What Causes the Rattling Noise in the GAC Trumpchi Front Passenger Storage Compartment?

1 Answers
EverlyFitz
07/29/25 9:11pm
There are many reasons for the rattling noise in the GAC Trumpchi front passenger storage compartment. The details are as follows: Loose Chassis: The rattling noise may originate from loose or deformed chassis components. Loose Screws: The noise could be caused by improperly tightened screws during installation, replacement, or routine maintenance due to human error. Other factors include component interference, incorrect positioning, or reverse installation, all resulting from negligence or carelessness. This situation is quite dangerous. Noise from Safety Components: The rattling may come from critical safety components, such as the braking system. For example, worn-out brake pads or direct friction with the disc at their limit can produce such noises.
Was this review help?
1
0
Share
More Forum Discussions

How to Remove Permanent Marker from a Car?

Spray alcohol on the marked area using a spray bottle, then repeatedly wipe it with chamois leather. It will quickly clean the marks without damaging the car paint. A mixture of soap, a small amount of ammonia, and turpentine can remove many stains from smooth surfaces.
3
4
Share

How to Deal with a Clogged Fuel Tank Vent Hole

Take out the car key and press the unlock button. Press the fuel tank cap release button from the driver's seat, or simply press the fuel tank cap directly with your hand. Hold the button on the small black cover and twist it counterclockwise to remove the small black cover. Then, remove the screws securing the fuel tank cap and the motor. Use a flat-head screwdriver to pry open the edge of the fuel tank cap, starting with a small gap. Then, hold the fuel tank cap with your hand and pull it outward. After removing the fuel tank cap, you will see a drainage pipe. Use a thin wire to clear out the dust inside.
17
2
Share

How to siphon fuel from a tank with a filter screen?

Disconnect the fuel line from the fuel rail in the front engine compartment, attach a transition adapter to connect a tube, then locate the fuel pump relay in the power distribution center and short-circuit it to siphon out the fuel. If you are not familiar with the process, it is best to visit a 4S dealership and have professional maintenance personnel perform the fuel siphoning. Since gasoline is highly volatile, safety precautions must be strictly observed.
12
0
Share

How to Lower a Hydraulic Jack?

Connect the provided wrench and socket to the rear of the jack, then rotate it directly to lower the jack's height. When operating the jack, avoid applying excessive force, as this may cause the piston to suddenly drop, leading to potential accidents and safety hazards.
8
5
Share

How to Adjust Excessive Fuel Injector Return Flow?

It may be caused by a damaged filter screen, allowing fuel containing impurities to enter the fuel pump and injector, resulting in poor fuel atomization and difficulty starting. Clean the fuel system pipelines, replace the fuel filter, repair or replace the fuel injector (test and adjust the injection pressure), and then try starting again.
16
1
Share

What to Do When a Hydraulic Jack Doesn't Lift?

The occurrence of leakage is mostly due to the oxidation of the sealing ring. Replacing it with a new one can solve the problem. Another reason could be improper placement of the jack during use. The jack must be positioned correctly before starting to lift the car.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.