What Causes the Loud Engine Noise in Haval Big Dog?

3 Answers
SanArthur
08/31/25 5:40am
Haval Big Dog's loud engine noise is due to the oil not meeting lubrication requirements during cold starts, resulting in high RPM and loud noise. Below are the reasons for the loud engine noise in Haval Big Dog: Oil Not Meeting Lubrication Requirements: During a cold engine start, the temperature is relatively low, and the oil has not yet been distributed to all components. Additionally, the oil inside the engine has completely drained back into the oil pan due to prolonged parking. It takes about 1 minute of warm-up for the engine to achieve full lubrication, after which the idle speed returns to normal. High Engine RPM: To quickly bring the engine up to normal operating temperature, the RPM during a cold start is also higher. This is why the engine noise feels louder when starting a cold engine, and it may also be accompanied by some vibrations. Furthermore, due to the high idle speed and increased fuel injection, incomplete combustion may result in a noticeable gasoline smell.
Was this review help?
13
2
Share
CodyDella
09/13/25 2:06am
Hey, I think the issue of the Haval Big Dog's engine noise becoming louder is quite common. I've seen it a lot after driving for over a decade. The main possible reasons are excessive carbon buildup in the engine, leading to uneven combustion; aging spark plugs or ignition system problems can also increase noise; poor fuel quality or using low-grade oil makes the engine work harder; slight exhaust pipe leaks can make the sound more harsh; plus, the air conditioning compressor and fan generate extra buzzing when running on hot days. It's recommended to check if the fluids are sufficient or dirty as soon as possible, perform regular carbon cleaning maintenance, or switch to a high-quality engine oil. Cars are like people—they need proper maintenance to stay healthy, otherwise small issues can turn into costly major repairs. Safety first, don’t ignore unusual sounds while driving, and get it fixed at a professional shop early on.
Was this review help?
9
4
Share
Expand All
EllieRose
09/13/25 2:08am
My Haval Big Dog's engine has been a bit noisy lately, which scared me into thinking something was wrong. After consulting with some fellow car owners, I learned about the common causes. Mainly, it could be due to unclean fuel—poor-quality gas affects combustion; the engine makes louder noises when overheating; the air conditioning compressor also contributes some noise when starting up; the spark plugs might need replacing; or the oil in the oil pan could be too thin or overdue for a change, amplifying friction sounds. I plan to take it to the 4S shop for a full check-up next week to prevent the issue from worsening. Fellow car owners advised maintaining smooth driving habits to reduce stress—avoid slamming the accelerator and stick to regular maintenance for peace of mind and safety. Also, keep an eye on the dashboard warning lights to address issues early and avoid unnecessary expenses.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

What is the Rearview Mirror Heating Symbol?

The rearview mirror heating symbol is a pattern consisting of three upward-curving arrows paired with a rectangle. The location of the rearview mirror heating switch varies across different car models, but the symbol is generally similar. Rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog from the mirror, eliminating the need for drivers to manually wipe the mirror frequently and thereby reducing driving hazards. How to use the rearview mirror heating function: There are typically two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is required, as the driver's side has a dedicated adjustment button. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, usually between 35-60 degrees Celsius. The heat is then emitted from both left and right rearview mirrors. Meanwhile, due to the rising temperature and evaporation, water droplets on the mirror surface gradually shrink, and fog slowly dissipates, effectively defogging and deicing the mirror. However, if the rain is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves embedding electric heating wires in the mirror. These wires consume a significant amount of power. Therefore, when using this function, ensure the car is in an ignited state. Avoid activating rearview mirror heating while the car is stationary to prevent draining the battery and potentially causing starting issues. Other methods for defogging rearview mirrors include: Window ventilation: Open both side windows slightly to create airflow between the interior and exterior, reducing the temperature difference and allowing fog to dissipate gradually. Adjust the car's air conditioning to the appropriate setting to blow warm air for defogging.
7
4
Share

What causes the ABS and anti-skid lights to illuminate in a Nissan Teana?

The main reasons for the ABS and anti-skid lights illuminating in a Nissan Teana include sensor damage, ABS circuit failure, and ABS computer malfunction. Sensor Damage: If the sensor is damaged, the ABS computer cannot determine the vehicle speed signal, triggering the warning light. It is recommended to inspect and repair the sensor. ABS Circuit Failure: A short circuit in a certain line can cause this issue. Simply check the circuit. The anti-skid light illuminates because the ABS light is on, as they are interrelated. It is advisable to conduct a detailed inspection at a repair shop. Computer Malfunction: This refers to a fault in the computer that processes ABS signals. In this case, replacing the ABS or ABS/ASR computer is necessary. Function of ABS: It maximizes the effectiveness of the brakes, reducing braking time and distance; effectively prevents vehicle skidding and fishtailing during emergency braking, ensuring good driving stability; allows steering during emergency braking, providing excellent steering control; and avoids excessive friction between the tires and the ground, reducing tire wear.
17
2
Share

How to Steer While Reversing by Looking at the Rearview Mirrors?

Method for steering while reversing by observing the rearview mirrors: When reversing, pay attention to both the left and right rearview mirrors. To adjust the left mirror, position the horizon in the center, with the car body occupying one-fourth of the mirror's width. For the right mirror, place the horizon in the upper two-thirds to allow more ground visibility, while keeping the side adjustment the same as the left mirror. Control the vehicle speed carefully during reversing, avoiding unnecessary acceleration. Below are some precautions for reversing: 1. Watch for pedestrians and vehicles: Always check for pedestrians, electric bikes, etc., behind you when reversing. Slow down to minimize risks in case of unexpected incidents. 2. Be aware of road conditions: When reversing on wider roads, use the rearview mirrors to judge the position of the rear wheels or the car's tail. On narrower roads, if the mirrors don't provide a clear view, open the door slightly to observe the rear wheels while maneuvering. At intersections or street corners, expand your rear visibility range and be cautious of passing vehicles, pedestrians, and bicycles while reversing carefully.
17
5
Share

What is the difference between Mercedes-Benz Eco mode and Comfort mode?

The difference between Mercedes-Benz Eco mode and Comfort mode: In Comfort mode, the power is stronger than in Eco mode, and the throttle is more responsive, but the fuel consumption in Comfort mode is higher than in Eco mode; in Eco mode, the power is weaker, and the throttle response is slower, but the fuel consumption is lower. Below is an introduction to the five driving modes of Mercedes-Benz: 1. E mode: The full name is ECO mode, which is the most economical and energy-saving mode and can be used for normal driving on good roads. 2. C mode: The full name is Comfort mode, suitable for normal driving on urban roads when you want a relaxed and comfortable driving experience. 3. S mode: The full name is Sport mode, suitable for driving on suburban roads or highways. 4. S+ mode: The full name is Sport+ mode, suitable for overtaking and high-speed driving on highways. 5. I mode: The full name is Individual mode, which allows the driver to customize settings for power, steering, start-stop, and air conditioning according to personal preferences.
17
1
Share

Does a car in its sixth year require an on-site annual inspection?

A car in its sixth year requires an on-site annual inspection. Vehicles that fail the inspection must be repaired within a specified period. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit further driving. Vehicles that do not undergo the inspection without reason or fail the inspection are not allowed to drive on the road or transfer ownership. Vehicles that meet the scrapping conditions or exceed the prescribed service life will not be inspected, and their license plates will be revoked, their records deleted, and they will be scrapped. Annual inspection content: Check whether the engine, chassis, body, and their accessories are clean, complete, and functional; whether the paint surface is uniform and aesthetically pleasing; whether the main assemblies have been replaced and whether they match the initial inspection records. Test whether the vehicle's braking performance, steering control, lights, exhaust, and other safety features comply with the "Technical Conditions for Safe Operation of Motor Vehicles." Check whether the vehicle has been modified, remodeled, or altered; whether the driving license, license plate, and vehicle records match the actual condition of the vehicle and whether any changes have been approved and documented. Check whether the license plates, driving license, and enlarged license plate markings on the vehicle are damaged, altered, or illegible, and whether they need replacement. For large vehicles, check whether the unit name or the name of the street, township, or town where the vehicle is located and the seating capacity in the driver's compartment are printed in Chinese imitation Song font on both sides of the door as required. For trucks, check whether the rear tailgate (including the trailer's rear tailgate) is printed with the vehicle number enlarged 2-3 times as required. For individually or jointly owned vehicles, check whether the word "individual" is printed on both sides of the door. The printing must be clear, and unit codes or other patterns are not allowed (special cases require approval from the vehicle management office).
10
2
Share

Can a Physical Examination Form for License Renewal Be Used After Six Months?

Replacing a driver's license requires a physical examination form that is valid for 90 days. The physical examination for driver's license renewal should be conducted by a medical institution at or above the county level or a military medical institution at or above the regimental level, and a certificate of physical condition should be issued. For those applying to drive a disabled-adapted vehicle, a certificate of physical condition issued by a medical institution must be submitted. The validity period of the physical examination report for driver's license renewal is detailed as follows: 1. Introduction 1: According to the new traffic regulations, motor vehicle drivers should apply for license renewal at the vehicle management office of the driver's license issuing authority within 90 days before the expiration of their current driver's license. 2. Introduction 2: When applying, the applicant must fill out an application form and submit the motor vehicle driver's identity proof, the driver's license, and a certificate of physical condition issued by a medical institution at or above the county level or a military medical institution at or above the regimental level. 3. Introduction 3: The vehicle management office usually designates specific hospitals for physical examinations. Some driver's license processing centers have doctors stationed from 'medical institutions at or above the county level' who can conduct the physical examination on-site and fill out the 'Motor Vehicle Driver Physical Condition Certificate.'
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.