What Causes the Maintenance Light to Illuminate in a Santana?

2 Answers
DeEdward
08/27/25 4:52am
Car maintenance light serves as a reminder for the owner that the vehicle requires servicing. The wrench symbol, known as the maintenance light, is a feature set by manufacturers to alert owners based on predetermined mileage or time intervals. It appears in the form of dashboard indicators, screen messages, or warning lights to notify owners when maintenance is due. Below is some information about the Volkswagen Santana: Exterior: The new Santana measures 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm. Performance: The entire lineup is equipped with a 1.5L naturally aspirated engine, coded as EA211-DLF, delivering a maximum power output of 82kW and a peak torque of 145Nm. The platform has also been upgraded to the PQ25 extended version, shared with the overseas Polo sedan and the new Jetta, featuring a 2603mm wheelbase, positioning it within the compact sedan category.
Was this review help?
5
4
Share
Shane
09/09/25 3:53am
The Santana's maintenance light illuminates primarily due to the operation of the vehicle's built-in maintenance reminder system, which automatically triggers based on preset mileage or time intervals, such as every 5,000 kilometers or six months. This indicates the need for basic maintenance like oil changes and filter inspections. I've encountered many car owners who ignore this light. While the vehicle may continue to run for a short period, prolonged neglect can lead to accelerated engine wear due to degraded oil, increased fuel consumption, or even malfunctions. Another common cause is the improper reset of the system by the mechanic after the last service or abnormal sensor signals. In such cases, you can attempt to reset it yourself: turn off the engine, insert the key without starting the car, press and hold the button on the dashboard for a few seconds, and check if the light goes off. If it persists, a visit to the workshop for a diagnostic computer check is necessary to rule out electrical issues. Regularly responding to the maintenance light helps prolong the vehicle's lifespan and maintain its performance.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What are the differences between sedan and SUV models?

The differences between sedan and SUV models include safety, comfort, and stability. Here are the specific details: Safety: Vehicles traveling on highways are generally faster, making visibility crucial. Due to their higher ground clearance and open design, SUVs offer a better field of vision compared to sedans. This allows SUV drivers to assess road conditions earlier, potentially making them slightly safer than sedans in this aspect. Comfort: Sedans typically have longer seats than SUVs, and their design is more ergonomic, allowing passengers to relax comfortably against the backrest. Therefore, SUVs may not match the comfort level of sedans. Stability: On highways, vehicles maintain high speeds. However, SUVs have a higher center of gravity due to their elevated chassis, which can cause a feeling of instability or 'floating' at high speeds. Thus, sedans generally offer better stability than SUVs.
18
3
Share

What does the ECO button in a car mean?

ECO is the switch for the car's economical driving mode. ECO is an English abbreviation formed by the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active eco driving mode and non-active eco driving mode. When the eco indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. Eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to enable it. When the driver presses the Eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active Eco mode does not have a dedicated button. When the dashboard eco indicator light illuminates, it serves merely as a reminder function. The Eco system automatically evaluates your driving behavior; if your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most cars adopt the active Eco driving mode, meaning they have their own switch button. Therefore, during daily driving, we can enable the Eco mode. However, it is unnecessary to activate Eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not reflect the fuel-saving characteristics of Eco mode and could instead impact the vehicle's power performance. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the Eco mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not function in such scenarios.
5
5
Share

What are the hidden features of the GAC Aion S?

The following are the hidden features of the GAC Aion S: 1. ECO+ Mode: This mode is theoretically the most energy-efficient way of driving. Since this mode is not set for daily use, its activation is hidden in the vehicle settings of the driving computer, rather than in the driving mode options behind the gear lever. In this mode, the speed is limited to a lower range, while the I-pedal mode is automatically activated, and energy recovery reaches the highest level. In this mode, the battery's power is fully released, unlike in the normal mode where a certain amount of power is reserved to protect the battery. 2. CREEP Function in I-pedal Mode: In I-pedal mode, when the pedal is completely released, the motor's recovery capability reaches its maximum until the vehicle comes to a complete stop. In congested traffic, frequent pressing and releasing of the pedal can lead to fatigue. However, the Aion S adds a CREEP function in this mode, where the vehicle does not come to a complete stop even when the pedal is fully released, instead moving at a very low speed.
2
3
Share

What are the differences between the BJ40L and BJ40C?

bj40c is a single-row seat model, while bj40l is a double-row seat model, which is the fundamental difference between them. The following are the detailed differences between the two models: 1. Three-door and five-door: bj40c has three doors, while bj40l has five doors. 2. Performance: bj40c features superior ground clearance, approach angle, and departure angle, equipped with a 2.4L engine that delivers good low-end torque. Its 4L low-speed four-wheel-drive mode can handle almost all off-road conditions. It is also equipped with a series of safety systems such as Vehicle Stability Control, Brake Assist, and Hill Start Assist, significantly enhancing its safety performance in off-road conditions compared to the BG40L model. 3. Exterior: The exterior configurations of both models are largely consistent, both featuring off-road style equipment like engine decorative covers and removable hardtops to enhance the overall visual effect. BG40c adds a headlight delay-off function, improving the practicality of lighting after parking at night.
17
0
Share

What does the new four modernizations of sedans refer to?

Automotive new four modernizations refer to electrification, connectivity, intelligence, and sharing. Electrification pertains to the field of new energy power systems; intelligence refers to autonomous driving or driver assistance subsystems; connectivity involves the layout of the Internet of Vehicles; sharing denotes car sharing and mobility services. Among these four modernizations, electrification serves as the foundation, while connectivity acts as the link to achieve big data collection, gradually leading to intelligent mobility. This may become a feasible pathway for automobiles to achieve the ultimate goal of autonomous driving. As the wave of "new four modernizations" sweeps across the automotive industry, Chinese consumers have responded the fastest. This characteristic manifests in the consumer market, where China's auto market has become the most active "testing ground" today. Internet-connected cars, new energy vehicles, and continuously emerging new technologies and concepts stimulate the purchasing desires of young Chinese consumers and encourage automakers to boldly package vehicle models with new technologies and concepts for the market. With the penetration of "Internet+" in various fields, the new four modernizations will have a significant impact on future mobility, meaning that cars will no longer be just cars. Analyzing from both technological and value chain dimensions, the most disruptive future development trends in the automotive industry can be summarized as the "new four modernizations," where electrification is the foundation, connectivity is the condition, intelligence is the key, and sharing is the trend.
11
5
Share

Can You Drive on the Road with the Front License Plate Missing but the Rear One Still Intact?

You cannot drive on the road if the front license plate is missing. Article 95 of the Road Traffic Safety Law states: If a motor vehicle driven on the road does not display a motor vehicle license plate, does not carry an inspection compliance mark or an insurance mark, or does not have the vehicle registration certificate or driver's license on board, the traffic management department of the public security organ shall detain the motor vehicle, notify the party to provide the corresponding license plates, marks, or complete the necessary procedures, and may impose penalties in accordance with the provisions of Article 90 of this Law. If a motor vehicle driven on the road does not display a motor vehicle license plate, does not carry an inspection compliance mark or an insurance mark, or does not have the vehicle registration certificate or driver's license on board, the traffic management department of the public security organ shall detain the motor vehicle, notify the party to provide the corresponding license plates, marks, or complete the necessary procedures. Regulations on motor vehicle license plate display: When driving a motor vehicle on the road, the motor vehicle license plate must be displayed, along with the inspection compliance mark and insurance mark, and the vehicle registration certificate must be carried on board. The motor vehicle license plate must be displayed clearly and completely as required, and must not be intentionally obscured or damaged. No unit or individual may confiscate or detain a motor vehicle license plate. Procedure for replacing a license plate: Report the loss of the license plate at the local police station where the plate was lost to obtain a certificate of loss. Prepare the required materials, fill out the corresponding forms at the vehicle management office, and provide the original and copy of the vehicle owner's identity proof. If an agent is involved, the agent must also submit their original and copy of identity proof and a written authorization from the vehicle owner. The applicant should take the Motor Vehicle License Plate Application Form, identity proof, and other required documents to the service window at the vehicle management office for processing. The non-lost license plate will be retrieved, and the applicant will receive an acceptance receipt and pay the fee. The applicant can then collect a temporary license plate with the acceptance receipt and payment receipt, which should be prominently displayed on the front of the vehicle. After ten working days, the applicant can take the temporary license plate to the designated location to collect the new license plate and have it installed.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.