What Causes the Loud Current Noise in Odyssey Hybrid at Low Speeds?

1 Answers
VonAubrey
07/29/25 9:19pm
Reasons for loud current noise in Odyssey Hybrid at low speeds: Poor audio cable connection: Because audio cables are most susceptible to current interference. Excessively long ground wire: Since ground wire current is relatively weak, if too long, it easily generates noise. Regardless of whether the grounding surface is good or not, the ground wire must be polished and cleaned at the point where it connects to the chassis screw, otherwise poor contact will produce current interference noise. Power line and audio line not routed separately: Because some car modification and beauty shop workers connect power lines and audio lines together, which can generate current interference noise. Software issues: Current noise in the audio system caused by software problems, such as differences in music formats or noise introduced during recording. Trying to play music in different formats can solve the problem.
Was this review help?
19
5
Share
More Forum Discussions

Are there any vehicles that can be driven without a driver's license?

Non-motorized vehicles do not require a driver's license, such as bicycles and electric bicycles. Currently, there are three types of approved driving models endorsed on a driver's license, namely Class A, Class B, and Class C (small cars), which are further subdivided into seven types to enhance targeted management. The refined Class C (small cars) will be specifically divided into four categories: C1, C2, C3, and C4. Among them, C1 is for manual transmission small car licenses, C2 is for automatic transmission small car licenses, and C3 and C4 are for small trucks, three-wheeled motorcycles, four-wheeled agricultural transport vehicles, and three-wheeled agricultural transport vehicles. Article 19 of the "Road Traffic Safety Law of the People's Republic of China": To drive a motor vehicle, one must legally obtain a motor vehicle driver's license. The application for a motor vehicle driver's license must meet the driving permit conditions stipulated by the public security department of the State Council; after passing the examination, the corresponding category of motor vehicle driver's license will be issued by the traffic management department of the public security organ. Article 11 of the "Road Traffic Safety Law of the People's Republic of China": When driving a motor vehicle on the road, the vehicle must display a motor vehicle license plate, place an inspection qualification mark and an insurance mark, and carry the motor vehicle driving license. The motor vehicle license plate must be displayed as required and kept clear and complete, and must not be intentionally obscured or damaged. No unit or individual may confiscate or detain a motor vehicle license plate.
9
0
Share

What is the top speed of the Volkswagen CC?

The Volkswagen CC can reach a top speed of 250 km/h. Top speed testing: The top speed is the maximum driving speed that a car can achieve under windless conditions on a level, good asphalt or concrete road surface. According to Chinese regulations, the last 500 meters of a 1.6-kilometer test section are used as the top speed test area, with four round trips conducted, and the average value is taken. Limiting the top speed: The top speed is different from the theoretical maximum speed (which refers to the best performance achieved by the engine in optimal conditions, limited to theory). For some high-performance cars, manufacturers often limit the vehicle's top speed through technical means (such as electronic speed limit functions) to protect the engine or comply with traffic regulations when the car leaves the factory.
9
3
Share

Can You Skip Gears When Shifting?

Manual transmissions do not allow skipping gears when shifting. Reasons why manual transmissions cannot skip gears: causes vehicle shaking and stalling, reduces vehicle power performance, and accelerates synchronizer wear. Mastering acceleration gear shifting: Accurately grasp the vehicle speed and engine RPM when performing acceleration gear shifts. If shifting occurs at too low a speed, the engine cannot provide sufficient power, which may result in noticeable vehicle shaking, prolonged shift time, or even stalling. Proper speed for gear shifting: When downshifting from a higher gear, ensure the speed has reduced to an appropriate level before shifting. Generally, this involves releasing the accelerator pedal to coast down to low speed or braking to low speed before engaging the lower gear. When upshifting from a lower gear: When upshifting from a lower gear, you should sequentially shift through each gear without "skipping gears." Skipping gears prolongs the shift time, deteriorates vehicle power performance, and increases synchronizer wear.
20
2
Share

Why does the BMW car's air conditioner not respond when turned on?

When the BMW car's air conditioner is turned on and there is no response, it may be due to a lack of refrigerant, a dirty condenser, or water in the pipeline. Below are the detailed explanations for these causes. Lack of Refrigerant: The loss of refrigerant is mostly due to leakage. If the car's air conditioner is not working properly and the issue recurs after refilling the refrigerant, it is important to pay attention. A relatively simple method to detect leakage is to observe the condenser surface through the grille for signs of oil wetting. If such a condition is present, it usually indicates a leakage in the condenser. Dirty Condenser: During summer, it is common to find the air conditioner not working properly. When visiting a 4S shop for repairs, the owner is often recommended to clean the radiator. The purpose of cleaning the radiator and condenser is mainly for heat dissipation. If poplar or willow catkins accumulate on the condenser, it can lead to phenomena such as excessive engine temperature or poor air conditioning performance. During cleaning, it is crucial to first use an air gun to blow away the debris before washing with a water gun. Otherwise, it may have the opposite effect, not only causing poor air conditioning performance but also increasing fuel consumption. Water in the Pipeline: There is a dryer in the car's air conditioning refrigeration system, whose task is to absorb moisture from the refrigerant. When the desiccant in the dryer is saturated, moisture can no longer be filtered out. When the refrigerant passes through the expansion valve orifice, its pressure and temperature drop, causing the water in the refrigerant to freeze in the small hole. This phenomenon can lead to poor refrigerant flow, increased resistance, and ultimately result in the air conditioner failing to cool.
1
1
Share

What is the maximum number of days for renewing a driver's license?

Driver's license renewal should normally be completed within 90 days. If the license has expired for less than one year, it can still be renewed normally without being canceled. Documents required for driver's license renewal: Original driver's license of the applicant; ID card and a copy of the applicant; Physical examination certificate issued by a county-level or above medical institution or military medical institution; Three one-inch personal photos of the applicant. Go to the vehicle management office to fill out the "Motor Vehicle Driver's License Application Form" and submit it along with the above documents to the relevant window of the vehicle management office for processing. Related services of the vehicle management office: The vehicle management office is mainly responsible for handling motor vehicle registration, modification, transfer, mortgage, and cancellation, as well as applications for driver's licenses, replacements, renewals, verifications, and other services related to motor vehicles and drivers.
5
1
Share

What is the fuel consumption of a 2.0T SUV in summer?

The fuel consumption of a 2.0T SUV in summer ranges between 7L/100km and 8L/100km. Factors affecting fuel consumption: Incorrect driving habits have the greatest impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues. Experts have conducted fuel consumption tests during acceleration and found that fuel consumption increases by 2 to 3 times compared to driving at a constant speed. Tips to reduce fuel consumption: If you want to save fuel, avoid frequent lane changes, overtaking, and merging. Besides increasing fuel consumption, these actions also raise the risk of accidents, and each gear shift consumes additional fuel. Even in traffic jams, try to queue in order. Cutting in line will only result in higher fuel consumption.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.