What Causes the Jerking Sensation When Releasing the Accelerator Pedal in a Car?

2 Answers
SanJude
08/31/25 6:05am
Introduction to the causes of jerking sensation when releasing the accelerator pedal in a car: 1. Engine oil passage blockage. The engine's ignition, air intake, and fuel injectors collectively determine fuel combustion, which is also the source of the engine's power. If the air intake decreases, ignition weakens, or the amount of fuel injected reduces, the power will be insufficient, leading to a jerking sensation. 2. Jerking sensation during the start of an automatic transmission car. When attempting to accelerate sharply while driving, it requires pressing the accelerator pedal deeply. At this point, the automatic transmission will automatically downshift to increase the engine speed. When the speed reaches a certain level, it upshifts. After upshifting, because the speed will drop significantly, a relatively noticeable jerking sensation occurs. This situation is more common in automatic transmission models with fewer gears, such as 4-speed automatic models.
Was this review help?
4
1
Share
DallasFitz
09/13/25 2:32am
I've been driving for over a decade and have experienced throttle-off jerking issues, where the car suddenly feels like it's stuttering. The most common cause is problems with the fuel system, such as clogged fuel injectors or a weak fuel pump, leading to inconsistent fuel supply when releasing the throttle. Issues with the ignition system, like worn spark plugs or faulty ignition coils, can also make the engine respond unevenly. Additionally, worn clutch plates in automatic transmissions can exacerbate this sensation, especially at low speeds. The last time my car had this issue, I checked the air filter and found it was too dirty, affecting airflow—cleaning it made a big difference. Regular maintenance of the fuel system and transmission can effectively prevent these problems and ensure driving safety. I recommend having a mechanic inspect these components during every oil change.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What are the reasons why a car cannot start but can be push-started?

The reasons why a car cannot start but can be push-started are: 1. Insufficient battery power: In winter, the most direct impact on urban family cars is the battery. At low temperatures, the car's power consumption is significantly higher than in other seasons, and the battery's capacity also decreases due to the cold environment. 2. Restricted oil flow: This is more noticeable in extremely cold northern cities. 3. Frozen exhaust pipe or carbon buildup in the electronic throttle: Frozen exhaust pipes mainly occur in cars that are driven short distances between home and work, with low usage frequency. The water vapor from engine combustion freezes in certain parts of the exhaust pipe, and short trips are not enough to melt this ice. After a night, more ice forms, which over time affects the vehicle's starting and exhaust functions.
9
1
Share

How often should the Mazda3 Axela have its engine oil changed?

The recommended oil change interval for the Mazda3 Axela is every 5,000 kilometers. Engine oil, also known as engine lubricant, serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. The Mazda3 Axela is a vehicle produced by Changan Mazda, representing the third model to incorporate the new-generation Skyactiv technology and the KODO "Soul of Motion" design theme. It is equipped with two Skyactiv-G gasoline engines and features the first-ever application of the MZD Connect infotainment system, built upon an advanced human-machine interface that prioritizes driving safety. The vehicle's overall configuration consistently reflects a technologically advanced and user-friendly driving experience. In terms of dimensions, the Mazda3 Axela measures 4,582mm in length, 1,795mm in width, and 1,458mm in height.
6
0
Share

How to drain the coolant from a Skoda Octavia radiator?

The drain port of the Skoda Octavia radiator is located at the bottom, requiring vehicle lifting and hose disconnection for drainage. The car radiator, generally referring to the automobile cooling system, functions to dissipate heat. Coolant absorbs heat in the water jacket, flows to the radiator to release heat, then circulates back to the water jacket for temperature regulation. The Skoda Octavia is a sedan under the SAIC Skoda brand, with body dimensions of 4572mm in length, 1769mm in width, and 1462mm in height. The Octavia adopts Skoda's new family design language, showcasing a simple, fashionable, and elegant styling with refined detailing. Notably, it features an integrated panoramic sunroof with black elements extending from the front to the middle of the roof. The extended full-opening design creates excellent visual continuity and enhances cabin transparency.
11
0
Share

What is the operation process of the right-angle turn in Subject 2?

The operation process of the right-angle turn in Subject 2 is: after hearing the test voice instruction, engage the 1st gear to move forward with the clutch in a semi-engaged state. From inside the car, observe that the right front of the car is about one-third into the outer edge line of the lane. When the car reaches the point where the driver aligns with the protruding point of the right-angle turn, quickly turn the steering wheel fully to the left. When the car body is parallel to the edge line, quickly straighten the steering wheel and smoothly drive out of the right-angle turn. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skill test subjects. The test items for small cars C1 and C2 include reversing into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-turns) (some areas also include a sixth item, high-speed card collection).
6
4
Share

How to reset the tire pressure light on a Volkswagen Sagitar?

The method to reset the tire pressure light on a Volkswagen Sagitar is: Press and hold the tire pressure monitoring SET button located on the right side in front of the gear shift lever for more than 3 seconds. Upon hearing a beep sound, the tire pressure warning light on the dashboard will turn off, indicating that the tire pressure light has been reset. The purpose of the tire pressure light is to monitor tire pressure; if any tire's pressure is abnormal, the light will illuminate to alert the driver. The Volkswagen Sagitar features a hexagonal design for its front grille, with chrome trim above the headlights seamlessly blending into the upper edge of the grille, creating a refined look. In terms of lighting configuration, it is equipped with full LED lens headlights (integrated with L-shaped LED daytime running lights). Additionally, higher trim models include automatic headlight leveling, AFS headlight cornering function, MDFS intelligent high beam dynamic assist function, and headlight washer function.
18
3
Share

What does it mean when a teapot icon appears on the car dashboard?

The appearance of a small teapot dripping water icon on the dashboard indicates that the "engine oil warning light" is illuminated. This light is used to display the oil pressure status within the engine. Only normal oil pressure can ensure that oil is delivered to all friction surfaces of the engine. If the pressure is too high or too low, it can affect the normal operation of the engine and even cause damage to engine components. Below is additional information about possible reasons for the "engine oil warning light" alarm: Insufficient engine oil level, which reduces the oil pump's output or prevents it from pumping oil due to air intake, leading to a drop in oil pressure. An excessively high engine temperature can thin the oil, causing it to leak excessively through the gaps and resulting in decreased oil pressure.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.