What Causes the Malfunction of Buick LaCrosse Center Console Buttons?

1 Answers
KaydenLee
07/30/25 7:13am
Buick LaCrosse center console button malfunctions are mostly caused by poor line contact. Additional information: 1. Troubleshooting: Check whether there is power in the live wire entering the ignition switch. If there is, the part before the ignition switch is normal. If there isn't, there is a fault before the ignition switch; Check whether each connector of the wire is loose, falling off, corroded, or poorly connected; Insert the key and turn it to the ignition position without moving it. Check whether there is power in the live wire of the starter motor magnetic pack. If there isn't, the ignition switch is faulty. If there is, continue to check whether the magnetic pack is faulty; Check whether the magnetic pack coil is open, whether the wire and connector are loose, corroded, or poorly connected, etc. 2. Solutions: Remove the conductive rubber circuit board behind the center console buttons for replacement; Seek professional technicians for repair.
Was this review help?
4
2
Share
More Forum Discussions

Where is the automatic folding switch for the rearview mirror on the Geely Vision?

The automatic folding switch for the rearview mirror on the Geely Vision is located on the driver's side door. Here is some information about the rearview mirror on the Geely Vision: 1. The rearview mirror features folding and angle adjustment functions, making it convenient for driving through narrow alleys and parking. 2. First, set the ignition switch to the ACC or ON position. Turn the exterior rearview mirror adjustment switch to L (left) or R (right) to select the corresponding driver's side or passenger's side mirror. Push the exterior rearview mirror adjustment switch left, right, forward, or backward to adjust the mirror. After adjustment, turn the left and right exterior rearview mirror adjustment switches to the 0 position. 3. Different models may have varying styles of electric rearview mirror adjustments, but the functions remain the same. Press the automatic folding button for the rearview mirror or rotate the button to the automatic folding position, and both exterior rearview mirrors will fold simultaneously. Generally, the automatically folded rearview mirrors will unfold automatically the next time the vehicle is started.
14
3
Share

How to Open the Hood of the New Sagitar?

New Sagitar hood opening method is as follows: 1. Open the car door, locate the engine switch handle on the left side of the driver's seat, pull the car engine handle by hand, and you will hear a sound indicating it is unlocked. 2. Walk to the front of the car, reach into the gap of the front cover, pull the safety latch, and you can open the car hood. The functions of the New Sagitar hood: 1. Protect the engine and surrounding pipeline accessories: By improving the strength and structure of the hood, it can fully protect the normal operation of the vehicle. 2. Prevent accidents: The engine operates in a high-temperature, high-pressure, and flammable environment. There is a risk of explosion, combustion, or leakage due to overheating or accidental damage of components. The hood can effectively block injuries caused by explosions and act as a protective shield.
1
3
Share

Is the Audi Q5L equipped with part-time four-wheel drive or full-time four-wheel drive?

The Audi Q5L is equipped with a part-time four-wheel drive system and utilizes a multi-plate clutch-type central differential. Below are some details about the Audi Q5L: 1. Powertrain: The Audi Q5L is a mid-size SUV, powered by two versions of engines—a low-power 2.0-liter turbocharged engine and a high-power 2.0-liter turbocharged engine. Both engines are paired with a 7-speed dual-clutch transmission. 2. Suspension: The front suspension of the Audi Q5L features a five-link independent suspension, and the rear suspension also uses a five-link independent suspension.
8
5
Share

What is the working principle of an automotive relay?

The working principle of an automotive relay is that after the coil is energized, it generates a magnetic field, which then attracts the iron piece connected to the contact, thereby completing the circuit and achieving the purpose of protecting the circuit. The following is an introduction to relays: 1. The general connection method is that the two wires of the coil are one positive and one negative, with one end connected to the switch. The other wires are connected to the electrical appliance. 2. An automotive relay can be seen as an assembly composed of two parts: the control circuit where the coil operates and the main circuit where the contacts work. 3. In the control circuit of the relay, there is only a small operating current. This is because the contact capacity of the operating switch is small and cannot be used to directly control loads with high power consumption. The on/off can only be controlled through the contacts of the relay. 4. The relay is both a control switch and the controlled object (actuator).
7
2
Share

What does 95V on a car tire mean?

95V on a car tire refers to the load index and speed rating. More information about the load index and speed rating is as follows: 1. V indicates that the maximum applicable speed of the tire is 240 km/h, and 95V means that the single tire load capacity is 690 kilograms. 2. The load index is molded on the sidewall of the tire, indicating the maximum load limit of the tire. For driving safety, this load should not be exceeded. 3. The speed rating indicates the maximum speed at which the tire can carry a specified load under defined conditions. Every tire has a designed critical speed. When driving at high speeds reaches this speed, the tire will exhibit a "standing wave" phenomenon. If driving continues under these conditions, there is a risk of tire blowout.
1
2
Share

How to Deal with a Locked Steering Wheel in a Buick Car?

Buick car steering wheel lock handling method is: step on the brake, hold the steering wheel with your left hand, gently shake it, and simultaneously turn the key with your right hand to unlock it. When you are not familiar with it, the first attempt may not succeed in unlocking. Don't worry in this case; just pull out the key and repeat the above steps a few times. The following is an introduction to the locked steering wheel in a Buick car: 1. The reason for the steering wheel lock is a very basic anti-theft feature of the car. The principle is that through the rotation of the key, a steel pin is controlled by a spring. When the key is pulled out, if the steering wheel is turned, the steel pin will pop into a pre-drilled hole and then lock the steering wheel to ensure it cannot be turned manually. 2. When the steering wheel is locked, it cannot be turned, the key cannot be turned either, and the car cannot be started, thus achieving anti-theft. Steering wheel lock often occurs with novice car owners because after parking and turning off the engine, they find the steering wheel is not straightened and then habitually turn it back by hand, which immediately triggers the anti-theft function. Therefore, after turning off the engine, try not to touch the steering wheel again. Even if you need to straighten the steering wheel, you should start the engine to do so.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.