What causes the P0700 transmission control module malfunction?

When can the S gear in an automatic transmission be used?

Automatic transmission S gear can be used when overtaking, going up or down slopes, and in traffic jams. When overtaking: The S gear can instantly provide high torque, allowing the car to accelerate quickly in a short time. When going up or down slopes: Whether ascending or descending, on steep and long slopes, using the S gear to downshift can utilize engine braking, reducing reliance solely on the brakes and enhancing driving safety. In traffic jams: The S gear can lock the gear in a low position, reducing wear and tear on the transmission caused by frequent gear shifts. The S gear is a sports mode. When switched to S gear, the car's power increases directly, turning into an aggressive mode, which is different from the usual gear. Therefore, prolonged use of the S gear can accelerate the wear of high-speed rotating components inside the engine due to this more aggressive driving mode.

11

0

Share

What Causes an Automatic Transmission Car to Fail to Upshift Automatically?

Automatic transmission cars failing to upshift automatically are mostly due to faults in the automatic transmission system. Below are detailed explanations: Transmission Faults: For example, common transmission slippage can cause the vehicle to fail to upshift automatically. Inappropriate Gear Selection: Additionally, selecting an inappropriate gear or not releasing the handbrake can also result in high engine RPM without a corresponding increase in speed. Solutions: First, check the fluid level of the transmission oil. If the level is too low or too high, adjustments should be made. Both low and high oil levels, as well as transmission oil leaks, can easily cause the oil pump to suck in air, leading to poor lubrication and inadequate operation, which in turn causes slippage. If the engine RPM suddenly increases when the automatic transmission shifts to a certain gear, but the vehicle speed does not increase accordingly, it indicates slippage in that gear. The easier it is for the engine RPM to rise during slippage, the more severe the slippage is. In such cases, it is advisable to pull over and wait for assistance to avoid further driving, which could lead to greater damage.

11

3

Share

Can I Have Items in the Trunk During a Vehicle Inspection?

Items in the trunk will not affect the vehicle inspection, as emptying the car is not required when undergoing an inspection on the testing line. However, overloading the trunk can increase the vehicle's weight, leading to higher fuel consumption than normal. It's advisable to remove unnecessary items to reduce the vehicle's weight. Tips for trunk usage: 1. Avoid perishable food: Items like fruits and vegetables that spoil easily can rot quickly in hot weather. Additionally, owners are reminded never to place watermelons in the trunk. If not secured properly, watermelons can easily break during sudden braking, making a mess that's hard to clean. 2. Avoid heavy items: It's best not to store heavy objects in the trunk, as they can cause the shock absorbers and suspension to work under high load. When driving over bumpy roads, the shock absorbers may bottom out. 3. Hazards of overloading: Prolonged overloading can wear out tires, brakes, and shock absorbers. Driving uphill with a full load for extended periods can raise the engine's operating temperature, while downhill driving can overheat the brakes, reducing their effectiveness.

12

3

Share

What does the forward gear in an automatic transmission car refer to?

Automatic transmission car's forward gear is the D gear. Automatic transmission gears: There are six positions for automatic transmission car gears: P gear is the parking gear and starting gear, preventing the car from rolling; R gear is the reverse gear for backing up; N gear is the neutral gear for temporary parking; D gear is the forward gear and drive gear, where the transmission automatically shifts between gears 1-5 based on speed and throttle conditions; S gear is the sport mode, allowing free gear shifting but increasing fuel consumption; L gear is the low gear, keeping the transmission in 1st gear without upshifting, providing some braking function when going downhill and can be used in situations like slopes. The advantage of automatic transmission over manual transmission is that it does not require shifting gears while driving, making it easier to operate. Additionally, automatic transmissions include continuously variable transmission (CVT), electronic paddle shifters, and electronic gear shift levers. How to use the forward gear: After getting into the car, first press the brake pedal and start the engine. Do not release the brake pedal at this time. Shift into D gear, then release the brake pedal, and the car will move forward.

11

4

Share

What does M1 and M2 mean in an automatic transmission?

In an automatic transmission, M1 refers to the first gear in manual mode, and M2 refers to the second gear in manual mode. M1 is typically used for normal starts or climbing steep slopes, with speeds around 10 kilometers per hour. M2 is used for accelerating after starting, driving at low speeds near other vehicles, or climbing steep slopes, with speeds around 20 kilometers per hour. You can switch directly between M mode and D mode without any time or RPM restrictions. The transmission will automatically match the appropriate gear based on the real-time speed. When in M mode, the dashboard will display the current gear, and you can shift up or down by pushing or pulling the gear lever. If the gear is in D mode and you want to overtake, the speed won't increase rapidly even if you press the accelerator hard, as the transmission will still shift up sequentially, resulting in a slower response time. However, if you switch to M mode, the vehicle can utilize the high torque of a lower gear to accelerate instantly when the driver presses the accelerator, allowing for quicker and safer overtaking maneuvers while saving time.

8

5

Share

What Octane Gasoline is Suitable for Volkswagen Sagitar?

"The Sagitar should use 95 octane gasoline. This octane rating is recommended in the vehicle's official user manual. In addition to checking the appropriate gasoline octane in the user manual, you can also find it on the fuel tank cap, which will also indicate the recommended octane. Generally, the octane can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is higher, 98 octane gasoline is recommended. However, with the use of new technologies, the octane cannot be solely determined by the compression ratio. Engines with high compression ratios can also be tuned to use lower octane gasoline because, apart from the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane, the higher the octane rating and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Sagitar occasionally uses the wrong octane gasoline, simply switch back to the correct octane after consumption. However, long-term use of the wrong octane can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Due to the significantly lower octane rating, the gasoline's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it may only increase noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring."

15

4

Share

What causes the P0700 transmission control module malfunction?

When can the S gear in an automatic transmission be used?

What Causes an Automatic Transmission Car to Fail to Upshift Automatically?

Can I Have Items in the Trunk During a Vehicle Inspection?

What does the forward gear in an automatic transmission car refer to?

What does M1 and M2 mean in an automatic transmission?

What Octane Gasoline is Suitable for Volkswagen Sagitar?

What does D2 mean in an automatic transmission?

What Causes High Temperature in Audi?

Should an automatic car be shifted to neutral when waiting at a traffic light?

What does the N gear in an automatic transmission car mean?