What causes the loud engine noise after parking the Range Rover Velar?

2 Answers
LeviAnn
07/24/25 5:58am
Range Rover Velar's loud engine noise after parking is caused by the operation of the cooling fan. The specific reasons and solutions are as follows: Detailed explanation of the reasons: After parking and turning off the engine, the engine temperature does not drop immediately. At this time, the cooling fan needs to work to dissipate heat from the engine to prevent the accumulation of residual heat, which could easily damage the plastic components and wiring harnesses inside the engine compartment. In severe cases, it may even cause the vehicle to self-ignite. If the loud noise is not caused by the cooling fan, then it may be due to a damaged water pump. Solutions: One effective method to address the loud engine noise is to install soundproofing cotton. Engine noise is mainly transmitted to the cabin through vibrations from the hood and front fenders. Therefore, installing high-quality sound-absorbing foam materials on the engine hood can not only suppress vibrations caused by the hood but also absorb a significant amount of noise, making it very effective.
Was this review help?
12
0
Share
SanKevin
08/11/25 1:43am
I've experienced this with my Velar too – hearing a buzzing sound from the engine bay after parking can be quite alarming. Most of the time, it's just the cooling fan running, especially in summer or after highway driving when the engine is hot. The fan automatically operates for a few extra minutes to cool things down. This is more noticeable in turbocharged models because the turbo needs cooling. Additionally, the exhaust system makes ticking sounds due to thermal expansion and contraction as metal parts cool down. However, if the noise is unusually sharp or lasts over 10 minutes, it could indicate low coolant, a stuck fan, or water pump issues – get it checked promptly to avoid engine overheating damage. Also, monitor your oil condition; overly dirty oil reduces cooling efficiency.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

What does 101w tire mean?

101w tire represents the load index and speed rating of the tire. 101 indicates a maximum load capacity of 825kg, and w means the maximum speed should not exceed 270 kilometers per hour. The speed rating refers to the highest speed a tire can achieve under specified load and pressure standards. The load index indicates the maximum load capacity of a single tire under specified conditions. Precautions for tire use include: 1. Ensure the tread has no cracks and regularly check the tire surface for defects such as cracks or deformations; 2. Avoid parking the vehicle on roads with large, sharp, or rough stones; 3. Do not use water to cool down overheated tires; 4. Avoid frequent use of brakes and emergency braking.
20
0
Share

How to Adjust the Steering Wheel of the Buick Excelle?

The adjustment method for the Buick Excelle's steering wheel is as follows: There is a black switch on the left side of the steering wheel that can be flipped to adjust the steering wheel up or down to a suitable position, then fix the adjustment lever. The Buick Excelle is a compact car with the following body dimensions: length 4609 mm, width 1798 mm, height 1486 mm, wheelbase 2640 mm, and a fuel tank capacity of 44 liters. The Excelle is equipped with a 1.3T turbocharged engine, delivering a maximum power of 120 kW at 5500 rpm and a maximum torque of 230 Nm between 1800 to 4400 rpm.
8
5
Share

What are the differences between the 2016 Civic and the 2019 Civic?

The differences between the 2016 Civic and the 2019 Civic are: 1. Different emission standards: The 2016 Civic meets the China V standard, while the 2019 model meets the China VI standard. 2. Different body lengths: The 2016 Civic has a body length of 4649 mm, while the 2019 model is 4658 mm long. 3. Different transmissions: The 2016 Civic is equipped with a 6-speed manual transmission, while the 2019 model comes with a continuously variable transmission (CVT). The similarities between the 2016 Civic and the 2019 Civic are: 1. Same body structure: Both are 4-door, 5-seater sedans. 2. Same powertrain: Both are powered by a 1.0T turbocharged engine, delivering a maximum horsepower of 125 hp and a maximum power output of 92 kW.
20
0
Share

What to Do When the Rear Window Defroster Wire Breaks?

When the rear window defroster wire breaks, it cannot be repaired and requires replacement of the entire glass. Methods for maintaining car glass include: 1. Proper use of glass cleaner; 2. Applying a protective film to the car glass; 3. Insuring the car glass; 4. Thoroughly removing dirt from the car glass; 5. Regularly replacing the rubber seals. Methods for cleaning car glass effectively are: 1. Wet the glass with water, apply toothpaste evenly, gently scrub with a sponge, then rinse clean; 2. Dilute glass cleaner with water, pour into a spray bottle, spray onto the glass, and wipe clean with a soft, lint-free cloth; 3. Spray a small amount of water on the glass and wipe with old newspapers back and forth.
7
0
Share

How often should the spark plugs of a Teana be replaced?

The spark plugs of a Teana are recommended to be replaced after driving more than 40,000 kilometers or approximately every three years. Under normal maintenance conditions, car spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is advisable to follow the user manual. The following standards can be referenced for maintenance replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check for external debris such as leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Install the removed high-voltage distributor wires in the firing order and secure the cover.
20
0
Share

What Causes Engine Abnormal Noise During Cold Start?

The causes of engine abnormal noise during cold start are: 1. Low oil pressure or wear in hydraulic lifters allowing air to enter; 2. Wear in valve rocker arms resulting in excessive valve clearance; 3. Throttle valve contamination due to accumulated sludge and carbon deposits; 4. Operational noise from carbon canister solenoid valve; 5. Malfunctioning fuel tank vent valve; 6. Fluid impact inside the recirculation pump; 7. Partial blockage in the fuel filter. Engine maintenance methods include: 1. Using high-quality engine oil; 2. Using qualified coolant; 3. Regularly cleaning radiator scale; 4. Periodic carbon deposit removal; 5. Timely replacement of three automotive filters; 6. Maintaining appropriate engine RPM.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.