What Causes the Popping Sound from the Motorcycle Exhaust Pipe After Parking?

1 Answers
SanAaliyah
07/29/25 11:26am
If there is a popping sound from the exhaust pipe after the engine is turned off, it is a normal phenomenon. When a motorcycle engine is running, the temperatures of its various parts differ. After the engine stops working, under the influence of the ambient temperature, it gradually cools down. The high-temperature exhaust pipe and catalytic converter cool down quickly and undergo significant deformation, while the engine block cools down more slowly, leading to inconsistent deformation. This causes friction at the connection points, resulting in unusual noises after the motorcycle engine is turned off. The function of the motorcycle engine: To ignite the fuel-air mixture entering the cylinder, converting the thermal energy generated by combustion into mechanical energy, which is then transmitted through the crankshaft and drivetrain to the motorcycle's rear wheel, transforming it into the mechanical energy that propels the vehicle. Measures to reduce the sound from the motorcycle exhaust pipe: Clean carbon deposits from the engine, intake tract, and throttle body, as carbon buildup can obstruct exhaust flow, leading to increased noise. Check the valve clearance, the tension of the timing chain, and the fastening of the exhaust pipe, as loose fastening screws at the exhaust pipe head can cause exhaust leaks, resulting in louder noise. Inspect the exhaust pipe for damage or holes; small holes can be sealed firmly with aluminum foil tape. Check the condition of the internal muffler baffles; damaged baffles reduce sound-dampening effectiveness, leading to increased noise. Replace the exhaust pipe with a new one if necessary.
Was this review help?
16
0
Share
More Forum Discussions

What is the reason why the differential lock keeps beeping and cannot be turned off?

The reason why the differential lock keeps beeping and cannot be turned off is that the differential lock sensor switch is damaged. The following is an introduction to the differential lock: 1. The automobile differential is a mechanism that enables the left and right (or front and rear) drive wheels to rotate at different speeds. It is mainly composed of left and right half-shaft gears, two planetary gears, and a gear frame. 2. Its function is to allow the left and right wheels to roll at different speeds when the car is turning or driving on uneven roads, ensuring that both drive wheels perform pure rolling motion. 3. The differential is installed to adjust the speed difference between the left and right wheels. In four-wheel drive, in order to drive all four wheels, all wheels must be connected. If the four wheels are mechanically connected together, the car cannot rotate at the same speed when driving on curves. To ensure that the car's rotation speed is basically consistent when driving on curves, an intermediate differential is added to adjust the speed difference between the front and rear wheels.
9
2
Share

What is the name of the white paint for the Volkswagen Lamando?

The white paint for the Volkswagen Lamando is called Arctic White. Below is more information about the Volkswagen Lamando: 1. Power: The new car is divided into 280/230TSI models. The 280TSI is equipped with the EA211 1.4T turbocharged engine, paired with a DSG seven-speed dual-clutch transmission. It delivers a maximum power of 110kW (150PS) and a maximum torque of 250Nm, achieving a 0-100km/h acceleration time as fast as 8.5 seconds, with a combined fuel consumption of 5.6L per 100km. 2. Configuration: The new car features a brand-new in-car entertainment system, consisting of a 9.2-inch central control LCD screen and a 10.2-inch full LCD instrument panel, embedded with the Intelligent Connected System. In terms of safety features, the new car comes standard with the MKB Multi-Collision Brake System, while the top model is additionally equipped with a Front Assist system.
9
1
Share

Does shifting into P gear before the car stops have any impact on the vehicle?

Shifting into P gear before the car comes to a complete stop can cause significant damage to the vehicle's transmission system. If this practice is used frequently over time, it can lead to substantial wear and tear on the transmission, and in severe cases, may even render the transmission unusable. The correct procedure for parking and shifting gears is as follows: 1. Before parking, the car should first decelerate. Once the vehicle is completely stationary, shift from D gear to N gear, then engage the handbrake, release the foot brake, and turn off the engine. After turning off the engine, shift from N gear to P gear, and finally remove the key. It is important to note that for automatic transmission vehicles, the brake pedal must be pressed before parking; otherwise, gear shifting will not be possible. 2. If the car is parked for an extended period without turning off the engine, it is recommended to shift into N gear or P gear. Keeping the foot brake pressed for a long time can cause wear on the transmission system, increase fuel consumption, and accelerate the wear of the internal planetary gears in the automatic transmission, thereby reducing the lifespan of the vehicle's transmission system.
20
4
Share

What does China VI represent in terms of automotive emission standards?

China VI in automotive emissions represents the China 6 emission standard. Below is relevant information about China 6: Classification of China 6: The China 6 emission standard primarily refers to the exhaust emission standards for vehicles. The China 6 emission standard is divided into China 6a and China 6b. According to national regulations, starting from July 1, 2020, all light-duty vehicles sold and registered must meet the China 6a emission limits, while from July 1, 2023, all light-duty vehicles sold and registered must comply with the China 6b emission limits. Reasons for implementing the China 6 emission standard: The China 6 emission standard is more aligned with China's actual national conditions. The China 6b standard reduces carbon monoxide emissions by half compared to the China 5 standard, and the emission limits for carbon oxides have also been reduced by approximately half. The early implementation of the China 6 standard is also beneficial for environmental improvement.
15
3
Share

What to Do When Water Comes Out of the Exhaust Pipe in Winter?

During the operation of a car engine, water may sometimes be discharged from the exhaust pipe, especially in winter, which can be more noticeable. This might mistakenly be perceived as a cooling system malfunction or a leakage issue. In reality, water discharge from the exhaust pipe is a completely normal physical phenomenon and even an indication of complete gasoline combustion. The reasons for water in the exhaust pipe are as follows: 1. After gasoline combustion, it mainly produces carbon dioxide, water, and a small amount of carbon monoxide. For every 1 kilogram of gasoline mixed with air and burned, approximately 1.42 kilograms of water are produced, mostly discharged into the atmosphere in gaseous form. 2. Since the main muffler is located at the rear of the car where the temperature is relatively low and it has a multi-chamber structure, it is prone to water accumulation. When the engine runs at high speed, the accumulated water inside is expelled under the airflow, resulting in the commonly observed water ejection phenomenon. Vehicles frequently driven at low speeds on congested roads, especially in winter, may experience slightly more severe water accumulation in the muffler.
15
5
Share

How to Solve the Problem of Wipers Not Cleaning Properly?

Solutions for wipers not cleaning properly are as follows: 1. If the wipers are not cleaning properly due to the use of ineffective windshield washer fluid, you can switch to specialized wiper fluid. 2. In winter, if the wipers are not cleaning properly, it is mainly because there is a layer of frost on the windshield. In this case, turn on the air conditioning to melt the frost before using the wipers. 3. If the car has been parked for a long time and the windshield is covered with dust or leaves, clean it first before using the wipers. Daily maintenance tips for wipers are as follows: 1. Do not replace windshield washer fluid with tap water. 2. If the vehicle is parked for an extended period or in snowy weather, lift the wiper arms. 3. Always ensure the windshield is wet before using the wipers to avoid damaging the rubber blades by dry wiping. 4. In winter, if there is obvious snow or ice on the windshield, it is recommended to remove the snow or ice particles before using the wipers to prevent deformation.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.