What Causes the Musty Smell in Car Air Conditioning?

1 Answers
DeEli
07/29/25 1:44pm
The musty smell in car air conditioning can be attributed to the following reasons: 1. The system has been running for a long time, leading to dust accumulation between the heat exchanger fins, causing blockage; Solution: Clean the heat exchanger fins. 2. Dust adhering to the air outlet of the indoor unit and the surface of internal components, which is difficult to avoid even in special environments like computer rooms or hotel rooms where the air is filtered; Solution: Clean the air outlet and internal components. 3. Condensation water retained on the heat exchange coils, fins, and surrounding components slowly evaporates, creating a high-temperature condition around the coils suitable for microbial growth. The large amount of gas produced during microbial reproduction is released by the air conditioning system, becoming the source of the foul odor. Solution: Thoroughly clean the evaporator box of the air conditioning system. Professional no-disassembly cleaning agents can be used, or it can be removed for cleaning, but this method requires recharging the refrigerant. Since most foreign matter is adsorbed on the evaporator core, the odor is emitted accordingly.
Was this review help?
20
1
Share
More Forum Discussions

How to Deal with Fogging on the Windows?

Turn on the heater, and the fog will disappear. Opening the window can dissipate the heat, and the fog will disappear. Apply it to the windshield, and the fog will disappear. Adjust the temperature to a close value, and the fog will disappear.
6
3
Share

How to Align the Door Handle for a Right-Angle Turn?

Drive the vehicle into the right-angle turn test area. Before turning, turn on the right turn signal, keep the vehicle close to the left side. When the door handle aligns with the yellow line on the right, turn the steering wheel fully to the right and make a smooth right turn. After turning the steering wheel, when the front of the vehicle and the body are about to align with the lane, quickly straighten the steering wheel and continue moving forward.
4
3
Share

How to do karaoke in the car?

Connect the microphone and headphones in the car using an audio recording cable. Tune the FM radio to 87.5. Turn on the microphone power switch and adjust the volume and echo to the appropriate levels.
1
2
Share

What are some simple methods to puncture a car tire?

Insert a specialized rubber strip into the punctured area of the tire. Remove the damaged tire from the rim, locate the puncture, and then apply a dedicated tire repair patch from the inside of the tire to complete the repair. Pry off the tire, attach a dedicated raw rubber patch to the puncture, and then use a heating machine to bake the puncture until the raw rubber patch fully adheres to the tire.
13
2
Share

How to Align and Steer for Reversing into the Garage in Pickup Truck Subject 2 Test?

Drive the vehicle into the test area, maintaining an appropriate distance between the car body and the garage boundary line. Stop after the front wheels cross the yellow line. Depress the clutch, shift into reverse gear, and slowly reverse. When the lower edge of the left rearview mirror aligns with the yellow line, turn the steering wheel fully to the right and continue reversing. Pay attention to the rearview mirror. When the car body is parallel to the garage boundary line, quickly straighten the steering wheel. Observe the left rearview mirror and stop when its lower edge aligns with the yellow line.
12
1
Share

What does MPI mean on a car?

MPI on a car refers to the Multi-Point Injection system, also known as multi-point electronic fuel injection, sequential fuel injection, or individual fuel injection. In contrast to single-point injection, the multi-point injection system is equipped with one injector at the intake port of each cylinder. Controlled by the electronic control unit, it performs separate or grouped injection for each cylinder. Gasoline is directly injected in front of the intake of each cylinder and then mixes with air to form a combustible mixture before entering the cylinder. The characteristics of the multi-point injection system include: 1. Avoiding uneven air distribution and power loss caused by overlapping intake in adjacent cylinders; 2. Precise control over fuel injection quantity and timing based on the engine's timing. The forms of multi-point fuel injection include: simultaneous injection, grouped injection, and sequential injection.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.