What causes the low beam lights of Maxus G10 not to work?

What does it mean when the engine light turns yellow?

When the engine light turns yellow, it indicates a fault in the engine. The reasons may include: 1. The gasoline used is of poor quality or there is excessive carbon buildup in the engine, leading to poor combustion conditions, which may trigger the fault light. In such cases, it is important to promptly inspect the engine. 2. A malfunction in the engine's oxygen sensor usually causes the engine fault light to turn yellow. While it may not affect normal driving, it should still be checked promptly. 3. Issues such as clogged fuel injectors or carbon buildup in the intake valves can also trigger the fault light. These problems are often related to the quality of the fuel used or dust entering during car maintenance. Fuel quality is a primary factor causing the engine fault light to illuminate. For example, 97-octane gasoline should have an octane rating of no less than 97. Leaded gasoline can cause lead poisoning in the oxygen sensor, making fuel quality a major reason for insufficient engine combustion, which in turn triggers the engine fault light.

17

1

Share

What are the differences between the Mercedes-Benz 4x4 and the regular G?

Differences between the Mercedes-Benz 4x4 and the regular G: 1. Different engines: The 4x4 features a 4.0-liter V8 engine; the regular G has two turbochargers with InsideV structure. 2. Different cylinders: The 4x4 has a twin-scroll turbocharger; the regular G uses alloy for the cylinder head. 3. Different suspensions: The 4x4 operates via button presses or selecting the corresponding transmission mode; the regular G comes with a 9-speed automatic transmission (1 reverse gear). The Mercedes-Benz G500 is equipped with a 4.0L twin-turbocharged V8 engine, paired with a 7-speed automatic transmission, delivering a maximum horsepower of 422 HP and a maximum torque of 610 NM. The vehicle dimensions are 7644mm in length, 1867mm in width, and 1954mm in height, with a wheelbase of 2850mm, a minimum ground clearance of 205mm, and a fuel tank capacity of 96L.

2

3

Share

What is the tire size of the Nissan Qashqai?

The tire sizes of the Nissan Qashqai vary by model, including 215/60R17, 215/55R18, and 225/45R19, with a non-full-size spare tire provided. Precautions for changing car tires: 1. It is recommended to use original equipment manufacturer (OEM) tires for replacement, as their quality is relatively guaranteed; 2. When modifying tire sizes, it is necessary to register the changes with the vehicle management office, otherwise it will be considered illegal; 3. Different types of tires should not be mixed. The Nissan Qashqai is a compact SUV produced by Dongfeng Nissan, with a body length of 4401mm, width of 1837mm, and height of 1611mm. The vehicle is powered by a 1.2-liter turbocharged engine and a 2.0-liter naturally aspirated engine. The 1.2-liter turbocharged engine delivers a maximum horsepower of 117ps and a maximum power of 86kw, while the 2.0-liter naturally aspirated engine offers a maximum horsepower of 150ps and a maximum power of 110kw.

17

4

Share

What is the comparison between the front faces of Mercedes-Benz E and S?

Comparison between the front faces of the Mercedes-Benz E-Class and the S-Class: 1. Number of LED light strips: The headlights of the E-Class have two LED light strips; the headlights of the S-Class have three LED light strips. 2. Size of the front grille: The E-Class has a smaller front grille; the S-Class has a larger front grille. The Mercedes-Benz E-Class is a mid-size luxury sedan produced by Mercedes-Benz, available in both Beijing Mercedes-Benz long-wheelbase version and imported Mercedes-Benz standard-wheelbase version. In terms of powertrain, the E-Class offers a 1.5L hybrid system, a 2.0L turbocharged engine, and a 2.0L hybrid system; for transmission, the E-Class is equipped with a 9-speed automatic transmission across all models. The Mercedes-Benz S-Class is a full-size SUV produced by Mercedes-Benz. In terms of powertrain, the S-Class offers a 2.0L turbocharged engine, a 3.0L twin-turbocharged engine, and a 2.0L hybrid system; for transmission, the S-Class is equipped with a 9-speed automatic transmission across all models.

11

5

Share

Why Does the Vehicle Make Abnormal Noises?

Here is an introduction to the "zi zi" abnormal noise during vehicle driving: When a vehicle makes a "zi zi" noise, it is possible that there is a problem with the brake pads. The brake pads may have worn thin, causing direct contact between the brake drum and the vehicle, resulting in metal friction. In this case, the brake pads need to be replaced. Additional information on when to replace brake pads: 1. Front brake pads generally need to be replaced every 30,000 to 50,000 kilometers. 2. Rear brake pads can be replaced after driving approximately 60,000 to 100,000 kilometers. 3. New brake pads are typically about 1.5 centimeters thick, and there is a protrusion at both ends of the brake pads, approximately 3 millimeters. If the thickness of the brake pads is level with this mark, they should be replaced immediately. 4. If a metal friction sound is heard during braking, it may indicate that the brake pads have worn down to the protrusion position, causing friction with the brake disc and producing abnormal noise. Immediate replacement is necessary. 5. If the brake pedal feels lighter than usual or if braking feels difficult or ineffective, it also indicates severe wear and insufficient thickness of the brake pads, requiring prompt replacement.

8

1

Share

Should a new car be driven at high speeds after purchase?

It is recommended to drive a new car at high speeds after the first maintenance. Driving at high speeds can help remove carbon deposits from the engine, and gradually increasing the speed is beneficial for the engine. However, suddenly increasing the speed should be avoided as it may cause the new car to malfunction and damage the engine. Relevant information is as follows: 1. It is not advisable to drive at high speeds before the first maintenance: It is not recommended to drive at high speeds or "break in" the car before the first maintenance because the new car is still in the break-in period. During this period, the speed should be increased gradually, and sudden increases in speed should be avoided to prevent damage to the engine. 2. The reason for driving a new car at high speeds: The purpose of driving a new car at high speeds is to increase the engine RPM, not just to accelerate by pressing the throttle hard. A new car should not always be driven at low speeds during the break-in period, as this can lead to more carbon deposits in the engine. Whether it is a new or old car, "driving at high speeds" helps reduce carbon deposits in the engine. If it is not possible to drive on highways, driving at high RPMs on regular roads can also effectively reduce carbon deposits.

17

1

Share

What causes the low beam lights of Maxus G10 not to work?

What does it mean when the engine light turns yellow?

What are the differences between the Mercedes-Benz 4x4 and the regular G?

What is the tire size of the Nissan Qashqai?

What is the comparison between the front faces of Mercedes-Benz E and S?

Why Does the Vehicle Make Abnormal Noises?

Should a new car be driven at high speeds after purchase?

Should I Use Hot or Cold Air to Defog the Car?

Does a new car need waxing? How often should it be waxed?

What Causes the Noise When Turning the Steering Wheel to Full Lock?

Where is the air filter for the Tiguan L located?