What Causes the Loud Fan Noise in the Avalon?

What to Do When Wipers Fail to Clear Rainwater During Heavy Rain Driving?

When heavy rain or stormy weather makes it difficult to improve visibility with wipers, immediately reduce speed, choose a safe location to park, turn on the clearance lights and hazard warning flashers, and wait until the rain lessens or stops before continuing to drive. Below are solutions for when wipers cannot clear rainwater properly under normal circumstances: 1. Remove both wipers: For most standard wipers, after resetting and turning off the engine, manually lift the wipers while the car is stationary and remove them by reversing their installation direction. This back-and-forth method is both an installation and removal technique. 2. Prepare a piece of water sandpaper: Purchase water sandpaper and tear it into small pieces, using one piece at a time. 3. Soak the wipers and water sandpaper in clean water: Use an appropriate container to hold water and soak both the wipers and water sandpaper thoroughly.

20

3

Share

What is the average fuel consumption of the Kia K5?

The Kia K5 has the following two types of fuel consumption: 1. The model equipped with a 2.0-liter naturally aspirated engine has a fuel consumption of 7.7 liters per 100 kilometers. 2. The model equipped with a 1.6-liter turbocharged engine has a fuel consumption of 7.5 liters per 100 kilometers. Here is some related information about the Kia K5's fuel consumption: Fuel consumption is related to multiple factors, mainly including the following: 1. Damage to the vehicle's oxygen sensor. 2. The "three filters" have not been replaced for a long time. 3. Abnormal tire pressure or switching to larger-sized tires. 4. Long periods of idling without turning off the engine or frequent ignition. 5. Unnecessary increase in vehicle load. 6. Driving with all windows open in summer or using the air conditioning during traffic jams.

19

3

Share

What to Do When the Seat Belt Alarm Keeps Beeping?

Reasons and solutions for the continuous seat belt alarm: 1. The seat belt is not fully inserted: Unfasten the seat belt and reinsert it. 2. Damaged seat belt buckle: A damaged buckle may prevent the seat belt from being properly inserted. Listen for the clicking sound when inserting the seat belt. If the buckle is damaged, replace it. 3. Disrupted signals from the vehicle's computer: Turn off the engine and restart the vehicle. 4. Faulty seat belt sensor: The sensor is usually located under or inside the seat. Check it. If the seat belt sensor is faulty, it's best to visit a 4S shop for inspection and repair. 5. Poor wiring connection: Check if the corresponding wiring for the seat belt is loose and reconnect it securely.

1

Share

Should the front windshield film be green or blue?

Both are acceptable. For the front windshield film, it is recommended to choose lighter colors such as green, sky blue, gray, brown, or natural tones, as these are more comfortable for the eyes. High-quality films are typically light in color yet provide excellent heat insulation. Below are some relevant guidelines: 1. Color selection: When applying film, opt for a slightly lighter shade or a colorless film for the front windshield to ensure it does not obstruct the driver's view. The film for the four side windows should not be too dark, as this could impair the driver's judgment of the surroundings at night. For the driver and front passenger windows, it is advisable to leave a triangular area near the rearview mirror to enhance visibility and prevent safety hazards caused by obstructed views of vehicles behind. 2. Professional installation: Always have the film applied at a reputable and professional auto detailing shop to avoid quality issues and unnecessary complications due to poor installation techniques. When selecting solar film, prioritize high-quality options with high light transmittance to ensure safer nighttime driving. During installation, it is best to have the car indoors to prevent impurities from getting between the glass and the film, which could affect the application process.

8

3

Share

Internal or External Tire Pressure Monitoring: Which is Better?

Tire pressure monitoring systems, whether internal or external, each have their own advantages and disadvantages. The choice can be made based on the specific needs of your vehicle. Advantages and disadvantages of internal tire pressure monitoring devices: Advantages: Installed inside the tire, they use a sensor-equipped valve stem to replace the original one. The exposed part is minimal and does not protrude outside the wheel hub. Once installed, they are essentially maintenance-free (lasting over 5 years without issues). Disadvantages: Installation is complex and requires wheel balancing. Advantages and disadvantages of external tire pressure monitoring devices: Advantages: Easy installation. No need to replace the valve stem or perform wheel balancing, and they don't even require inflating or deflating the tire. All the owner might need to do is screw the sensor onto the valve stem. Disadvantages: Not suitable for SUV models with higher tire pressure. Inflating or deflating requires removing and reinstalling the sensor. External sensors are more susceptible to damage from foreign objects. How tire pressure monitoring works: Pressure sensors installed inside the tire measure the tire's air pressure, and a wireless transmitter sends this pressure information from inside the tire to a central receiver module. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle body vibration, indirectly affecting the lifespan of other components; Overextends the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks or blowouts, leading to tire failure.

9

5

Share

Why can't front fog lights and rear fog lights be turned on simultaneously?

Front fog lights and rear fog lights can be turned on simultaneously. After turning on the parking light switch and the parking lights are illuminated, then turn on the fog light switch. Some vehicles have an ON position marked, and for rear fog lights, some require the front fog lights to be turned on first before operating the switch, while others do not. This depends on the specific vehicle model. Although they are controlled separately, the rear fog lights can be turned on together with the front fog lights. If you want both front and rear fog lights to be on simultaneously, simply turn the light switch to the rear fog light position. More details are as follows: 1. Front fog lights are positioned lower and have non-directional light sources. When driving on uneven roads at night, neither high beams nor low beams can clearly illuminate the road ahead. In such cases, turning on the front fog lights is a good option. 2. Fog lights have strong penetration in foggy conditions, making it easier for other vehicles or pedestrians to notice them early in low-visibility weather, thereby effectively preventing accidents. 3. Fog lights can significantly interfere with the vision of other drivers, so it is advisable to avoid using them during normal driving to prevent inconvenience to other road users.

11

4

Share

What Causes the Loud Fan Noise in the Avalon?

What to Do When Wipers Fail to Clear Rainwater During Heavy Rain Driving?

What is the average fuel consumption of the Kia K5?

What to Do When the Seat Belt Alarm Keeps Beeping?

Should the front windshield film be green or blue?

Internal or External Tire Pressure Monitoring: Which is Better?

Why can't front fog lights and rear fog lights be turned on simultaneously?

What does the ECO indicator on the vehicle mean?

How to Check the Tire Pressure Monitoring on the Tiguan L 330 2WD Luxury Version?

What are the reasons why the driver's door is unlocked but cannot be opened?

Is the one-button start a single press or a long press?