What Causes the Jerking Sensation When Shifting Gears While Driving?

1 Answers
Leonard
07/30/25 1:37am
Every vehicle experiences some degree of jerking sensation when shifting gears, though the intensity varies. Driver's control technique issues: The severity of gear-shift jerking is closely related to the driver's control skills. If the timing of gear shifting isn't properly mastered, a jerking sensation naturally occurs. Mismatch between RPM and gear position: Generally, at low speeds, if the engine RPM and vehicle speed just meet the gear-shift standard, the upshift jerking will be more pronounced. If the throttle is slightly larger, making both engine RPM and vehicle speed significantly exceed the gear-shift standard, the jerking sensation during shifting will be relatively smaller.
Was this review help?
18
5
Share
More Forum Discussions

What Types of Vehicles Are Suitable for 15W50 Engine Oil?

15W50 has a kinematic viscosity standard between 16.3mm2/s and 21.9mm2/s at 100 degrees Celsius. It is suitable for vehicles with high mileage and significant wear, as the increased gap between pistons and cylinders requires higher viscosity oil to maintain proper oil film thickness for lubrication. If the viscosity is too low, the oil may seep into the combustion chamber, leading to oil burning. Here is more information about engine oil: 1. Engine oil is used to protect the engine and extend its lifespan. It lubricates the engine, reduces internal temperatures, and prevents rusting of internal components. 2. Turbocharged engines should use fully synthetic oil, while naturally aspirated engines can use semi-synthetic oil.
18
1
Share

Where to Find the Vehicle Identification Number?

The Vehicle Identification Number (VIN) is an essential tool for identifying a car. A car's VIN consists of letters and Arabic numerals, comprising 17 characters that provide unique identification for the vehicle. It includes information such as the manufacturer, year, model, body type and code, engine code, and assembly location. Here are several ways to locate it: 1. The VIN is usually located at the lower left or right corner of the front windshield. 2. Check the car's trunk or engine frame. 3. Refer to the vehicle's factory nameplate and certificate of conformity. 4. The VIN can also be found on the car's invoice, insurance policy, vehicle registration certificate, and title document.
8
3
Share

What to Do If Your Car Gets Scratched?

If your car gets scratched, there are several solutions depending on the severity of the paint damage: 1. Hairline scratches can be easily removed with wax containing fine-cut polishing compounds. 2. For minor scratches, use wax with fine or medium-cut polishing compounds for repair. 3. For moderate scratches, take the car to a 4S shop for touch-up paint or use a touch-up pen with the same color code. 4. For deep scratches, visit a 4S shop for rust-proof primer treatment followed by surface paint repair. Here are methods to assess the severity of paint damage: 1. Hairline scratches: These are very fine scratches caused by airborne dust or sand while driving at high speeds, often undetectable by touch. 2. Minor scratches: These leave a visible but shallow mark on the paint, affecting only the clear coat layer. 3. Moderate scratches: These damage the color coat layer, which can be clearly seen and felt. 4. Deep scratches: These expose the metal body panel or cover an area larger than a fingernail, indicating damage beyond the primer layer.
16
5
Share

What is the fuel tank capacity of the Chevrolet Cruze?

The fuel tank capacity of the Cruze is 44 liters, as officially announced. Owners who have purchased the Cruze can also check this information on the vehicle's configuration sheet. The Cruze requires 92-octane gasoline, with a fuel consumption of 4.7-5.9L per 100 kilometers. A full tank can cover a distance of 746-936km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
11
5
Share

What is the fuel consumption of the BJ40?

The Beijing BJ40 series is equipped with two different displacement turbocharged engines, namely 2.0T and 2.3T, with fuel consumption ranging between 8.2-10.6L. Here is more information about the Beijing BJ40: 1. The Beijing Auto BJ40 is positioned as a hardcore SUV. In terms of body dimensions, the BJ40 measures 4350/1843/1837mm in length, width, and height, with a wheelbase of 2450mm. 2. The Beijing Auto BJ40 is equipped with a mechanical part-time four-wheel drive system and adopts a body-on-frame structure, with a five-link non-independent suspension at the rear.
4
2
Share

Does the handbrake generally brake the front or rear wheels?

Automobile handbrakes typically control the rear wheels, usually connected to the rear brake shoes via a steel cable linkage. Their function is to control the braking of the rear wheels, not the front wheels, primarily to prevent the vehicle from rolling when parked. Here are some precautions for using the handbrake: 1. Always remember to engage the handbrake when parking and turning off the engine. Especially on slopes, shift into gear, engage the handbrake, and wait for the vehicle to stabilize before exiting. 2. The handbrake is often used in conjunction with neutral gear. When briefly stopping at a red light, do not forget to engage the handbrake while in neutral. This not only prevents rolling but also allows the right foot to release the brake pedal for a brief rest. 3. Do not pull the handbrake too tightly. Many modern handbrakes operate with a spring mechanism and usually have multiple positions. The higher the handbrake is pulled, the tighter the spring becomes, so it should be pulled just enough to prevent the car from shaking.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.