What causes the no signal issue in the CS75 reversing camera?

1 Answers
McHarmony
07/25/25 4:50pm
The no signal issue in the Changan CS75 reversing camera is typically caused by a disconnected or poorly connected data cable of the reversing camera, or a damaged reversing camera. Below is an introduction to related content about Changan vehicles: 1. Exterior: The design adopts a stable and rugged style, aligning with public aesthetics. The moderate design is easily accepted by the public. Changan Oushang caters to consumer preferences in product design, with a focus on high cost-performance in detail design. 2. Body dimensions: The length, width, and height are 4705mm, 1860mm, and 1720mm respectively, with a wheelbase of 2780mm. 3. Interior: The vehicle is equipped with a 7-inch LCD instrument panel and a 10.25-inch central LCD screen, featuring the OnStyle 2.0 intelligent connectivity system that integrates mainstream functions such as internet connectivity, navigation, and music, along with a 360-degree panoramic imaging system. 3. Powertrain: It is powered by a 1.5TGDI engine, paired with a 6-speed manual or 7-speed dual-clutch transmission.
Was this review help?
16
5
Share
More Forum Discussions

What are the differences between Volkswagen Santana V and VI?

Differences between Volkswagen Santana V and VI: 1. Different configurations: The V version comes standard with driver and passenger airbags, ABS anti-lock braking, brake force distribution, and engine start-stop; the VI version comes standard with driver and passenger airbags, ABS anti-lock braking, brake force distribution, tire pressure monitoring, brake assist, electronic stability control, and engine start-stop. 2. Different acceleration times: The V version accelerates from 0-100 km/h in 13.5 seconds; the VI version accelerates from 0-100 km/h in 12.6 seconds. The Santana features a clean overall design with no exaggerated lines. The waistline running from front to rear gives the body a dynamic appearance. The chrome trim below the windows is simple yet aligns with Chinese consumers' aesthetic preferences. The multi-spoke wheels complement the body well, while the rear wheels still use large drum brakes.
20
2
Share

What does reartemp mean in a car?

rear-temp on the air conditioning refers to the rear temperature control, which adjusts the temperature for the rear seats. The word "rear" literally means the back or rear part, and the rear button in a car's air conditioning system is actually the rear window defogger button. Nowadays, many car models omit the English word "rear" and simply use an icon instead. Additional information: To adjust the temperature settings, turn the temperature knob clockwise or counterclockwise to increase or decrease the temperature. The temperature for the driver's seat, front passenger seat, and rear seats can be adjusted separately: Press the SYNC button (the SYNC display will disappear), then turn the front passenger side temperature knob. (The PASS SYNC display may also switch to PASS). Press PASS-SYNC to synchronize the upper or lower side. (REAR-SYNC may also display as REAR). Each time the SYNC button is pressed, the air conditioning system will switch between independent mode and synchronized mode.
11
5
Share

Reasons for Volkswagen Sharan's Lack of Power While Driving

Vehicle lacks power while driving, check spark plugs, check if there is an issue with the coasting mode, check the transmission. Check spark plugs: If there is a problem with the spark plugs, shaking during gear shifting and acceleration can cause the car to lose power and drive weakly. It is necessary to check whether the spark plugs have carbon deposits, whether the ignition center is intact, and whether there is any air leakage. Check coasting mode: Turn off the vehicle's coasting mode. If you encounter gear dragging again, activate the cruise control, and the RPM will immediately increase, or switch to manual mode and force a downshift. Check transmission: Check the transmission by reading data at a 4S shop to rule out transmission problems that may cause weak acceleration or failure to move after shifting gears.
13
5
Share

Is it safe to drive with the DPF light on in a diesel vehicle?

DPF light on can run a high speed, let the vehicle in the state of more than 80km/h high speed driving, continue to maintain the normal driving state, the time is at least more than half an hour, after the completion of particulate matter processing, DPF indicator light will automatically go out. The following is more information about the DPF light: 1, Brief description: DPF is the diesel particulate filter, also known as the diesel particulate trap regenerator. 2, Working principle: DPF generally adopts the wall-flow filter, relying on alternately blocking the inlet and outlet of the carrier hole, forcing the airflow through the porous wall to achieve the capture of particles.
19
1
Share

Where is the fuel tank located on the BMW 7 Series?

BMW 7 Series fuel tank cap does not have a physical button for opening. As is widely known, the BMW 7 Series uses an electronic remote key central locking system. When the car is unlocked and the key is nearby, simply press the fuel tank cap lightly, and it will open automatically. Opening Method 1: Use the remote key to unlock the BMW vehicle. The fuel tank of the BMW 7 Series is located on the right side of the car. When refueling, pay attention to the direction of the fuel tank opening, and press the fuel tank cap lightly to open it. Opening Method 2: After the outer fuel tank cap is opened, the inner fuel tank cap can be unscrewed and placed in the designated position for the inner cap.
7
3
Share

Where is the Passat Data Bus Diagnostic Interface Located?

Passat data bus diagnostic interface is located below the dashboard. Data Bus Diagnostic Interface: "On-Board Diagnostic System", the OBD diagnostic connector, serves as the bridge connecting the computer to the vehicle diagnostic system. There are actual wires between the control units on the bus system, generally twisted pair wires, though single wires are also used. Since the data transmission rates between various controllers differ, yet they need to communicate with each other, a gateway with information exchange functionality is established. It is also a control unit, either standalone or integrated into another control unit. Functions: As vehicle control networks continue to evolve, a large amount of data information needs to be transmitted between systems. Without altering the data, the interface transmits diagnostic information from the drive line, comfort bus, entertainment bus, and instrument bus.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.