What causes the key light to flash in the car?

2 Answers
DeAlex
07/29/25 6:50pm
The reasons for the key light flashing in the car are: 1. The car cannot detect the key; 2. The key battery is dead; 3. The key is not within the working range or placed in a hard-to-detect area inside the car; 4. The key was taken outside the car while the ignition switch was in the OFF position. During daily use, avoid remote controlling from long distances, as frequent long-distance remote control can affect the battery life, causing it to drain faster. Most cars equipped with a one-key start system can start the engine normally by placing the key at the inspection point when the key battery is dead. Vehicles with a one-key start system have a dedicated key inspection point inside the car, which is used when the key battery is dead.
Was this review help?
15
5
Share
SanGideon
08/14/25 12:30pm
I've been driving for many years and have encountered the key flashing issue several times. That's usually due to a weak small battery; like the coin cell in the key fob, which lasts one to two years before flashing as a reminder. Replacing the battery promptly should fix it. If it still flashes after replacement, it might be an issue with the vehicle's anti-theft system, such as a key signal mismatch or receiver malfunction. I recommend not trying too many times randomly to avoid locking the car; just go directly to a repair shop to scan the diagnostic module. Daily care includes keeping the key dry and avoiding drops or water exposure; this can extend the battery life. Regularly checking the key's condition during maintenance is simple and worry-free, preventing startup failures at critical moments. Additionally, modern cars integrate electronic systems, and flashing lights also indicate minor issues that need attention.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

How many kilometers should a car run before replacing brake pads?

It depends on the car's mileage. Generally, they should be replaced every 50,000 kilometers. Here are methods to check if a car's brake pads need replacement: 1. Thickness - A new brake pad is typically about 1.5cm thick. With continuous friction during use, the thickness gradually wears down. Professional technicians recommend that when visual inspection shows the brake pad thickness has reduced to about 1/3 of the original (approximately 0.5cm), the owner should increase self-inspection frequency and prepare for replacement. 2. Listen for sounds - If a metallic scraping sound (like "iron rubbing iron") accompanies light braking, the brake pads must be replaced immediately. This indicates the wear indicators on both sides of the brake pads are directly contacting the brake disc, proving the pads have exceeded their limit. In such cases, the brake disc should also be inspected during replacement, as this sound often means the disc is already damaged. Simply replacing the pads may not eliminate the noise, and severe cases may require disc replacement. 3. Feel the braking force - As pads thin, braking efficiency decreases. You'll need to press the pedal deeper to achieve the same braking effect that previously required light pressure. When the initial braking response weakens noticeably (many drivers describe this as "soft brakes" or reduced stopping power), it's time to check if the pads need replacement.
1
3
Share

What to Do When the Gear Exclamation Mark Appears on the Dashboard?

Dashboard gear exclamation mark is the transmission system warning light. TCU, which stands for Transmission Control Unit, refers to the automatic transmission control unit. This function enables automatic transmission control, making driving simpler. The appearance of this symbol indicates an abnormality in the transmission. If this light comes on while driving, you should stop driving immediately and seek professional assistance at a 4S shop as soon as possible. Generally, only cars equipped with automatic transmissions have this light. Cars with manual transmissions do not have this light because manual transmissions lack computers and sensors, making them less prone to malfunctions.
7
3
Share

What Causes the Oil Warning Light to Illuminate When the Engine Overheats?

Engine oil warning light illumination during engine overheating is caused by excessively high engine temperature, insufficient oil level, sensor malfunctions, and other factors. Below is the classification of automotive engine types: Classification by Fuel Type: Internal combustion engines can be categorized into gasoline engines and diesel engines based on the fuel used. An internal combustion engine using gasoline as fuel is called a gasoline engine, while one using diesel is called a diesel engine. Gasoline and diesel engines each have distinct characteristics: gasoline engines feature higher rotational speeds, lighter weight, lower noise levels, easier starting, and lower manufacturing costs; diesel engines have higher compression ratios, greater thermal efficiency, and better fuel economy and emission performance compared to gasoline engines. Classification by Cooling Method: Internal combustion engines can be divided into water-cooled engines and air-cooled engines based on their cooling methods. Water-cooled engines utilize circulating coolant within the cylinder block and cylinder head water jackets as the cooling medium, whereas air-cooled engines use air flowing between the cooling fins on the outer surfaces of the cylinder block and cylinder head as the cooling medium. Water-cooled engines provide uniform cooling, reliable operation, and effective cooling performance, making them widely used in modern automotive engines.
8
3
Share

Can I Still Take the Test After Failing Subject 2 Five Times?

You cannot retake the test after failing Subject 2 five times. Here are the precautions for taking Subject 2: 1. Reverse Parking: The main points for deduction in reverse parking include pressing the line while reversing, the car not entering the parking space, exceeding the time limit, and not following the prescribed route. Reverse parking must be completed within 210 seconds; exceeding the time limit results in failure, and not following the sequence also leads to failure. Pay attention to the 30cm margin when reversing. 2. Parallel Parking: The main points for deduction in parallel parking involve the turn signal, the 30cm margin, and pressing the line. 3. Right-angle Turn: The main points for deduction in the right-angle turn are the turn signal and pressing the line. Operating the turn signal incorrectly after entering the test area deducts 10 points.
7
1
Share

What are the reasons for a battery not charging?

The reasons for a battery not charging include: dried-up electrolyte in the battery, broken plates, short-circuited plates, etc. The most common reason is plate sulfation, which hinders the normal flow of electrons, leading to a decrease in battery capacity, inability to function properly, and gradual aging. In this case, the battery needs to be replaced. The method for removing the battery is as follows: 1. The battery is located in the engine compartment. First, open the compartment and locate the battery. 2. Remove the battery terminal protective cover and the nuts on the fixed bracket. 3. First disconnect the negative terminal, then remove the positive terminal. The negative terminal is disconnected first to avoid short circuits, as it is connected to the vehicle body. 4. After removing all the fixing screws on the battery, the old battery can be taken out.
5
4
Share

How long does it take to prepare for Subject 4?

Subject 4 requires preparation for 6 class hours. Below are the specific details about Subject 4: 1. Concept: Subject 4 is an additional safety and common knowledge test following the Subject 3 road test. Officially, there is no such term as Subject 4. 2. Exam format: The test consists of 50 questions, primarily in the form of case studies, images, animations, etc. The total score is 100, with a passing score of 90. 3. Exam content: The main topics covered in Subject 4 include safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.