What Causes the Loud Engine Noise in Teana 2.5 During Startup?

1 Answers
DelRichard
07/30/25 4:27am
The loud engine noise in a Teana 2.5 during startup can be attributed to the following reasons: Inadaptability to New Oil Viscosity: After prolonged use, the engine oil becomes thinner and carbon deposits accumulate. When new oil is replaced, the engine may not adapt to the oil's viscosity immediately, potentially causing higher RPMs and resulting in louder engine noise. It is recommended to switch to high-quality engine oil. Insufficient Coolant: In low-temperature conditions, insufficient coolant levels can lead to increased engine noise. It is essential to regularly check the coolant level and top it up as needed. Abnormal Shock Absorbers: Issues with the vehicle's shock absorbers can also cause the engine noise to become louder. Drivers should pay attention to the condition of the shock absorbers during regular use to avoid potential malfunctions. If problems are detected, it is advisable to visit a repair shop for maintenance.
Was this review help?
9
2
Share
More Forum Discussions

How Long Can You Drive Without Gas?

You can drive approximately 10 kilometers after the fuel gauge reaches zero. Below are specific instructions for refueling your car: 1. Low fuel warning: When the low fuel warning light comes on, depending on the vehicle's fuel consumption, you can generally drive about 30 to 100 kilometers. If your dashboard has an onboard fuel consumption function, you can check the remaining driving distance and head to a gas station as soon as possible. 2. Timely refueling: Typically, when your car's fuel level drops to a quarter, you should refuel based on the actual situation. If the fuel runs out or remains critically low for a long time, it can shorten the lifespan of the fuel pump and pose a risk of breaking down.
14
1
Share

How to Maintain an Air Filter?

Air filters should be maintained according to the vehicle's maintenance schedule. Here is relevant information about air filter maintenance: 1. Maintenance Interval: Under normal road conditions, the air filter should be cleaned every 5,000 kilometers. In areas with heavy dust or poor air quality, the maintenance interval should be shortened accordingly, with cleaning recommended every 3,000 kilometers. Generally, the air filter should be replaced every 20,000 kilometers. 2. Application Areas: Air filters (Air-Filter) are mainly used in pneumatic machinery and internal combustion engines to provide clean air, preventing these mechanical devices from inhaling air containing impurities, which could increase wear and damage. 3. Replacement: After prolonged use, the filter element becomes dirty, increasing the air intake resistance. When the resistance exceeds the final resistance limit, the internal combustion engine may produce black exhaust smoke and experience power loss due to insufficient air supply. Users can check the blockage status of the air filter by observing the maintenance indicator attached to it. Once blockage occurs, the filter element should be cleaned or replaced immediately.
15
3
Share

What are the testing indicators for turbine oil?

The testing indicator for turbine oil is PH=7.5. Below is an introduction to related aspects of engine oil: 1. Increased fuel consumption: When adding engine oil, the oil level should be between the upper and lower marks on the dipstick. If too much oil is added, the engine's temperature will rise, causing the oil volume to expand, increasing the pressure in the oil chamber and operational resistance. This can lead to reduced vehicle power and increased fuel consumption. 2. Overfilling oil: Excessive oil can cause the crankcase breather pipe to leak oil, increasing crankcase pressure. The oil seal may loosen due to the oil pressure, leading to oil leaks. 3. Heat dissipation: Overfilling oil can affect the engine's heat dissipation.
7
3
Share

What does replacing the assembly mean?

Replacing the assembly refers to the replacement of the entire integrated unit of the car, including the internal combustion engine, starter, oil pump, etc. After replacement, it becomes a fully functional machine. Advantages of replacing the assembly in a car: In automotive repairs, the assembly replacement method is sometimes adopted. This involves removing a specific assembly from the car and replacing it with a new or repaired and inspected assembly, thereby reducing repair time and improving the organization and quality of the repair work. Impact of replacing the assembly on the vehicle: Mid-use replacement of the assembly is generally performed at repair shops or 4S stores. The replaced engine is not the original one but a reassembled version using the old engine block. The details of such replacements are certainly not as refined as the original factory assembly. Disassembling and reassembling the engine can affect wiring and other components, introducing many uncertainties in later use.
9
3
Share

Are There Any Disadvantages to Coating Windshield Washer Fluid?

The drawbacks of coating windshield washer fluid: Although it has the ability to form a coating, the duration of the coating is not long, and the film formed on the glass is irregular with very limited thickness. During use, it may not achieve the desired coating effect, and the resulting film may instead impair driving visibility and experience. Coating windshield washer fluid is a cleaning solution for car windshields, made from deionized water and various environmentally friendly additives. It has functions such as dirt removal, antifreeze, antistatic, and corrosion resistance. Below are specific details about coating windshield washer fluid: 1. Coating effect: Coating windshield washer fluid has the ability to form a protective film on the glass surface with long-term use. In rainy weather, it prevents water from sticking, providing drivers with stable and clear visibility, thereby enhancing driving safety to some extent. 2. Cleaning effect: Coating windshield washer fluid can provide a cleaning effect when driving in rain or snow, maintaining good visibility.
4
0
Share

What causes the Passat to shake at idle but not when accelerating?

The reasons why the Passat shakes at idle but not when accelerating are as follows: 1. Severe carbon buildup inside the engine: This is often manifested as carbon deposits on the throttle body, fuel injectors, spark plugs, and pistons. When these carbon deposits accumulate to a certain extent, they absorb combustion heat and may even cause detonation or knocking. If the fuel injectors become clogged, it can lead to poor atomization of fuel, resulting in fuel dripping and smoke, which not only increases fuel consumption but also pollutes the environment. 2. Ignition system issues: This is usually caused by excessive carbon buildup on the spark plugs or insufficient ignition voltage, leading to misfiring. It may even result in single or multiple cylinder misfires, causing insufficient engine power and resulting in shaking. Severe shaking can put the engine in a state between stalling and firing.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.