What Causes the Noise from the Right Front Wheel That Disappears After Driving for a While?

1 Answers
StTravis
07/30/25 1:22am
The reason is due to: The noise from the right front wheel that disappears after driving for a while is caused by severely worn brake pads, damage to the right front wheel shock absorber, deformation of the right front wheel hub, wear on the right front wheel tire, or damage to the drive shaft. Severely worn brake pads: When the thickness of the car's brake pads wears down to below 5 millimeters, the braking force will significantly decrease, and symptoms such as abnormal steering noise may occur. In this case, the brake pads should be replaced promptly. Damage to the right front wheel shock absorber: If the right front wheel shock absorber is damaged, abnormal noise will also occur. At this time, the car should be lifted for a detailed inspection. Deformation of the right front wheel hub: Deformation of the right front wheel hub will cause abnormal noise during driving. For safety reasons, it is best to replace the hub. Wear on the right front wheel tire: When the right front wheel tire is excessively worn or punctured by nails, stones, etc., it can also produce abnormal noise. Further inspection should be conducted at a repair shop. Damage to the drive shaft: Damage to the car's drive shaft is also one of the causes of tire noise, and it needs to be lifted for further inspection.
Was this review help?
14
0
Share
More Forum Discussions

What Causes a Sudden Increase in Engine Noise in Small Cars?

Reasons for a sudden increase in engine noise in small cars: engine overheating leading to loss of power; internal engine issues, such as valve blockage. Engine Overheating: If the engine operates for an extended period, causing surface overheating, the cooling system may fail. The first step is to check the cooling system. If there's an issue with the cooling system, it could lead to exhaust blockage, as the vacuum tube might be prone to breaking. Internal Engine Issues: Check the cooling system to see if the coolant level is normal. Then, inspect the oil pressure gauge to determine if the issue is related to oil pressure or ignition problems.
10
2
Share

How to Replace a Car Timing Belt?

The method for replacing a car timing belt is as follows: 1. Lift the vehicle and remove the right front wheel fender liner; 2. Remove the generator belt tensioner; 3. Loosen the crankshaft pulley screw; 4. Remove the engine mounting bracket and the protective cover on the timing belt; 5. Remove the lower cylinder block mounting bracket and take off the crankshaft pulley; 6. Rotate the crankshaft to the top dead center position of the cylinder and mark it; 7. Remove the timing belt and the timing tensioner to complete the replacement. The timing belt is an important component of the engine's valve system. It is a rubber part and its functions are: 1. To ensure the accuracy of intake and exhaust timing; 2. To ensure the synchronization of engine ignition and cylinder movement; 3. To ensure the smooth output of engine power.
15
3
Share

Is Subject One Easy?

Subject One is the theoretical knowledge for beginners, which is relatively simple, and much of the content is common sense, making it easy to understand and remember. Test-takers only need to practice more exercises to enhance their memory, and passing the Subject One exam is not difficult. Below is an introduction to Subject One: 1. Exam Process: The total time for the Subject One exam is 45 minutes, with the test paper consisting of 100 questions, including true/false and multiple-choice questions. The full score is 100, and a passing score is 90. The test papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations." 2. Exam Arrangement: Subject One refers to the driver's theoretical test, conducted at the vehicle management office, which is a mandatory licensing exam for all driver's license applicants. The schedule for the driver's theoretical test is arranged independently by local vehicle management offices.
18
1
Share

What colors are available for the Toyota Levin?

Toyota Levin is available in a variety of colors including Pearl White, Amber Brown, Crystal Silver, Sapphire Blue, Lightning Orange, Red Mica Metallic, Black Mica Blue, Metallic Silver, Metallic Orange, and Metallic Gray. Below is an introduction to the Toyota Levin: 1. The dimensions of the Toyota Levin are 4640mm in length, 1780mm in width, and 1435mm in height, with a wheelbase of 2700mm. 2. In terms of powertrain, the gasoline version is equipped with a 1.2T+CVT combination, delivering a maximum power of 85kW and a peak torque of 185N·m. The hybrid model features a 1.8L Atkinson cycle engine and Toyota's THS II hybrid system, with the engine producing a maximum power of 72kW and a peak torque of 142N·m, while the electric motor delivers a peak power of 53kW and a peak torque of 163N·m, resulting in a combined system power of 90kW.
20
1
Share

What Causes Occasional Difficulty in Shifting Gears in a Manual Transmission?

Occasional difficulty in shifting gears in a manual transmission is typically a clutch-related issue. Below are solutions for gear-shifting problems: Inspect Components: If the transmission fluid hasn't fully lubricated the system, starting the engine and letting it run for a while before shifting may resolve the issue. If internal transmission components such as gears, synchronizers, or shift forks are damaged, repairs will be necessary. Check the Clutch: If the clutch isn't fully disengaging, try pressing the clutch pedal firmly to the floor to see if shifting becomes possible. If clutch components are damaged, repairs or replacements (such as friction discs, pressure plates, or release bearings) will be required. Examine the Shift Linkage: If gear-shifting difficulty is caused by worn shift linkage, attempting to shift multiple times may temporarily resolve the issue.
17
2
Share

Can You Wear Sunglasses While Driving?

You can wear sunglasses while driving, but wearing sunglasses reduces the amount of light entering your eyes, making objects ahead appear darker, which may hinder the driver's ability to clearly see the road conditions. Here is some related information about wearing sunglasses while driving: 1. Polarized Lenses: Polarized lenses allow directional light to pass through. To put it vividly, it can be compared to the effect of blinds. When the blinds are adjusted to a horizontal state, you can see the scenery outside while avoiding the glare of sunlight. Therefore, lenses with polarization can filter out dazzling glare caused by scattering, refraction, reflection, and other factors. 2. Gradient Sunglasses: These sunglasses are commonly known as 'gradient' sunglasses and are more user-friendly than solid-color sunglasses. Since the purpose of wearing sunglasses is to block the glaring sunlight, which comes from above, the darker upper part and lighter lower part ensure that you are not blinded by the sun while still being able to see objects below. However, these sunglasses still have shortcomings for driving purposes.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.