What causes the jerking sensation when driving the Qashqai?

2 Answers
Athena
07/29/25 4:02am
The reasons for the jerking sensation when driving the Qashqai are as follows: 1. Severe wear: The friction plates inside the transmission are severely worn, with uneven surfaces, causing jerking during contact. 2. Worn plungers: The plungers inside the valve body are severely worn, leading to poor operation of the plungers within the valve body. 3. Uneven road surface: Generally, when driving on uneven roads, the vehicle will experience a jerking sensation. Relevant information about the Qashqai is as follows: 1. Qashqai: It is the first product developed by Nissan's European Design Center, positioned between a compact SUV and a hatchback. 2. Body dimensions: The length, width, and height are 4315/1783/1606mm respectively, with a wheelbase of 2630mm.
Was this review help?
10
3
Share
Marlene
08/12/25 7:48am
I totally get what you mean about the Nissan Qashqai having that jerky feeling when driving – it’s like someone suddenly yanks the car, super annoying. The most common culprit is usually the ignition system acting up; worn-out spark plugs or faulty ignition coils can make the engine hiccup, causing that stuttering sensation during acceleration. The CVT transmission is another big suspect since the Qashqai often uses this setup—if the transmission fluid’s dirty or the belt’s worn, jerking kicks in. The fuel system might also be to blame, like clogged injectors or a weak fuel pump messing up the fuel spray and ruining power delivery. My advice? Start by checking these wear-prone parts before repairs get pricier. If that doesn’t help, hit up a pro shop to scan for trouble codes—they’ll nail the issue for sure.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

Where is the OBD port on the Buick Excelle?

This car's OBD interface is located behind the coin box on the driver's side. Here is some relevant information: 1. The Excelle is a compact sedan under the Buick brand, equipped with a 1.3L naturally aspirated engine. This engine is a three-cylinder unit with a maximum power output of 79kW and a maximum torque of 133Nm. The peak power is achieved at 6,200 rpm, while the peak torque is reached at 4,000 rpm. The engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT. The CVT has a simple structure, compact size, and lightweight design, commonly found in affordable compact automatic family cars. The CVT allows the engine to operate within an optimal RPM range, contributing to better fuel efficiency. 2. The Excelle uses a MacPherson strut front suspension and a compound torsion beam rear suspension. The use of a torsion beam suspension in this compact family car is partly due to cost constraints and partly to maximize rear passenger and trunk space. 3. The three-cylinder engine in the Excelle also performs well in vibration suppression. Many Buick models utilize three-cylinder engines, which are compact, lightweight, and offer good fuel economy.
6
4
Share

How to Start a Volkswagen When the Key Fob Battery is Dead?

To start a Volkswagen when the key fob battery is dead, follow these steps: 1. First, use the mechanical key to pry open the rightmost decorative cover on the left front door handle. 2. Then, use the mechanical key to unlock the door. 3. Once inside the car, insert the key into the ignition switch and start the vehicle. Additional Information: The method for replacing the remote key battery is as follows: 1. First, eject the mechanical key, then position the key with the logo facing upwards. Next, insert a flat-head screwdriver into the mechanical key slot. 2. Rotate to loosen the key clasp, apply force to both sides, and pry open the back cover of the key. 3. At this point, the key battery will be exposed. Remove the old battery, install a new one, and the battery replacement is complete.
13
4
Share

What does 'door' mean in a car?

Here is an introduction about 'door': 1. The 'door' in a car refers to the reading light's activation mode. 'Door' means 'door', and on the reading light, it means that when the car door is opened, the overhead light will turn on. 2. If the car door is opened or not closed properly: the 'door' light will also turn on, serving as a warning. 3. The interior reading light generally has three position switches: off, on, and door. When the reading light's control switch is in the 'door' position, if the car door is opened, the light will turn on; when the driver exits the car and removes the key, the reading light will stay on for 15 seconds before turning off; when the mechanical key is not inserted into the ignition switch, turning the ignition switch to the LOCK position will also activate the light. When the driver's side door is locked, or the ignition switch is turned to the ON position, regardless of the state, the reading light will turn on; when the reading light's switch is in the OFF position, the light will not turn on no matter the vehicle's state.
12
3
Share

Is the fuel tank cap of the Evo round or square?

The fuel tank cap of the Evo is square. Relevant information is as follows: 1. The Evo's cockpit is designed according to ergonomic principles, with various control keys arranged in a user-friendly and convenient manner. The steering wheel integrates paddle shifters and audio control buttons, allowing the driver to focus solely on the road ahead. 2. The Evo offers effortless handling. Soundproof doors, a fully automatic air conditioning system, and a spacious interior create a comfortable and quiet environment for both the driver and passengers. The wide body provides even more generous interior space, particularly offering rear passengers greater legroom, headroom, and a higher seating position.
19
3
Share

What is the replacement process for brake pads?

Car brake pad replacement process is as follows: 1. Remove the tire. 2. Disconnect the brake warning sensor connector (this step can be skipped if there is no brake warning sensor). 3. Remove the caliper mounting bolts and take off the brake caliper. 4. Use special tools to push the caliper piston back to its original position. 5. Remove the old brake pads and install the new ones. 6. Finally, reinstall the brake caliper and reconnect the brake warning sensor. Here is more information about brake pads: 1. Car brake pads, also known as brake linings, refer to the abrasive materials fixed on the rotating brake drum or disc. The friction lining and friction blocks bear external pressure to generate friction, thereby achieving the purpose of vehicle deceleration. 2. Car brake pads need to be checked and replaced regularly.
14
3
Share

How Many Liters of Antifreeze Should Be Added to a Family Car?

Family cars typically require 4 to 6 liters of antifreeze, and the fluid level should be between the MAX and MIN lines. Methods for selecting antifreeze: The basic indicators of antifreeze are the freezing point and boiling point. The market offers antifreeze with freezing points of -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose one with a freezing point at least 10°C lower than the lowest temperature in your region. Methods to determine if antifreeze is low: Observe the antifreeze warning light on the dashboard. If it lights up, it is likely due to low antifreeze levels, although it could also be caused by excessively high engine temperatures. Check the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add antifreeze promptly. Check the water level markings on the antifreeze tank. The normal antifreeze level should be between the maximum and minimum marks. If the antifreeze is below the minimum mark, it indicates a deficiency.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.