What causes the jerking in the Yidong XT transmission?

What noise does a broken differential make?

When the differential is broken, it will make a "thumping" sound. The differential is designed to allow the left and right wheels to rotate at different speeds when the car is turning or driving on uneven roads, ensuring that both driving wheels perform pure rolling motion. The differential is installed to adjust the speed difference between the left and right wheels. A broken differential can cause the following issues: 1. Abnormal vehicle noise, and in severe cases, the vehicle may become unable to move; 2. The two drive half-shafts will be rigidly connected, causing the left and right wheels to rotate at the same speed, which means the car can only drive straight and cannot turn; 3. It will increase tire wear during turns, leading to severe mechanical damage.

15

4

Share

Is the Vezel a Four-Wheel Drive?

The Vezel is not a four-wheel drive; it adopts a front-engine, front-wheel-drive configuration. This vehicle is a compact 5-door, 5-seat SUV with dimensions of 4328mm in length, 1772mm in width, and 1605mm in height, a wheelbase of 2610mm, a fuel tank capacity of 50 liters, and a luggage compartment capacity ranging from 437 to 1456 liters. The Vezel is equipped with a 1.5L naturally aspirated engine and a 6-speed manual transmission, delivering a maximum power of 96 kilowatts, a maximum torque of 155 Newton-meters, and a maximum horsepower of 131. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam rear suspension.

3

1

Share

How to Solve Water Droplets on Camry Windows?

Water droplets on Camry windows occur because there are some fine hairs on the rubber strips at the lower edge of the window glass. When these hairs get wet, they cause water droplets to appear when the window is rolled up or down. This is not a problem; simply wipe the water away with a towel. In terms of body dimensions, the 2021 Camry 2.0E Elite Edition measures 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. The Camry is manufactured by GAC Toyota, classified as a mid-size sedan, with a body style of a 4-door, 5-seat sedan and a naturally aspirated engine. Under the hood, the 2021 Camry 2.0E Elite Edition is equipped with a 2.0L engine, delivering a maximum horsepower of 178 and a maximum torque of 210 Nm.

3

Share

Does Privacy Glass Require Tinting Film?

Privacy glass requires tinting film. During the manufacturing process of privacy glass, specific pigments are added to give the glass heat insulation and light-blocking properties. However, privacy glass cannot effectively block infrared rays, which can still cause excessive heat inside the vehicle. Therefore, it is necessary to apply tinting film on privacy glass. Precautions after applying car tinting film include: 1. Avoid rolling down the windows within three days after application to prevent displacement of the film that hasn't fully adhered; 2. Do not wash the car for three days, but you can use a damp towel, sponge, or soft cloth to clean the film surface; 3. For vehicles with sunroofs, avoid opening the sunroof while driving, especially at high speeds, within three days; 4. Do not clean the heat insulation film or turn on the defroster switch within one week after application.

6

5

Share

How to Open the Trunk of a Toyota Car?

Toyota car trunk opening methods are: 1. Use the trunk button on the remote key to open it; 2. For vehicles equipped with a one-touch start system, carry the electronic key and press the button on the luggage compartment cover to open the trunk. When all doors are locked and the luggage compartment cover is closed, even if the electronic key is left inside the trunk, the key anti-lockout function will be activated. Taking the Toyota Crown as an example, its minimum ground clearance is 140mm, with body dimensions of 5020mm in length, 1805mm in width, and 1480mm in height, a wheelbase of 2925mm, a fuel tank capacity of 70 liters, a trunk capacity of 510 liters, and a body weight of 1680kg. The front suspension of the Crown 2.0t is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension.

15

0

Share

What are the reasons for the long delivery time of BYD Han?

The reasons for the long delivery time of BYD Han are as follows: 1. It is necessary to check all the materials of the vehicle: including the purchase invoice, certificate of conformity, vehicle consistency certificate, motor vehicle registration certificate, three-guarantee certificate, vehicle user manual, and new vehicle delivery confirmation form. If the 4S shop is responsible for licensing and handling insurance, then you also need to obtain the original insurance policy, insurance invoice, compulsory traffic insurance invoice, vehicle and vessel tax invoice, purchase tax invoice, tax payment certificate, and compulsory traffic insurance logo from the salesperson. 2. It is necessary to check all the conditions of the vehicle: in terms of appearance, check the paint, production date of the window glass, tires, trunk, and engine; in terms of interior, pay attention to checking the functions of the car, such as lights, windows, rearview mirrors, central control panel, air conditioning, etc.

18

5

Share

What causes the jerking in the Yidong XT transmission?

What noise does a broken differential make?

Is the Vezel a Four-Wheel Drive?

How to Solve Water Droplets on Camry Windows?

Does Privacy Glass Require Tinting Film?

How to Open the Trunk of a Toyota Car?

What are the reasons for the long delivery time of BYD Han?

How to use wireless charging in BMW 530li?

How to Replace the Battery in a Superb Key?

Can the Wuling Hongguang S carry 2000 jin?

What are the dimensions of the Geely Emgrand GS?