What Causes the Rattling Noise in Tesla on Bumpy Roads?

2 Answers
LorenzoAnn
07/29/25 11:59pm
Tesla rattling noise on bumpy roads can be attributed to the following reasons: 1. Gaps Between Components: There may be gaps, misalignments, or shifts between leather, plastic, and wiring components, especially after prolonged exposure to sunlight. This can easily cause the car to produce rattling noises when driving on bumpy roads due to loose parts being squeezed. Generally, identifying the source of the noise and using materials like paper towels or rubber as spacers to block the gaps can help. 2. Collision Between the Car Audio Amplifier and Vehicle Components: This issue can usually be resolved by tightening the screws to secure the amplifier, CD player, and other components in place. 3. Collision Between the Sunroof Glass and Sunroof Frame: Prolonged exposure to sunlight can cause the sunroof rubber seal to soften, deform, and then harden, leading to gaps or misalignment. Additionally, if the sunroof sliding rails have not been maintained or lubricated for a long time, rattling noises are more likely to occur while driving.
Was this review help?
6
5
Share
McElijah
08/16/25 3:42am
I've been repairing Tesla vehicles for a while now, and bump-related noises are quite common. Usually, it's an issue with the suspension system, such as loose shock absorbers or aging and worn-out linkages, which produce metal friction sounds when vibrating. Tesla cars are lightweight, making their suspension more susceptible to impact; another possibility is that interior components aren't securely fixed, causing the trunk lid or seat brackets to creak over bumps. During inspection, first test drive to pinpoint the noise source—front noises often relate to chassis suspension, while rear noises may involve the trunk mechanism. If tires have uneven wear or wheel rims are deformed, they can also generate noise. It's advisable not to disassemble parts randomly; instead, visit a professional shop promptly to diagnose whether the suspension is deformed. Replacing a small part can often solve the issue, but delaying repairs increases the risk of suspension failure. Regular checks on dust boots and shock absorber fluid can prevent problems before they occur.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

How to Use Rearview Mirrors to Determine if the Car is Aligned Properly?

Car rearview mirrors are located on the left and right sides of the front of the car, as well as inside the front of the vehicle. You can use the rearview mirrors to determine if the car is aligned properly by following these 3 methods: 1. At a red light: When the car comes to a complete stop at a red light, observe the left rearview mirror to see if the car body is parallel to the road dividing line (yellow or white line). If they are parallel, the car is aligned properly; 2. Parking by the roadside: After the car is parked, observe the rearview mirror closest to the roadside to see if the car body is parallel to the curb. If they are parallel, the car is aligned properly; 3. Enclosed garage: After parking the car in an enclosed garage, which usually has limited space with walls on both sides, check if the extension lines on both sides form equal angles with the horizontal line of the garage door. If the angles are the same, the car is aligned properly.
10
5
Share

What to Do If the Edge of the Tire Is Slightly Scratched Off?

If the tread is slightly scratched off and not very deep, it can continue to be used normally. However, if the steel wire is exposed, it needs to be repaired or replaced with a new tire. Below is relevant information about tires: 1. Wear: Tires have wear indicators. There are triangle marks on the side of the tire. When the wear reaches the point indicated by the triangle mark, it is recommended to replace the tire. There are also raised marks inside the tire's drainage grooves. When the wear reaches the level of these raised marks on the tire surface, the tire should be replaced. Simple punctures can be repaired without needing replacement. Bulges must be replaced. 2. Aging: Rubber oxidizes in the air, and oxidized rubber hardens, reducing grip. Therefore, even if a set of tires is left unused, its lifespan will decrease. It is not recommended to use tires for more than 5 years from the production date. The production date is marked on the side of the tire.
14
3
Share

What does the fit designation h7r6 represent?

h7/r6 is an interference fit. In the mechanical industry, any fit marked with H7/r6 refers to a fit under the condition of the same nominal size, and H7/r6 is always an interference fit. Definition of transition fit: Transition fit refers to a fit that may result in either interference or clearance. Therefore, regardless of the actual dimensions, as long as the h7/r6 fit is selected, whether the tolerance zones overlap or not, it is considered a transition fit. Relevant regulations: When the hole is taken as the reference, H7 is the reference hole with a tolerance grade of 7, and h6 is the shaft with a clearance fit of grade 6 accuracy. When the shaft is taken as the reference, h6 is the reference shaft with a tolerance grade of 6, and H7 is the hole with a clearance fit of grade 7 accuracy.
15
5
Share

What car does the triangle with an S icon represent?

The triangle with an S is the logo of Citroën DS. Citroën DS is a top-tier luxury design brand in the French automotive industry. The full French name of DS is Déesse, which means 'goddess' in French. In 2012, the DS brand officially entered the Chinese market with its products as a new-generation luxury automotive brand under the PSA Peugeot Citroën Group. Below is an introduction to Citroën DS: 1. Engine: The car is primarily equipped with a 1.6T turbocharged engine, available in two tuning versions with maximum power outputs of 160 horsepower and 200 horsepower respectively; 2. Exterior: The design resembles that of a concept car, featuring a stylish and eye-catching appearance; 3. Interior: Sporty and fashionable, with a rational layout, rich and practical configurations, and a strong sense of technology; 4. Space: Equipped with 8-way electric adjustment for the front seats and multiple functions.
19
5
Share

How many points will be deducted for reversing on the ramp?

Reversing on a highway ramp will result in a 12-point deduction. Reversing on a highway ramp not only endangers your own life but also the lives of others. Relevant regulations: A highway ramp is the road on the right side of a highway exit or entrance, meaning it is part of the highway. According to relevant regulations, U-turns, reversing, and parking are not allowed on highways, so you cannot make a U-turn, reverse, or park on a highway ramp. What to do if you mistakenly enter a ramp: If you mistakenly enter a ramp because you didn’t see the warning signs, you should continue driving to the exit and then replan your route. Do not reverse or drive in the opposite direction. Ensure traffic safety by immediately pulling over to the emergency lane, turning on the hazard lights, and moving to a safe area outside the guardrail. Then, place a warning triangle 100 meters in front of the vehicle and contact the traffic police. Cooperate fully with the police when they arrive at the scene.
17
0
Share

Will Car Windshield Washer Fluid Freeze in Winter and What Are Its Functions?

Whether car windshield washer fluid freezes in winter depends on two scenarios: 1. Antifreeze washer fluid will not freeze. Antifreeze washer fluid ensures it remains unfrozen even when the external temperature drops below -20°C. It is an all-weather windshield cleaning solution containing antifreeze and cleaning components, capable of preventing freezing in winter and directly dissolving frost. 2. Ordinary washer fluid may freeze in winter. Windshield washer fluid primarily serves the following three functions: (1) Cleaning performance: Windshield cleaner is formulated with various surfactants and additives. Surfactants typically have wetting, penetrating, and solubilizing properties, thereby achieving cleaning and stain removal effects. (2) Antifreeze performance: The presence of alcohol and ethylene glycol significantly lowers the freezing point of the liquid, providing antifreeze protection and quickly dissolving frost. (3) Anti-fog performance: A single-molecule protective layer forms on the glass surface. This protective film prevents the formation of fog droplets, ensuring the windshield remains clear and transparent with unobstructed visibility.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.