···
Log in / Register

What Causes the Loud Engine Start Sound in the Tayron 380?

3 Answers
McGage
08/31/25 3:53am
The loud engine start sound in the Tayron 380 is most likely due to carbon buildup in the engine. Carbon Buildup: During operation, the engine is highly prone to carbon buildup, which is an unavoidable phenomenon. Therefore, it is necessary to regularly clean the engine carbon deposits to ensure normal engine operation. Poor Sound Insulation: If the engine sound appears normal outside the vehicle but seems louder when sitting inside, this is due to poor sound insulation in the vehicle. It is advisable to check the car's sealing strips to see if they have aged.
Was this review help?
12
4
Share
VonCharlie
09/12/25 7:17am
With years of experience in car repair, the most common reason for the loud startup noise in the Tayron 380 is a loose or worn drive belt. A squealing sound during startup usually indicates belt slippage, while a rattling noise may suggest aging bearings in the starter motor. Sometimes, a stretched timing chain can produce a metallic knocking sound during cold starts. In winter, cold starts with high oil viscosity can also increase noise due to greater resistance from thicker oil. It's advisable to regularly check the belt tension and adjust it if loose; if the starter motor shows normal voltage but excessive noise, it should be replaced. The timing chain should be inspected for stretch every 80,000 kilometers and replaced if necessary to prevent damage. Additionally, cleaning the air filter can reduce startup load. Ignoring these minor issues may lead to bigger problems, such as timing misalignment damaging the engine, so early maintenance is the most hassle-free approach.
Was this review help?
13
3
Share
Expand All
MacSteven
10/26/25 8:06am
I drive a Tiguan 380 and have encountered loud startup noises. After inspection, I found that the engine oil viscosity was too high, especially in winter when thicker oil made starting difficult and noisy. Switching to 5W-30 significantly quieted it down. Worn spark plugs can also cause uneven ignition and noise, so I replace them every 40,000 kilometers as a preventive measure. A clogged or carbon-fouled catalytic converter can lead to unstable startups and harsh noises, which regular cleaning can alleviate. An aging battery with weak discharge makes the starter struggle, but replacing the battery solved the issue. These minor maintenance tasks aren’t expensive but ensure smooth startups, saving both money and hassle. Preventive maintenance includes checking oil, filters, and battery terminals every six months to avoid small issues turning into major problems that disrupt daily driving.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

What Causes Severe Engine Vibration After Overhaul?

Severe engine vibration after an overhaul is mostly caused by poor performance of the ignition system or electronic fuel injection system. Spark Plug Issues: If the spark plugs in the car's ignition system malfunction, it can lead to poor ignition system performance, weak spark plug firing, and other problems, resulting in unstable engine operation at idle. Check the condition of the spark plugs, high-voltage wires, and ignition coils for excessive carbon buildup on the spark plugs. If found, clean or replace the spark plugs immediately. Fuel Quality Issues: Most car owners experiencing unstable issues like "idle vibration" have problems closely related to fuel quality. Poor fuel quality can damage engine performance, leading to idle vibration. Clean the car's "throttle body" promptly.
9
0
Share

What are the reasons for no response when starting the Maxus V80?

Maxus V80 not responding when starting may have the following reasons: Possible starter motor damage: If there is no movement at all when turning the key, it indicates starter motor damage, which requires re-hanging and pushing. It could also be an issue with the fuel pump, please inspect carefully. Poor or incorrect wiring connections: Poor grounding of the battery; damaged distributor or Hall sensor; damaged ignition switch or poor wiring connections; damaged transistor ignition control unit or poor wiring connections. Most diagnostic methods for low-voltage circuit faults involve using an ammeter or voltmeter to check each wire sequentially to eliminate the fault point. Severe throttle carbon buildup: Leading to insufficient throttle opening, preventing the combustible mixture from entering the cylinder for combustion, resulting in failure to start.
12
1
Share

How Many Years Does the Battery of Volkswagen Tiguan L Typically Last?

Volkswagen Tiguan L car batteries generally last more than three years. Batteries can be divided into traditional lead-acid batteries and maintenance-free batteries. Battery Working Principle: Car batteries, also known as storage batteries, are a type of battery. Their working principle involves converting chemical energy into electrical energy. The batteries commonly referred to are lead-acid batteries, which are primarily made of lead and its oxides, with sulfuric acid solution as the electrolyte. Battery Maintenance Tips: If the battery is frequently in a state of charging and discharging—such as when using high-power electrical devices, during short-distance driving, or in colder regions—its lifespan may be shortened. If you notice poor power supply, avoid using the car's power sources before starting the engine, such as electric air pumps, audio systems, warning lights, or power windows.
12
4
Share

What Causes the Headlights to Work but the Taillights Not to Light Up?

The headlights working but the taillights not lighting up is generally due to poor contact, a blown fuse, or possibly a burnt-out bulb. It is recommended to visit a repair shop for maintenance. Solutions: Check the fuse to determine if it has blown. If the metal strip inside the taillight fuse is intact, then the issue is not with the fuse. If the metal strip appears broken or looks unusual, the fuse has blown and needs replacement. Use fingers or tweezers to remove the fuse. Taillight Usage Tips: Since the taillight functions are automatically activated along with the headlights, they are particularly clear at night. However, during daytime driving in overcast or dim conditions when headlights are unnecessary, manually turning on the parking lights is essential to ensure visibility for vehicles and pedestrians both in front and behind.
14
4
Share

Will speeding at traffic lights be captured by cameras?

Speeding at traffic lights will be captured by cameras. Speeding less than 10% will not be penalized. Article 86 of the Road Traffic Safety Law: Exceeding the maximum speed limit by less than 50% will result in a fine and 3 demerit points; exceeding the maximum speed limit by more than 50% will result in a fine and 6 demerit points; vehicles exceeding the maximum speed limit by more than 50% on highways will result in a fine and 6 demerit points; all the above penalties will also lead to the revocation of the driver's license. Precautions at traffic lights: Nowadays, electronic eyes at intersections are equipped with functions for capturing traffic violations and speed detection, although some speed detection functions may not be activated. However, generally speaking, electronic eyes with speed detection function take photos from the front of the vehicle, while those at the rear of the vehicle only capture red-light running.
15
1
Share

Is the Road Test or the Closed-Course Test More Difficult?

The road test is more difficult. The only difference is that during the closed-course test, there is no examiner sitting beside you, which reduces nervousness. Therefore, relatively speaking, the road test is harder. Differences between the closed-course test and the road test: The closed-course test is conducted in a standardized testing area with a few routine items, making it simpler and shorter in duration. The road test, on the other hand, takes place on public roads with varying traffic conditions, which tests the driver's skills more thoroughly. The surroundings also change dynamically due to other vehicles and pedestrians. Road test procedure: After the examiner verifies the candidate's information, the candidate boards the vehicle. Upon identity verification, the candidate will hear the announcement, 'Verification passed, the test begins now,' and must exit the vehicle (timing starts here, with a total time limit of 20 minutes). Gently close the car door while facing the vehicle.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.