequently occurs in eighth-generation Accords after prolonged use. Delaying repairs can accelerate wear. Well-maintained cars have fewer abnormal noises, so don't wait until major problems arise. Quick fix: Check mounting bolts and bushings, and replace them if necessary.

Was this review help?
6
5
Share
Expand All
More Forum Discussions

What car is the Ford airbag?

Ford vehicles have the word AIRBAG on the steering wheel, which is not a brand logo but an indicator for the airbag. All cars equipped with airbags have this marking. Below is relevant information about car airbags: 1. Use in conjunction with seat belts: In the event of a crash, if seat belts are not worn, the protective effect of the airbag will be significantly reduced. Using airbags alone can reduce the fatality rate by about 18%, using seat belts alone can reduce it by about 42%, and when airbags are used together with seat belts, the fatality rate can be reduced by about 47%. 2. Do not place items on the airbag: The force of an airbag deploying is very strong. If items are placed on it, the ejected objects can cause secondary injuries, so avoid placing any items in front of or near the airbag.
19
3
Share

What Causes White Foam in the Radiator?

Specific reasons are as follows: 1. Damaged Cylinder Head Gasket: The water pipe and oil passage are connected, causing the coolant and engine oil to mix on the engine block. The coolant, now contaminated with oil, changes color. Under the pressure of the cylinder, it enters the water passage, resulting in white foam during the coolant circulation. Large amounts of thick foam in the coolant may also be caused by this issue. 2. Air Bubbles During Startup: Air bubbles appearing during startup may be due to air trapped in the coolant. As the coolant circulates, the air is expelled, which is a normal phenomenon. 3. After Air is Expelled: Check the coolant level. If it is below the "min" mark, add coolant to bring it within the normal range. When adding coolant, wait for the engine to cool down to avoid the risk of coolant spraying out.
4
5
Share

What could be the reason for the Ford Escort's driver-side window glass not being able to move up or down?

Ford Escort's driver-side window glass not being able to move up or down may be due to foreign objects causing jamming inside the window or a malfunction in the window regulator. Below is relevant information about automotive window regulators: 1. Classification: The window regulator is the mechanism for raising and lowering car door glass, mainly divided into two categories: electric window regulators and manual window regulators. Nowadays, many car door windows generally use push-button electric operation, employing electric window regulators. 2. Electric Window Regulator: Electric window regulators for cars mostly consist of a motor, reducer, guide rope, guide plate, glass mounting bracket, etc. The master switch, controlled by the driver, manages the opening and closing of all door windows, while individual switches on each door handle allow separate control of each window's operation, making it very convenient to use.
8
2
Share

What Happens If a Vehicle Fails the Automatic Exhaust Emission Test on the Road?

Failing the automatic exhaust emission test on the road may indicate poor atomization of the fuel injector. Below are some details about failing the automatic exhaust emission test on the road: 1. Cylinder wear: This condition involves excessive carbon deposits and tar buildup, as well as failure of the three-way catalytic converter and oxygen sensor. Check the air filter, spark plugs, intake air temperature sensor, and intake manifold pressure sensor. Add dual-core friction-reducing repair agents and high-efficiency cleaners. If these measures are ineffective, use a three-way catalytic converter cleaner to clean the catalytic converter. Possible causes include insufficient oxygen supply in the intake system, cylinder wear, and carbon deposits inside the cylinder. 2. Solution: The three-way catalytic converter and front oxygen sensor may be affected. Incomplete combustion of the engine's air-fuel mixture can lead to significant carbon deposits. Therefore, cleaning the three-way catalytic converter and oxygen sensor can resolve many issues related to failed exhaust emission tests. If the fuel quality is poor, sulfur, lead, or phosphorus in the fuel can cause poisoning of the three-way catalytic converter, leading to its failure.
5
2
Share

How long after a traffic violation can it go unprocessed before incurring late fees?

If a traffic violation remains unprocessed for 15 days, late fees will be incurred. Below are the specific details: 1. Violation Processing: If a violation is left unprocessed and two additional violations occur without being addressed, the traffic police department has the authority to detain the driver's license and the vehicle until all violations are resolved. Failing to process violations on time can affect services related to the driver's license and vehicle registration, and the vehicle will not pass its annual inspection. It is recommended that vehicle owners regularly check for any violation records on the traffic management department's online platform and address them promptly if found. 2. Traffic Regulations: If the traffic management department of the public security authority imposes penalties such as temporary suspension or revocation of a driver's license for a non-local driver, the driver's license must be transferred to the issuing authority's traffic management department within 15 days from the date the penalty decision is made.
13
2
Share

How to Operate the Tape Window Lowering Method?

Prepare a large roll of transparent tape and stick it from top to bottom on the driver's side window, leaving about 15cm at the bottom end of the tape unattached to the glass. Apply six or seven strips evenly. Gather the unattached ends of all the tape strips together and pull them downward in the direction the window lowers. With the tape's assistance, the car window will slowly descend, allowing you to retrieve the keys inside the car. More related information is as follows: 1. Opening the window is not reliable: With the upgrade of modern car anti-theft systems, if tape could easily pull down the window, it would embolden theft gangs. It's difficult to pull down car glass with tape, and there's a risk of leaving adhesive residue from the tape on the glass. Ordinary transparent tape uses common organic solvents, which can turn yellow in a short time, leaving marks on the window and affecting its appearance. 2. The tape window lowering method is also not applicable: Given the current construction of car windows and the basic principles of window lift mechanisms, forcibly pulling out laminated car glass could potentially break the motor's steel wire or even damage the door frame.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.