What Causes the Jerking Sensation When Starting an Audi A5?

What kind of engine oil should be used for Jetta?

Jetta should use SG5W40 engine oil. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. Taking the 2019 Jetta VS5 as an example, its body dimensions are: length 4419 mm, width 1841 mm, height 1616 mm, with a wheelbase of 2630 mm, a fuel tank capacity of 51 liters, and a body structure of a 5-door, 5-seat SUV. The 2019 Jetta VS5 is equipped with a 1.4T turbocharged engine, with a maximum power of 110 kW and a maximum torque of 250 N·m, paired with a 5-speed manual transmission.

7

0

Share

What does the Roewe i5 e-gear mean?

Roewe i5 e-gear refers to the fuel-saving economy mode. The Roewe i5 is a compact car under the SAIC Group, with body dimensions of: length 4601mm, width 1818mm, height 1489mm, wheelbase 2680mm, and a fuel tank capacity of 45 liters. The Roewe i5 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124kW and a maximum torque of 250Nm. It is paired with a 7-speed dual-clutch transmission, featuring front-wheel drive. The front suspension uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension.

8

3

Share

What is the difference between the clutch and the brake?

The difference between the clutch and the brake lies in their functions: the clutch is responsible for transmitting the engine's output torque smoothly to the transmission through the clutch assembly, while the brake utilizes the friction between the brake pads and discs, as well as between the tires and the ground, to generate significant friction. This converts the vehicle's kinetic energy into heat energy through friction, ultimately stopping the rotating parts. The coordination method for pressing the clutch and brake depends on different situations: 1. When starting the car: first press the brake, then the clutch, shift into first gear, gently lift the clutch until the car body shakes, then release the brake and clutch. 2. When shifting gears to accelerate: only press the clutch without pressing the brake. 3. When stopping the car: first press the clutch and then the brake.

7

4

Share

How to Use a Vehicle Spare Key?

Vehicle spare key usage method is: 1. Press the small round button on the car key to pop out the mechanical key; 2. Locate the driver's side door handle and remove its cover; 3. Insert the mechanical key into the small hole beneath the cover; 4. Pry open the door handle cover outward; 5. Insert the key into the door lock and turn to open the door. Car keys are divided into primary keys and spare keys, with the following differences: 1. Different appearance: Primary keys have buttons; spare keys are ordinary keys. 2. Different types: Primary keys are remote-controlled and can unlock doors remotely by pressing buttons near the car; spare keys are mechanical keys that require insertion into the door's keyhole to unlock.

11

0

Share

How Often Should Car Door Seals Be Replaced?

Car door seals should be replaced every 3 to 4 years. The functions of the seals are: noise reduction, waterproofing, and windproofing. The car door consists of the door body, door accessories, and interior trim panels. Its functions are: to provide access for the driver and passengers, isolate external disturbances, and to some extent, protect occupants from side impacts. The design requirements for car doors are: 1. Ensure convenient entry and exit for passengers, with an opening angle controlled at around 65 to 70 degrees; 2. During the opening process, there should be no interference with other parts; 3. The door should lock securely when closed and not open on its own while driving; 4. Have good sealing performance; 5. Have a large transparent area to meet lateral visibility requirements; 6. Have sufficient strength and rigidity to ensure reliable door operation, reduce door vibrations, improve vehicle side collision safety, and prevent door sagging.

3

2

Share

How to Distinguish Between Imported Cars and Domestic Cars?

Imported cars and domestic cars can be distinguished by: 1. Checking whether there are Chinese characters at the rear of the car; 2. Checking the vehicle identification number (VIN), where cars starting with the letter 'L' are domestic, while others are imported; 3. Differentiating through model configurations. Characteristics of imported cars include: 1. Exquisite craftsmanship; 2. Superior materials; 3. Better performance; 4. Excellent handling; 5. Superior ride comfort; 6. Fewer features compared to domestic cars. Characteristics of domestic cars include: 1. Grand appearance; 2. Relatively abundant features; 3. Convenient maintenance and servicing; 4. Inferior materials; 5. Higher vehicle failure rate; 6. Rough craftsmanship.

19

2

Share

What Causes the Jerking Sensation When Starting an Audi A5?

What kind of engine oil should be used for Jetta?

What does the Roewe i5 e-gear mean?

What is the difference between the clutch and the brake?

How to Use a Vehicle Spare Key?

How Often Should Car Door Seals Be Replaced?

How to Distinguish Between Imported Cars and Domestic Cars?

What is the principle of a governor?

What to Do If a Tree Falls on Your Car?

How to Adjust the Backrest of a Business Vehicle Seat?

Where is the Lynk & Co 03 Cabin Air Filter Located?