···
Log in / Register

What Causes the Loud Engine Noise in the Levin Hybrid?

4 Answers
DiAnnie
07/30/25 1:06am
There are many reasons for loud engine noise, such as wear and tear of engine parts, aging of the muffler, poor lubrication system, excessive carbon buildup, etc., all of which can generate noise. By adding vibration damping panels along with sound-absorbing pads, road noise and tire noise from the engine can be effectively reduced. Below are the relevant explanations: 1. Road Noise and Tire Noise: Road noise and tire noise are caused by the friction between the tires and the road surface, leading to vibrations and noise. Therefore, vibration damping is the best solution. Comprehensive application of vibration damping panels or specialized damping panels, sound-absorbing pads, and door sealing strips to the fenders, floor, and doors can improve tire and road noise from three sources: vibration damping, sound absorption, and sound insulation. 2. Wind Noise: Wind noise occurs when the pressure of the wind exceeds the sealing resistance of the doors. Thus, enhancing the sealing resistance is the most direct and fundamental solution. Door sealing strips and inner sealing strips can effectively address this issue.
Was this review help?
7
4
Share
DeClayton
08/15/25 6:36am
I've been driving my Levin Hybrid for a while now, and the loud engine noise is quite annoying. I've summarized a few possible reasons: First, when the hybrid system's battery is low, the engine frequently starts to recharge, and the increased load naturally makes the sound louder. Second, aging or insufficient engine oil can reduce lubrication, leading to increased operational noise. Third, a clogged air filter restricts airflow, forcing the engine to work harder. Additionally, poor sound insulation or an older car may transmit noise more noticeably. I've seen others ignore this issue, resulting in a significant increase in fuel consumption and even excessive engine wear. I recommend starting with a simple check at the dealership or trying a high-quality engine oil change. Using eco mode during daily driving can also reduce the engine's workload. Regular maintenance is key—don't let small issues turn into big problems.
Was this review help?
19
4
Share
Expand All
LaDakota
10/20/25 5:06am
As someone who enjoys delving into cars, I think the loud engine noise of the Leiling Hybrid is worth exploring. The engine in hybrid models isn't always running, so the sudden high load during startup can amplify noise. Additionally, loose drive belts or worn chains can cause unusual sounds, and a stuck cooling system fan can lead to overheating and increased engine noise. Poor battery health can also cause a sudden surge in charging demand, making the engine sound more pronounced. I've personally done DIY checks—using an OBD scanner to read trouble codes can reveal underlying issues. It's also important to monitor aging sound insulation. I recommend changing the oil every six months and keeping the filters clean to effectively reduce noise and prevent related malfunctions.
Was this review help?
15
3
Share
Expand All
OElaina
12/03/25 5:38am
I bought a Levin Hybrid right after getting my license, but the loud engine noise makes me a bit nervous. The mechanic said normal reasons include: the engine sounds louder when starting with insufficient battery charge, it's time for an oil change, or the air filter is too dirty. It could also be noise from a loose fan or belt. I tried opening the hood myself to listen, and the sound originates from the engine compartment. The noise increases during long drives, but switching to eco mode helps alleviate it. Regular maintenance can prevent issues, and fixing minor problems promptly avoids compromising driving safety.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

How much does the Haval Big Dog weigh?

Haval Big Dog's total vehicle weight is 2 tons. Haval Big Dog: The Haval Big Dog is positioned as a compact SUV, with dimensions of 4620mm in length, 1910mm in width, and 1780mm in height, and a wheelbase of 2738mm. In terms of fuel consumption, the Haval Big Dog's declared fuel consumption per 100 kilometers is 6.9L, indicating excellent fuel economy. The official names for the six colors of the Haval Big Dog are: Orange Dog, Red Dog, White Dog, Black Dog, Gray Dog, and Green Dog. Design: The Haval Big Dog's rugged body styling and rich body colors, combined with the retro elements of circular headlights and the fashionable trend of LED integrated high and low beam design, give it a high rate of turning heads, while also meeting the growing needs of the emerging generation of consumers in recent years.
8
4
Share

How Often Should Shock Absorbers Be Replaced?

Shock absorbers should be replaced every 80,000 to 100,000 kilometers. Over time, the vehicle's vibration filtering performance will deteriorate significantly, potentially affecting handling aspects such as braking and cornering. If the daily driving route has poor road conditions, this will accelerate the wear of the shock absorbers, and owners should replace them in advance to avoid driving safety issues. The impact of damaged shock absorbers on the vehicle: 1. If one shock absorber is leaking oil, it will cause the vehicle body to become unbalanced, with one side higher than the other, leading to automatic deviation while driving and exacerbating irregular tire wear; 2. If the shock absorber top rubber ages and falls off, it will cause the shock absorber to collide with other components, resulting in abnormal noises. Most abnormal noises from the chassis are due to this reason; 3. If the shock absorber spring becomes weak and lacks sufficient extension force, the shock absorption and cushioning effects will be greatly reduced, increasing the hydraulic pressure on the shock absorber and leading to oil leakage.
1
4
Share

Is It Normal for the Front Lighting Indicator to Stay On?

It is normal for the front lighting indicator to stay on. The indicator light is connected in parallel across the switch. When the switch is turned on, the lighting is illuminated, and there is no voltage across the switch, so the indicator light turns off. When the switch is turned off, the lighting goes out, and at this time, there is voltage across the switch. One end of the switch is connected to the live wire, while the other end is connected to the neutral wire through the filament of the bulb. Therefore, when the switch is off, there is voltage across it, which is sufficient to make the indicator emit a faint glow. The headlight is an electrical device that converts electrical energy into light energy and projects it onto the road. It consists of a light-emitting bulb, a reflector that focuses and directs the light onto the road, and a lens that produces a reasonable light distribution. Vehicles are equipped with either 2 or 4 headlights at the front, along with 2 additional fog lights for road illumination during rain, snow, or fog.
15
2
Share

Can an automatic transmission car be started in neutral?

An automatic transmission car can be started in neutral. As long as the gear is not left in R (Reverse), it will not harm the transmission. In fact, the P (Park) gear is almost the same as the N (Neutral) gear. If you push further to P gear, the TCU (Transmission Control Unit) will not issue a shift command, which is equivalent to neutral. Therefore, an automatic transmission car can be started when in neutral. Automatic transmission generally refers to the automatic gear-shifting mechanism in cars, where the control system of the automatic transmission selects the appropriate gear based on the engine speed and load during driving, replacing the driver's subjective judgment and gear-shifting operations. A typical automatic transmission car has six gear positions, from top to bottom: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low).
4
0
Share

What is the difference between car primer and topcoat?

The differences between car primer and topcoat are: 1. Different composition: Primer consists of four parts: resin, filler, solvent, and additives; topcoat is composed of three parts: clear coat, color coat, and primer. 2. Different functions: Primer is the first layer of the paint system, used to level the paint surface, support the topcoat, provide fullness, and reduce costs; topcoat is the final coating layer, which increases the thickness of the paint film by adding layers of topcoat or applying thick coats. 3. Different roles: Topcoat has scratch resistance, gloss hardness, transparency feel, aging resistance, and yellowing resistance; primer fills the capillary pores in the steel plate, making it easier to apply paint on the surface, supports the topcoat to ensure it adheres tightly to the car surface, and helps reduce costs and save energy.
3
2
Share

What happens if you forget to shift to P gear when parking with one-button start?

The consequences of forgetting to shift to P gear when parking with one-button start: the vehicle cannot be powered off, the vehicle cannot be turned off via the keyless start system, and the doors cannot be locked. When using the one-button start and stop function, it is essential to ensure that the vehicle is turned off before locking it. The primary step to turn off the vehicle with one-button start is to use the brake pedal to bring the vehicle to a complete stop. Without releasing the pedal, shift the vehicle's gear to P, engage the vehicle's handbrake system, then release the brake pedal and press the one-button start button once to turn off the vehicle. You can check if the dashboard lights are off, as this indicates that the vehicle is turned off.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.