What Causes the Noise in Electronic Parking Brake?

1 Answers
SanCarmen
07/24/25 7:07pm
Electronic parking brake noise is a normal phenomenon, as the sound of brake fluid flowing can be heard when engaging or releasing the parking brake. Electronic Parking Brake: The electronic parking brake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both achieving parking braking control through the friction generated between the brake disc and brake pads. The only difference is that the control method has changed from the previous mechanical handbrake lever to an electronic button. Basic Functions: The application of automatic parking technology allows drivers to avoid prolonged braking when the vehicle is stopped. Additionally, when the automatic electronic parking brake is activated, it prevents unnecessary sliding of the vehicle. Simply put, the vehicle will not roll backward.
Was this review help?
10
4
Share
More Forum Discussions

Detailed Deduction Items for the Slope Section in Subject 2

Subject 2 examines the following test items: slope starting and fixed-point parking, parallel parking, curve driving, right-angle turning, and reverse parking. The total score is 100 points, with 80 points required to pass for both C1 and C2 driver's licenses. Below are the deduction standards for the slope starting section in Subject 2: After the vehicle stops: If the front bumper of the car or the front axle of the motorcycle is not positioned on the pole line and exceeds 50 cm forward or backward, it results in failure; if the body is more than 30 cm away from the roadside line, 10 points are deducted; if the body is more than 50 cm away from the roadside line, the test is failed; if the vehicle rolls backward between 30 cm and 50 cm, 20 points are deducted; stalling on the slope: stalling on the slope results in a 20-point deduction.
19
1
Share

Is the sound caused by shifting into P gear before the car stops completely serious?

Shifting into P gear before the car stops completely can cause relatively serious impacts. Reasons for the impact: The mechanical impact sound from the automatic transmission and brake gear will subject the locking function of the transmission to considerable pressure. At this time, the gears of the transmission have not yet stopped working, and directly shifting into the parking gear can easily damage the gears. Therefore, before shifting into P gear, it is necessary to ensure that the car has come to a complete stop. P gear: It is the most common gear in automatic transmission models, usually located at the front position of the gear shift console, in front of the R gear. Its purpose is to lock the axle when the car is stationary on a slope. All gear operations related to P gear require the cooperation of the brake pedal and the button on the gear shift lever or the depression of the shift handle.
12
3
Share

Which Fuse is for the Car Cigarette Lighter?

The fuse for the car cigarette lighter is generally located on the lower left side of the steering column (this may vary depending on the vehicle model). Additional Information: Cigarette Lighter: The cigarette lighter is a feature in cars. With the evolution of automobiles and changing consumer needs, the cigarette lighter socket can often be equipped with a car power inverter for charging mobile electronic devices, among other uses. The central spring-loaded contact in the socket is the positive terminal, while the side clips serve as the negative terminals. The power supply is directly connected to the car battery, sharing the same current and power specifications as the battery. Function: Besides serving its traditional purpose, the car cigarette lighter can also be fitted with a power inverter that converts the car's 12V, 24V, or 48V DC power into 220V/50Hz AC power, suitable for powering general electrical appliances. For example, it can be used to charge mobile electronic devices.
4
4
Share

What are the reasons why the Fiat key cannot be pulled out?

Fiat key cannot be pulled out for the following reasons: Steering wheel locked: Manifested as the steering wheel cannot be turned and even the key cannot be pulled out. First insert the key, then try to turn the steering wheel left and right while turning the key. P gear not in place: When getting off the car, the gear was not shifted to P gear, or the P gear was not truly in place because something blocked it and did not touch the electronic sensor. Just shift the gear correctly into P gear again. Foreign object blocking in the slot: When parking, there was a foreign object stuck in the key slot. Remove the foreign object, start the car, shift the gear again, confirm that it is completely back in place, and the key can be pulled out.
9
0
Share

How Long Does It Take to Notice Fake Engine Oil?

Generally, symptoms such as increased noise and insufficient power will appear within 10,000 kilometers. Notes on selecting engine oil for new cars: New cars are still in the break-in period, so special attention should be paid to the selection of engine oil. The grade of the oil should not be too low, and the viscosity should not be too high. Notes on not mixing different types of engine oil: Special gasoline engine oil cannot replace diesel engine oil, mainly to avoid accelerating the wear of diesel engines. Single-grade and multi-grade oils should not be mixed. Different brands of the same type of oil can be temporarily mixed, but long-term mixing should be avoided. Notes on frequently checking oil levels: When using engine oil, it is essential to regularly check the quality and quantity of the oil in use. Only when the crankcase has sufficient oil can the engine maintain a normal lubrication state.
7
3
Share

What does electronic fuel injection mean for motorcycles?

Electronic fuel injection is a type of engine. The following are detailed explanations: The difference between electronic fuel injection and carburetor engines is also quite distinct in terms of operation methods. When starting an electronic fuel injection engine (including cold starts), there is no need to press the accelerator. This is because electronic fuel injection engines are equipped with cold start enrichment and automatic fast idle functions, ensuring smooth starts whether the engine is cold or warm. Important notes: Before and during engine startup, repeatedly pressing the accelerator pedal rapidly to increase fuel injection, as one might do with a carburetor engine, is ineffective. The accelerator pedal in an electronic fuel injection engine only controls the throttle opening; the fuel injection amount is entirely determined by the engine control unit based on intake air parameters. Additionally, an electronic fuel injection engine should not be operated for extended periods with low fuel in the tank, as the electric fuel pump relies on the flow of fuel for cooling.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.