What Causes the Low RPM Shaking in Bora?

1 Answers
VanDelilah
07/29/25 10:48pm
Bora low RPM shaking is caused by a dirty air filter. When idling, the vehicle body shakes noticeably: Observing the exhaust pipe outlet, the exhaust gas flow shows obvious gaps, and the exhaust pipe shakes severely with clearly audible "popping" or thumping sounds. At low RPMs around 2000, the vehicle body exhibits significant shaking: Weak acceleration occurs, and the shaking sensation actually decreases at higher RPMs. This phenomenon is mostly related to the ignition coil. The engine shows obvious shaking: Opening the engine hood and observing the running engine reveals that the engine has apparent shaking.
Was this review help?
19
1
Share
More Forum Discussions

How to Repair a Broken Rearview Mirror Pivot?

Repair methods for a broken rearview mirror pivot include: 1. Using specialized high-strength double-sided adhesive tape designed for rearview mirrors—simply peel off the protective strips on both sides; 2. Applying rearview mirror-specific AB adhesive, which requires mixing before use; 3. Utilizing UV-cured adhesive, which effectively bonds both plastic and metal materials. The rearview mirror is one of the critical safety components on a vehicle, aiding drivers in observing rear road conditions during reversing and monitoring the vehicle's surroundings while driving. Key considerations for adjusting the rearview mirror are: 1. Properly adjust your seating position before aligning the mirror surface; 2. For the left-side rearview mirror, position it vertically so the distant horizon is centered, and horizontally so the vehicle body occupies one-quarter of the mirror's surface area.
9
2
Share

What are the methods to increase the power of the Mazda6?

Methods to increase the power of the Mazda6 are: 1. Open the engine compartment, remove the rusted exhaust manifold, being careful to retain the previous gasket, which is the gasket between the exhaust manifold and the engine; 2. Replace it with a stainless steel exhaust manifold, install the turbo and header on the dedicated exhaust manifold, then prepare to install the intercooler piping and oil cooler piping. After installation, perform some professional adjustments. Taking the 2006 Mazda6 2.0L manual model as an example: it is a mid-size 4-door 5-seater sedan with a length, width, and height of 4670mm, 1780mm, and 1435mm respectively, a wheelbase of 2675mm, equipped with a 6-speed manual transmission, and a top speed of 211 kilometers per hour.
6
3
Share

How to Remove Rust Spots from White Car Paint?

White car paint rust spots can be removed by the following methods: 1. Clay bar: Most rust spots exist on the surface of the paint. A clay bar can be used to scrub them away. The clay bar is effective in removing stubborn stains from the car body. For white car paint rust spots, first wet the car body, then use the softened clay bar to evenly grind and wipe the rust spots, keeping the body moist; 2. Polishing; 3. Iron remover: Pour it onto the rust spots and wipe with a sponge, then rinse with clean water. Car owners should regularly maintain their vehicles, wash them promptly when dirty, and pay attention to paint care. Waxing, sealing, coating, and ceramic coating can all protect the car paint to a certain extent. Most rust spots on the car body are caused by acidic substances in rainwater carrying iron powder from the air, so it is important to wash the car body promptly after rain.
9
5
Share

How Often Should Air Compressor Oil Be Changed?

There are three scenarios for the replacement cycle of air compressor oil: 1. Mineral oil should be changed every 3 to 4 months; 2. Semi-synthetic oil should be changed every 6 to 8 months; 3. Full synthetic oil should be changed every 10 to 11 months. The oil should be changed in advance if the air compressor exhibits the following conditions: 1. The air in the location where the air compressor is placed contains many impurities; 2. The air contains corrosive substances; 3. The ambient temperature of the compressor room is high; 4. The air contains a large amount of dust. Oil is a substance enhanced with additives in base oil, mainly containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers.
18
0
Share

Where is the transmission oil dipstick on the Santana?

The Santana does not have a transmission oil dipstick. When adding oil, unscrew the transmission oil filler plug, then unscrew the transmission drain plug to completely drain the oil from the transmission. Tighten the transmission drain plug, pour the oil into the oil press, connect the oil press hose to the filler port, and finally pump the oil press to allow the oil to flow into the transmission until it reaches the level just below the filler port. The Santana is a brand of cars produced by Volkswagen in California, USA. Its models include the Santana 87, Santana 2000, New Santana, Santana 3000, and Santana Vista Zhijun.
11
5
Share

What engine does the Golf R have?

Golf R is equipped with a 2.0-liter turbocharged engine, with a maximum power of 188 kW and a maximum torque of 330 Nm. The maximum power speed is 6000 rpm, and the maximum torque speed ranges from 2400 to 5200 rpm. It features direct fuel injection technology, uses an aluminum cylinder head and cast iron cylinder block, and is paired with a 6-speed dual-clutch transmission. The Golf R is a compact car under FAW-Volkswagen, with body dimensions of 4263mm in length, 1799mm in width, and 1460mm in height, and a wheelbase of 2630mm.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.