What Causes the Malfunction of Mercedes-Benz Reversing Camera?

1 Answers
LorenzoLee
07/25/25 5:19pm
Mercedes-Benz reversing camera malfunction may be due to a failure in the display screen, such as wiring issues, camera failure, or loose connectors in the reversing camera system. Reversing camera malfunctions often occur in vehicles where the system was installed aftermarket, primarily due to product quality or installation issues. Reasons for the reversing camera not displaying: 1. Display settings issue—there is usually a camera switch control in the display settings, which should be set to "ON"; 2. Camera failure—replace the reversing camera; 3. Wiring issues—the wiring harness for the reversing camera runs from the dashboard to the trunk, covering a long distance, and it is likely that a section of the wiring harness or connector is not making proper contact, requiring careful inspection. The dimensions of the Mercedes-Benz C-Class are 4784mm in length, 1810mm in width, and 1457mm in height, with a wheelbase of 2920mm.
Was this review help?
18
2
Share
More Forum Discussions

Which is better, the Middle East version or the China-specific version of the Prado?

In terms of configuration and cost-effectiveness, the Middle East version offers higher value for money with richer configurations and more optional features, while the China-specific version currently does not support optional configurations. Overall, the Middle East version is recommended. Below are the specific differences between the China-specific version and the Middle East version: 1. Different engines: The Middle East version offers three engine options, namely a 2.7L engine, a 4.0L engine, and a 2.8L diesel engine; the domestic version only has a 3.5L engine. 2. Different four-wheel drive systems: The Middle East version is equipped with a full-time four-wheel drive system and a central differential lock; the domestic version has a part-time four-wheel drive system. 3. Different appearances: The China-specific version does not have a front chrome bumper guard, while the Middle East version adds a chrome bumper guard to the front.
18
4
Share

What is the tire pressure for 7.00-16 tires?

700r16 steel-belted tires generally require slightly higher pressure than nylon tires. Typically, the front tires should be inflated to 7 bar, while the rear tires should be at 8 bar. Below are key points about vehicle tire pressure: 1. Service life: Both overinflation and underinflation will shorten tire lifespan. Underinflation increases tire deformation and contact area, leading to sidewall cracks, excessive heat generation, rubber degradation, and accelerated shoulder wear. 2. Increased load: Overinflation causes excessive stretching of tire cords, reduces elasticity, and increases the load burden during driving. 3. Follow manufacturer recommendations: Always use the vehicle manufacturer's recommended tire pressure values. These recommendations can typically be found in: the vehicle owner's manual, the label near the driver's door (B-pillar), the drawer beside the driver's seat, or the fuel tank door.
1
1
Share

What gear should an automatic transmission car use when climbing a steep slope?

An automatic transmission car should use the L gear, S gear, or M gear when climbing a steep slope. An automatic transmission car uses a computer to control hydraulic oil to push pistons for gear shifting based on throttle size, vehicle speed, and throttle opening. It automatically selects the appropriate gear according to driving speed and traffic conditions, allowing it to independently control the gear to better match the engine speed with the gear. The gears of an automatic transmission are as follows: P gear is the parking gear and also the starting gear; R gear is the reverse gear; N gear is the neutral gear; D gear is the drive gear, also known as the forward gear; S gear is the sport mode; L gear is the low-speed gear, which uses an automatic transmission and planetary gear mechanisms for shifting, automatically adjusting gears based on the degree of throttle pedal and changes in vehicle speed.
1
1
Share

Can I bring a backpack during the driving test (Subject 3)?

During the Subject 3 driving test, you can bring a backpack but it must be placed on the rear seat. Additional information: 1. The road driving skills test (Subject 3) generally includes: pre-driving preparations, lighting simulation test, starting, straight-line driving, gear shifting operations, lane changing, pulling over, going straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. 2. The safe and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
6
0
Share

Where is the engine number of zg24?

zg24 engine number is usually on the nameplate, which is generally located in the engine compartment or on the side of the co-pilot door, usually a combination of 7 to 8 digits and English letters. In addition to the above method, the engine number can also be viewed in the following 4 ways: The vehicle driving license has the engine number printed on it, usually located on the second last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It should be noted that the engine number is not equal to the engine model. The engine model refers to the specification and size of the engine in the manufacturer, and the engine model can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine number is different.
17
1
Share

What is the difference between Model 3 and Model Y?

Model 3 is a sedan while Model Y is an SUV. Below is a comparison of these two vehicles. 1. Dimensions: The Model 3 measures 4694mm in length, 1850mm in width, and 1443mm in height, with a wheelbase of 2875mm; the Model Y measures 4750mm in length, 1921mm in width, and 1624mm in height, with a wheelbase of 2890mm. The Model Y is significantly larger than the Model 3, offering greater space advantages. 2. Power: The Model 3 has a total motor power of 202kW and a total torque of 404N·m; the Model Y has total motor powers of 317kW and 339kW, with total torques of 545N·m and 623N·m.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.