What Causes the Noise When Turning?

1 Answers
MacLuna
07/29/25 1:21pm
Possible causes of noise when the vehicle is turning: Aging or excessive play in the steering tie rod ball joint, which requires replacement of the steering tie rod ball joint. Additionally, a wheel alignment must be performed after replacement. Here are the relevant details: 1. Timely Inspection: When abnormal noise occurs during vehicle turning, the owner should not take it lightly. It is essential to promptly inspect the chassis and steering components to eliminate the fault, thereby avoiding the risk of steering failure while driving. 2. Steering Mechanism: The steering mechanism is a crucial part of the vehicle's chassis and is also referred to as a safety component. It allows the driver to control the vehicle according to their intentions. Therefore, attention should also be paid to the maintenance of the steering system during daily vehicle use.
Was this review help?
1
3
Share
More Forum Discussions

What does an 'i' inside a box mean on the car?

An 'i' inside a box is the information indicator light. Generally, when this light illuminates, it indicates there's some information the vehicle owner needs to check. The dashboard warning lights use three colors (green, yellow, and red) to differentiate their meanings. Details are as follows: 1. Green: Indicates normal operation of vehicle functions. 2. Yellow: Represents a warning light. 3. Red: Requires special attention. Normally, illumination of a red light indicates a fault that could endanger personal safety. The driver should immediately stop to inspect the specific issue and arrange for timely professional inspection.
9
5
Share

Where is the fuse box of the new Bora?

The fuse box of the new Bora is located on the side of the main driver's center console. After opening the main driver's door, you can see it by prying open the cover on the side of the main driver's center console. Every car has a fuse box, and generally, cars have two fuse boxes, one in the cabin and another in the engine compartment. Some cars have fuse boxes in the trunk. The fuse box contains fuses, which are used to protect the circuit. When the current in the circuit is too high, the fuse can protect the circuit by melting itself. The new Bora has a body length, width, and height of 4663mm, 1815mm, and 1473mm respectively, with a wheelbase of 2688mm.
3
4
Share

What License is Required to Drive a Yellow License Plate Car?

Yellow license plate cars require a B or A class driver's license. Below are relevant details about yellow license plate vehicles: 1. Yellow license plate vehicles are categorized into large trucks and large buses. Large trucks require a B2 or A2 license, while large buses require an A1 license. 2. Yellow license plate vehicles generally refer to large vehicles, such as trucks weighing over 2 tons or buses (including vans with 12 or more seats). Below is an introduction to vehicle license plate colors: 1. The majority of commercial vehicles and motorcycles have yellow license plates. 2. Large civilian vehicles have license plates with a yellow background and black characters. 3. Small civilian vehicles have license plates with a blue background and white characters.
19
1
Share

What suspension does the Foton Midi use?

Foton Midi uses MacPherson independent suspension for the front suspension and a trailing arm torsion beam independent suspension for the rear suspension. Here are some relevant details: 1. Common independent suspensions used in automobiles include MacPherson suspension, double-wishbone suspension, double-ball-joint suspension, double-wishbone suspension, and multi-link suspension. 2. Most vehicles use MacPherson suspension for the front suspension, and some vehicles also use MacPherson suspension for the rear suspension, such as the Porsche 718. MacPherson suspension is the simplest independent suspension in structure, the lowest in cost, and the most widely used independent suspension. The MacPherson suspension has only one L-shaped control arm, and this suspension hardly occupies any engine compartment space.
15
2
Share

How to Set Up Automatic Mirror Tilt When Reversing in a Mercedes-Benz?

Mercedes-Benz automatic mirror tilt setting method is as follows: 1. Turn on the car's power but do not start the engine. 3. Select the side mirror you want to set by pressing the mirror adjustment selection button (left or right). 4. Step on the brake, shift to R gear, at this time the selected mirror will automatically tilt down to the factory preset position, then use the 4-way adjustment button to adjust it to your desired position. 5. Press and hold the seat memory button (1, 2, or 3) for about 2 seconds, choose which memory position you want to save to. 6. Step on the brake, shift to P gear, and press the mirror adjustment selection button once more to complete the setup.
11
5
Share

What is the TIGUAN?

TIGUAN is a compact SUV under Shanghai Volkswagen, with the Chinese brand name 'Tiguan'. The dimensions of the Volkswagen Tiguan are 4712mm in length, 1839mm in width, and 1673mm in height, with a wheelbase of 2791mm. The Tiguan is equipped with three engines: a 1.4-liter turbocharged engine, a 1.8-liter turbocharged engine, and a 2.0-liter turbocharged engine. The 1.4-liter turbocharged engine delivers 150 horsepower and a maximum torque of 250 Nm; the 1.8-liter turbocharged engine produces 160 horsepower and a maximum torque of 250 Nm; and the 2.0-liter turbocharged engine generates 200 horsepower and a maximum torque of 280 Nm.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.