What Causes the Noise During Low-Speed Turns?

1 Answers
JeremiahLynn
07/29/25 7:03pm
The reasons for noise during low-speed turns include: tire bulges, loose ball joints in the steering tie rod, increased wear gaps in the steering linkage mechanism, and worn upper bearings in the shock absorbers, all of which can cause abnormal noises when the car turns at low speeds. To address abnormal noises during low-speed turns, check the following four points: 1. Ensure proper coordination between the throttle and gear during turns; 2. Check for unsecured items like water bottles or other objects inside the car that may move and collide during turns, causing noise; 3. Clutch noise: When the engine is idling, pressing the clutch pedal may produce abnormal noise, which disappears upon releasing the pedal. Sometimes, noise may occur both when pressing and releasing the pedal; 4. If the noise is not from the shock absorber, inspect the stabilizer bar bushings for looseness or damage. Loose or damaged stabilizer bar bushings can cause noise not only during steering but also when driving on uneven roads. Looseness can be fixed by adding shims, but damaged bushings must be replaced.
Was this review help?
10
0
Share
More Forum Discussions

How to Check if a Vehicle Has an ETC Account?

Currently, there is no online channel to check whether your new car has been registered for ETC by the previous owner. You can only inquire at a bank branch by bringing relevant documents such as your ID card and vehicle license. ETC Usage Notes: The ETC transaction sensing range is 8 meters. When the vehicle in front stops, to prevent the ETC device of the front vehicle from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters from the front vehicle to avoid automatic payment for the front vehicle. The recognition speed for ETC lanes is 20km/h. If the vehicle speed is too fast, the vehicle device information cannot be read, which will also result in a failed payment. Unauthorized removal or movement of the OBU device, detachment or loosening of the ETC electronic tag, etc., will cause the electronic tag to become invalid. It can be sent to the bank where the ETC card was issued or the highway service office for testing. If the loosening or detachment is not due to human factors, it only needs to be reactivated.
15
4
Share

What car is the T?

Tesla is an American electric vehicle and energy company that manufactures and sells electric vehicles, solar panels, and energy storage equipment. Headquartered in Palo Alto, Silicon Valley, California, USA, it was initially founded in 2003 by Martin Eberhard and Marc Tarpenning. In 2004, Elon Musk joined the company and led the Series A funding. The founders named the company Tesla Motors. Tesla's main models include Model Y, Model 3, Model S, Model X, and Model 3 (imported). 22 Model Y: Dimensions 4750x1921x1624 (mm), wheelbase 2890mm, positioned as a mid-size SUV. 22 Model 3: Dimensions 4694x1850x1443 (mm), wheelbase 2875mm, positioned as a mid-size sedan. 21 Model X: Dimensions 5037x2070x1684 (mm), wheelbase 2965mm, positioned as a mid-to-large SUV. 21 Model S: Dimensions 4379x1964x1445 (mm), wheelbase 2960mm, positioned as a mid-to-large sedan. 19 Model 3 (imported): Dimensions 4694x1850x1443 (mm), wheelbase 2875mm, positioned as a mid-size sedan. The development history of Tesla is as follows: In 2002, engineer Al Cocconi, who participated in the EV-1 project, founded an electric vehicle company called AC Propulsion in California, producing the T-Zero, a lead-acid battery car for single-person use. On July 1, 2003, Martin Eberhard and his long-time business partner Marc Tarpenning jointly established Tesla Motors, with headquarters in Silicon Valley, California, USA. In 2003, after switching to lithium batteries, the T-Zero achieved a range of 480 kilometers. Tesla spent about five years refining the Roadster before bringing it to market. In February 2008, Tesla began delivering the first Roadster. On June 22, 2012, at Tesla's factory in Fremont, California, the first electric sports car in the company's new "Model S" series was officially delivered. On February 1, 2017, Tesla Motors Inc. officially changed its name to Tesla Inc.
16
4
Share

What is the transmission model of the Porsche Panamera?

The transmission brand used in the Porsche Panamera is the PDK dual-clutch transmission. Porsche's PDK dual-clutch transmission was developed in collaboration with Germany's ZF Group. It is a dual-clutch transmission known for its fast shifting speed, high reliability, and stability. The Porsche Panamera uses an 8-speed wet dual-clutch transmission. A wet dual-clutch transmission refers to a dual-clutch transmission where the clutch plates are immersed in transmission fluid. There are two types of dual-clutch transmissions: dry and wet. When using the Porsche Panamera's transmission in daily driving, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged failure to change the transmission fluid can lead to damage to internal components such as bearings and the housing. Avoid prolonged coasting in neutral. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, coasting in neutral can cause the transmission to overheat and may result in a jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Many drivers, aiming for smooth operation, shift into reverse while the vehicle is still moving, which can cause significant damage to the transmission gears and, over time, lead to gear grinding or other failures. Avoid frequently climbing steep hills in Drive (D). When facing steep inclines, automatic transmission vehicles may overheat due to high load or shift prematurely, resulting in insufficient power. In such cases, use manual mode to limit lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to move the vehicle onto the tow platform while it is in Neutral (N). Do not use a tow rope or tow the vehicle directly with another vehicle.
1
0
Share

Can I bring a seat cushion for Subject 2?

Some vehicles with non-adjustable seat heights may allow the use of seat cushions. Here is an introduction to Subject 2: Definition: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination and refers to the field driving skill test. Objective: To master the basic driving operation essentials, possess the fundamental ability to control the vehicle; proficiently master the basic methods of field and in-field road driving, have the ability to reasonably use vehicle control components and correctly control the vehicle's spatial position, and accurately control the vehicle's driving position, speed, and route.
9
4
Share

How to Repair Detached Car Door Panel Upholstery?

Detached car door panel upholstery can be repaired by spraying eco-friendly adhesive spray on the affected area. Here are some precautions regarding the repair process: 1. Note 1: Check the aging and damage condition of the sponge layer beneath the detached fabric or leather on the car door panel. 2. Note 2: If the sponge layer is severely aged or damaged, use a towel to thoroughly clean it, as residual sponge particles may affect the adhesive's bonding effectiveness. 3. Note 3: Press the repaired area flat. Since the adhesive used for repair is slow-drying, it requires prolonged pressing. Alternatively, small thumbtacks can be used to secure the repaired area until the adhesive is completely cured, after which they can be removed.
7
3
Share

Is it necessary to transfer the file for motorcycle ownership transfer within the province?

For motorcycle ownership transfer within the province, most cities do not require file transfer. Here is some relevant information about motorcycles: 1. Introduction: A motorcycle, driven by a gasoline engine, is a two- or three-wheeled vehicle steered by handlebars for front-wheel turning. It is lightweight, flexible, and fast, widely used for patrol, passenger and cargo transportation, and also serves as sports equipment. 2. Classification: Broadly speaking, motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc. 3. Basic components: A motorcycle consists of five main parts: the engine, transmission system, running gear, steering, braking system, and electrical instrumentation equipment.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.