···
Log in / Register

What Causes the Jerking Sensation When Accelerating in an Odyssey?

4 Answers
EliAnn
07/29/25 9:26am
Specific reasons for the jerking sensation when accelerating in an Odyssey: 1. Normal phenomena: (1) Manual transmission models: When driving in a semi-clutch state, both accelerating and decelerating can cause a jerking sensation. The deeper the throttle is pressed, the more pronounced the jerking sensation becomes. (2) Automatic transmission models: There may be a slight jerking sensation during upshifting when accelerating. The sensation is more noticeable when forcing a downshift and then upshifting with a heavy throttle. 2. Abnormal phenomena: (1) Excessive carbon buildup: Carbon deposits in the throttle body, fuel injectors, and intake manifold. Many malfunctions are caused by carbon buildup, and some vehicles may experience jerking sensations due to this issue. It is recommended to regularly clean carbon deposits. (2) Poor fuel quality: Leads to incomplete combustion. It is advised to fill up with higher-quality gasoline at reputable gas stations. (3) Spark plug failure: Can cause misfires and other issues. It is necessary to have the vehicle inspected and repaired at a service center promptly to avoid further safety hazards.
Was this review help?
14
0
Share
LucyRose
08/12/25 9:54am
I've encountered similar issues with my Odyssey. The jerking when stepping on the gas is mostly caused by transmission problems, such as low CVT fluid level or dirty/aged transmission fluid, which makes gear shifts rough and inconsistent. It could also be ignition system issues - bad spark plugs or unstable ignition coils leading to inconsistent power output. Don't overlook the fuel system either - clogged fuel injectors, dirty fuel filters, or unstable fuel pump pressure can all cause jerking. Sometimes it's excessive carbon buildup in the throttle body or a faulty mass airflow sensor affecting air intake and acceleration. I've found that regular transmission fluid checks and replacing the three filters (air, oil, and fuel) can significantly reduce these problems. Don't wait until it gets serious - it affects driving experience and shortens engine life.
Was this review help?
9
2
Share
Expand All
McAaliyah
10/06/25 5:42am
When driving my Odyssey, I experienced severe jerking upon acceleration. After some research, I found it's often caused by transmission issues, such as delayed gear shifts or internal component wear. Worn spark plugs or cracked ignition coils are also common culprits, resulting in intermittent power during acceleration. Another possibility is uneven fuel injection or clogged fuel lines leading to insufficient fuel supply. My friend's car had unstable ECU control, where the system misjudged signals causing jerking. Later, I went to the repair shop and replaced the spark plugs and cleaned the fuel system, which basically solved the problem. I recommend addressing it early; don't wait six months like I did, as driving during that period was always nerve-wracking.
Was this review help?
20
2
Share
Expand All
LeNolan
11/19/25 7:09am
Technically speaking, the hesitation in the Odyssey may stem from power transmission interruptions. The CVT transmission is precisely designed, and deteriorated oil can cause belt slippage issues; ignition components like spark plugs with carbon buildup lead to inconsistent combustion and vibrations; abnormalities in the fuel system such as unstable fuel injection; or sensor failures, resulting in inaccurate feedback and delayed responses. Maintaining clean components and using high-quality oil can alleviate these issues. Don't underestimate minor problems, as prolonged neglect can lead to more significant damage.
Was this review help?
14
5
Share
Expand All
More Forum Discussions

Is mercedeses a Mercedes-Benz?

mercedeses is a sedan series of Mercedes-Benz. Here is a detailed introduction about it: 1. Introduction 1: Mercedes is a German automobile brand renowned for luxury and high performance, headquartered in Stuttgart, Germany. 2. Introduction 2: Mercedes-Benz also has a complete product line of medium and large commercial vehicles and the ultra-luxury car brand Maybach, as well as the small energy-efficient car brand Smart. 3. Introduction 3: Mercedes is Spanish for elegance, representing the concept of cars produced by Daimler.
5
5
Share

Which car brand has the slanted H logo?

Slanted H logo represents Hyundai. Here are some details about Hyundai: 1. Hyundai's emblem features a tilted 'H' inside an oval. The oval symbolizes the Earth, representing Hyundai's global business operations. 2. The letter 'H' stands for the first letter of HYUNDAI in English, while also artistically depicting two hands shaking, signifying trust and support between Hyundai and its customers. Hyundai's brand philosophy is built upon its business principles, core values, and corporate vision.
11
0
Share

What grade of gasoline should the Avalon use?

The Avalon is recommended to use 92-octane gasoline, with a fuel tank capacity of 60 liters. For safety, ensure the engine and all power sources are turned off during refueling to prevent fires caused by electrical currents or high temperatures. The fuel tank cap can be opened by pressing it without locking the car. Below are precautions for refueling the Avalon: 1. Correctly place the fuel nozzle inside the fuel filler to prevent overflow and potential fires, which could cause personal injury. 2. After refueling, ensure the fuel tank cap is securely closed to avoid accidents due to evaporation or spillage. 3. It is not advisable to remain inside the vehicle during refueling. If someone must stay in the car, close the doors tightly and avoid using electronic devices. Additionally, touch a metal surface to discharge static electricity before handling the fuel nozzle again. 4. Strictly prohibit smoking, making phone calls, or similar activities during refueling. 5. If the remaining fuel level is below 1/4, promptly visit the nearest gas station to refuel to prevent breakdowns.
16
4
Share

Why is there water leaking from the hole in the exhaust pipe of the Vision X6?

It is normal for the exhaust pipe of the Vision X6 to have a hole leaking water. The reasons are explained below: 1. When gasoline burns in the engine, it produces carbon dioxide and water as the main byproducts. Carbon dioxide is expelled with the exhaust gases, while water vapor condenses into water at the end of the exhaust pipe when the temperature is relatively cool. The small holes in the exhaust pipe muffler are designed to drain this condensed water. Generally speaking, water dripping from the exhaust pipe indicates good combustion conditions in the engine. 2. If water continuously flows from the exhaust pipe, it may be due to weather conditions where the temperature difference between the external environment and the engine is significant enough to cause exhaust gases to liquefy upon cooling, resulting in continuous water leakage.
15
4
Share

How to reset the tire pressure monitoring system of Audi Q7?

Audi Q7 tire pressure monitoring reset method: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "beep" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally the dashboard warning light will turn off, completing the tire pressure reset. Solutions for insufficient tire pressure: If no damage is visible, you can directly inflate the tire to the normal pressure and then reset the tire pressure system; If a puncture is found upon inspection, drive to a tire shop promptly for repair, then reinflate the tire; If the tire pressure warning reappears some time after inflation but there is no puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and may lead to veering, which are factors detrimental to driving safety.
6
1
Share

Why are the dashboard lights of BYD F3 not working?

The reasons why the dashboard lights of BYD F3 are not working: the dashboard illumination light is damaged, the dashboard power supply wire is short-circuited, or the dashboard power supply fuse is blown. Here is more information about the car dashboard: 1. The car dashboard is a device that reflects the working conditions of various systems of the vehicle. 2. Under the faceplate of modern car dashboards, there are various indicator lights or warning lights installed, such as coolant level warning light, fuel level indicator, washer fluid level indicator, charging indicator, high/low beam indicator, transmission gear indicator, ABS warning light, traction control indicator, airbag warning light, etc.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.