What causes the Q5 sunroof to make noise?

2 Answers
DiJoy
07/24/25 9:36am
Q5 sunroof noise causes: 1. Insufficient lubrication of the car sunroof sliding rails, it is recommended to apply lubricating oil to increase lubrication; 2. Dust accumulation in the sunroof track, clean the debris and dust in the track; 3. Loose screws of the car sunroof, just tighten the screws. Precautions for using the sunroof: 1. Before opening the sunroof, check if there are any obstacles on the roof that may hinder the sliding of the sunroof; 2. Try not to use the sunroof on bumpy roads to avoid damage to the sunroof and sliding rail components caused by vibration; 3. It is strictly forbidden to open the sunroof on rainy days or when cleaning the vehicle to prevent rain or water droplets from causing the rubber seals and metal parts of the sunroof to age and rust easily. The body dimensions of the Q5 are 4629mm in length, 1898mm in width, and 1655mm in height, with a wheelbase of 2807mm.
Was this review help?
13
3
Share
VanKiara
08/11/25 4:54am
I've been driving an Audi Q5 for several years, and the sunroof occasionally makes squeaking noises, especially when there are significant temperature changes. Later, through my own research, I found that the main culprits are dust accumulation on the tracks or dry lubrication. Buying some specialized silicone grease and spraying it on the tracks immediately eliminates the noise. Remember to regularly clean the dust from the tracks and avoid using regular engine oil, as it tends to attract more debris, leading to more severe wear. Also, don't operate the sunroof too forcefully or frequently to reduce the burden on the gears and seals. Pay extra attention to maintenance during seasonal changes to prevent contraction and deformation. These simple maintenance steps can save a lot of repair troubles and make driving more comfortable and worry-free.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

How to set the tire pressure display for the 2021 Leiling?

2021 Leiling tire pressure display setting method is as follows: Press and hold the vehicle MENU button for more than three seconds to enter the settings. Press and hold the ADJ button for more than three seconds and maintain, the tire pressure value will change. Release when the desired value is reached, then press and hold the MENU button for more than three seconds. After hearing a beep, you can exit the menu to complete the setup. There are three common types of tire pressure monitoring methods: Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted from inside the tire to a central receiver module via a wireless transmitter, and then the tire pressure data is displayed. When the tire pressure is too low or there is a leak, the system will automatically alert. Indirect tire pressure monitoring: When the pressure in a tire decreases, the weight of the vehicle will cause the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speed between the tires, the purpose of monitoring tire pressure is achieved. Indirect tire pressure alert systems actually rely on calculating the rolling radius of the tires to monitor pressure. Introduction to the Tire Pressure Monitoring System (TPMS): It combines the advantages of the two systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a four-wheel indirect system is also equipped. Compared to using only a direct system, this hybrid system can reduce costs and overcome the defect of indirect systems being unable to detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data of the actual pressure in all four tires as a direct system does.
15
4
Share

What is the diameter difference between 19-inch and 20-inch wheels in centimeters?

19-inch and 20-inch wheels have a diameter difference of 2.54 centimeters. Additional information: 1. Wheel hub: The wheel hub is located inside the tire and serves to support the tire, with a cylindrical shape. It is a metal component mounted at the center on the axle. Also known as a rim or wheel. Wheel hubs come in various types based on diameter, width, manufacturing method, and material. 2. Wheel size: Wheel size essentially refers to the wheel diameter. Generally, 15-inch and 16-inch wheels are the most common, where 15 and 16 inches indicate the wheel size (diameter). For passenger cars, larger wheel sizes with correspondingly taller tires can create a visually appealing tension effect and improve handling stability, but they may also lead to increased fuel consumption.
3
4
Share

What Oil to Add When the Clutch Lacks Oil

When the clutch lacks oil, it can lead to poor mechanical working conditions, with the following details: 1, Sluggish response: The clutch may respond sluggishly or feel soft, or even fail completely, resulting in an abnormal sensation when pressing the clutch pedal. 2, Key issue: This is mainly because the lack of oil affects the clutch plates' ability to fully disengage, making it difficult to shift gears normally, which severely impacts the vehicle's normal operation. Additional information: Upon noticing any abnormal symptoms, the first step should be to check the oil level in the clutch reservoir. In most vehicles, the clutch reservoir shares the same container as the brake fluid reservoir. For such models, if the oil level is indeed low, simply adding some oil will suffice.
12
3
Share

What does the combination of white dashed lines and triangular markings on the road represent?

The combination of white dashed lines and triangular markings on the road represents entrance markings for roadways. Below are specific introductions to road markings: 1. White solid and dashed lines: When dashed lines are in the middle of a road section, their function is to separate same-direction traffic flows or serve as safe driving distance indicators. When at intersections, their role is to guide vehicle movement. Solid lines in the middle of road sections function to separate same-direction motor vehicles from non-motor vehicles or indicate the edge of traffic lanes. At intersections, solid lines serve as guiding lane markers or stop lines. 2. Double white solid and dashed lines: Dashed lines in the middle of road sections function as variable lane markers that change with driving directions over time. At intersections, they serve as yield lines. Solid lines at intersections function as stop lines.
20
4
Share

What are the yellow markings on the road?

Road surface yellow markings, specific details are as follows: 1. Single yellow dashed line: The yellow dashed line is also used to distinguish lanes in different directions, usually set on relatively narrow road surfaces. Whether it's a single or double yellow line, as long as it's dashed, you can cross the line to overtake or make a U-turn, of course, only under safe conditions. 2. Single yellow solid line: Used on roads with fewer central lanes, the single yellow solid line strictly prohibits vehicles from crossing, so driving on the line, overtaking, or making a U-turn is not allowed. When the yellow solid line is marked on the roadside or curb, it indicates that vehicles are prohibited from parking for a long time or temporarily on the roadside. 3. Double yellow lines are divided into center yellow solid and dashed lines and double yellow solid lines.
10
2
Share

Tire Height

Tire height is calculated as tread width X aspect ratio X 2 + rim diameter. The specific details are as follows: 1. Example: The height of a 195/60R14 tire is 195 X 60% X 2 + (14 X 25.4). Taking a tire with specifications of 185/60R14 as an example. 2. Rim diameter: 14 inches (355.6mm). 3. Sidewall height: 185 × 0.6 = 111mm. Additional information: The size and dimensions of a car tire are essentially its specifications and model, which are prominently marked on the tire. Understanding the meaning of the model and specifications on the tire is sufficient. Types of tires include: internationally standard tire codes, which represent the section width and aspect ratio percentage in millimeters. These are followed by: tire type code, rim diameter (in inches), load index (permissible load capacity code), and permissible speed code.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.