What Causes the Loose and Abnormal Noise When a Passat Drives Slowly on Bumpy Roads?

1 Answers
AmaraFitz
07/29/25 9:46pm
The loose and abnormal noise when a Passat drives slowly on bumpy roads is caused by issues with the shock absorbers, transmission, or steering column components. It is necessary to promptly identify the source of the noise and carry out repairs. Taking the Passat 2021 280TSI Business Edition as an example, it is a mid-size car launched by SAIC Volkswagen, with dimensions of 4933mm in length, 1836mm in width, and 1469mm in height, and a wheelbase of 2871mm. The Passat 2021 280TSI Business Edition is equipped with a 1.4T turbocharged engine, paired with a 7-speed dual-clutch transmission, featuring front-wheel drive. The front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
Was this review help?
5
4
Share
More Forum Discussions

How to Determine the Correct Orientation of a Tire?

For passenger car tires, there are several standards to determine the correct orientation: 1. For unidirectional tires, mount the tire on the rim according to the rotation arrow indicated on the tire sidewall. The rotation arrow on the sidewall should align with the forward direction of the vehicle. 2. For asymmetric tread tires, when installing the tire on the rim, ensure the side marked with 'outside' faces outward. 3. If the tire has raised white lettering or a sidewall protection layer, install the side with the raised white letters or protection layer facing outward. Consequences of incorrect tire installation: 1. Specifically for asymmetric tread tires, the tread pattern affects noise reduction, handling stability, wear resistance, and wet grip performance. 2. If the tire is mounted inside out, the difference may not be noticeable during normal driving. However, at higher speeds, such as during hard braking on the highway, emergency maneuvers, or driving through wet sections, the tire's grip imbalance will immediately become apparent.
1
2
Share

Are Four Wheel Hub Stickers Illegal?

Wheel hub stickers for cars are not illegal. According to Chinese laws, the area of car stickers must not exceed 30% of the vehicle's body area. If the sticker area exceeds the approved requirement and is too large without approval from the traffic management department, it will result in inconsistency between the vehicle's appearance and the registration certificate, which is considered illegal modification. The fine ranges from 500 to 1000 yuan. Since wheel hub stickers do not exceed 30% of the vehicle's body area, they are not illegal. Regulations on car stickers: Although Chinese laws allow the modification of vehicle body color, red is reserved for fire trucks, yellow for engineering rescue vehicles, and white and blue for national administrative law enforcement vehicles. Ordinary cars cannot use these colors. Therefore, when modifying a vehicle, it is necessary to choose an appropriate color and submit it to the relevant department for approval and review. Car stickers are just a common form of car decoration, and car owners should use them correctly and reasonably. Car stickers must not affect safe driving, body advertisements, or painting, nor should they affect the safe driving of other drivers. Such modifications are not allowed under the Road Traffic Safety Law.
1
1
Share

What is the fault code for Dongfeng Tianjin eecu message?

Dongfeng Tianjin eecu message fault code indicates that the vehicle control component (VECU) cannot receive signals from the engine control component (EECU), usually caused by loose connectors. More details about Dongfeng Tianjin are as follows: 1. Appearance: It inherits the multi-style cab design of Dongfeng Tianlong D310. Compared with similar products, the Dongfeng Tianjin cab has significantly improved operability and comfort. The interior width of the cab can reach 1876mm, providing spacious comfort. Additionally, there are many user-friendly designs: adjustable steering wheel, easily accessible switches, large-capacity storage compartments, cup holders, wide berths, etc. The D530 adopts cab overall sound insulation technology and a low-noise engine to reduce interior noise. The channel-style instrument panel design is convenient and comfortable; the cab hydraulic lifting system is lightweight and labor-saving; the use of semi-floating cab suspension and vibration-damping seats improves ride comfort. 2. Power: It is a four-stroke, water-cooled, inline four-cylinder, electronically controlled common rail fuel injection diesel engine, equipped with a BOSCH high-pressure common rail fuel injection system, achieving national III emission levels with the potential to upgrade to national IV.
2
4
Share

What is the average fuel consumption per 100 kilometers for a typical family car?

Fuel consumption per 100 kilometers = Fuel consumption (liters) ÷ Distance traveled (kilometers) x 100. The usual calculation method is to fill up the fuel tank when the fuel gauge light comes on, reset the trip meter to zero, and then record the trip meter reading when the fuel gauge light comes on again. Divide the amount of fuel added by the distance traveled and multiply by 100 to get the fuel consumption per 100 kilometers. Below are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. If the air conditioning cooling effect is poor, it will increase the fan speed and lower the temperature to achieve a cooling effect. 2. Frequent sudden braking: Frequent sudden braking is the main reason for high fuel consumption in cars. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid turning on the air conditioning too strongly in small-displacement cars: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately after getting in. First, open the windows, set the fan to a higher setting without turning on the air conditioning to expel the hot air inside the car. After the vehicle has cooled down moderately, then turn on the air conditioning.
17
5
Share

Is the Crown Considered a Luxury Car?

Toyota Crown belongs to the mid-to-large-sized luxury sedan category. The new Crown is equipped with a 2.0-liter turbocharged engine, codenamed 8AR-FTS. This engine delivers a maximum power of 173 kW and a peak torque of 350 Nm, with the maximum power achieved at 5200~5800 rpm and peak torque available from 1650~4400 rpm. The Toyota Crown measures 5020 mm in length, 1805 mm in width, and 1480 mm in height, with a wheelbase of 2925 mm. The exterior design of the Toyota Crown adopts the brand's family-style design language, featuring a prominent trapezoidal front grille adorned with thick chrome trim. The slim headlights on both sides incorporate sharp lines, distinctive styling, and an aggressive appearance, ensuring high recognition. The Toyota Crown utilizes MacPherson independent suspension at the front and multi-link independent suspension at the rear, with electric power steering. The 2.0T version of the engine is paired with an 8-speed automatic transmission. According to the Ministry of Industry and Information Technology, the 2.0T engine produces a maximum output of 173 kW and a peak torque of 350 N·m, with a top speed of 230 km/h and a combined fuel consumption of 7.4 L/100 km.
20
1
Share

Do Three-Year-Old Cars Need Fuel Additives?

Three-year-old cars do not necessarily require fuel additives, as it depends on actual needs. Fuel additives are just one type of fuel supplement, and using them on new cars may be somewhat wasteful—it's not too late to start after the car has driven tens of thousands of kilometers. Adding fuel additives benefits the car engine. The advantages of fuel additives are as follows: 1. Cleaning the fuel system: High-quality gasoline additives contain cleaning activation factors that help remove harmful substances such as gum deposits in fuel and engine carbon buildup. After continuous use, carbon deposits on the exhaust pipe are significantly reduced, and components like filters, exhaust valves, and the fuel system remain very clean. Enhances power performance; The nano-components in high-quality gasoline additives can adsorb and encapsulate gum deposits, generating gaseous "micro-explosions" in the combustion chamber under high temperatures, causing secondary atomization of fuel and promoting complete combustion, thereby improving engine power. 2. Improving atomization: Gasoline additives utilize nano-molecular materials to directly break long-chain carbon bonds in fuel molecules, creating "micro-explosions" in the combustion chamber. This leads to secondary atomization of gasoline, ensuring complete combustion, improving thermal efficiency, and reducing fuel consumption. Real-world comparative tests show that gasoline additives can save 3–15% of fuel. This is especially noticeable during long-distance highway driving, where fuel efficiency is visibly better than usual.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.