What causes the intermittent cooling and heating of the BYD e5 air conditioning?

3 Answers
DiHazel
07/29/25 9:10am
Here are the reasons for the intermittent cooling and heating of the BYD e5 air conditioning: 1. Loose compressor wiring: When the air conditioning is first turned on, the compressor starts working, compressing the gaseous refrigerant in the system into a high-temperature, high-pressure gas, which is then sent to the condenser for cooling. After cooling, it becomes a high-temperature, high-pressure liquid, passing through the dryer for drying and filtration, then through the expansion valve and evaporator, before returning to the compressor. 2. Poor contact of the pressure switch: When the high-temperature, high-pressure liquid passes through the expansion valve, all the liquid expands and undergoes a drastic change, turning into a low-temperature, low-pressure liquid. This low-temperature, low-pressure liquid causes the temperature of the evaporator to drop rapidly, so the air blown by the air conditioning motor becomes cold after passing through the evaporator. 3. Compressor clutch failure: When the temperature gradually rises above 0 degrees, the ice blockage in the pipeline begins to slowly melt, and part of the pipeline resumes refrigerant circulation, restoring the cooling effect. This leads to the next cycle of ice blockage, resulting in the phenomenon where the air conditioning blows cold air when first turned on but soon turns into hot air.
Was this review help?
18
0
Share
DeSilas
08/12/25 8:43am
I once encountered an issue with the BYD e5's air conditioning system where it would intermittently blow hot and cold air. This is usually caused by a refrigerant leak. The air conditioning system requires a stable amount of refrigerant; if the level is insufficient or there's a minor leak, the compressor will malfunction, leading to alternating hot and cold air. Another common cause is a clogged cabin air filter, which can obstruct airflow and reduce cooling efficiency. This problem becomes particularly annoying during summer drives and can also increase fuel consumption. I recommend first checking the refrigerant sight glass to see if the level is too low. If the filter is dirty, replacing it yourself isn’t too difficult. Regular maintenance is crucial—I take my car to a professional shop every year for an air conditioning system inspection to ensure there are no leaks or other hidden issues. In short, ignoring this problem could damage the air conditioning system, so addressing it early can save both hassle and money.
Was this review help?
13
3
Share
Expand All
McFinn
10/06/25 4:09am
In repair experience, intermittent cooling and heating of the BYD e5 air conditioning is commonly caused by compressor clutch failure. If the clutch is worn or stuck, it may engage and disengage erratically, leading to unstable cooling. The temperature control sensor could also be problematic—if it inaccurately detects cabin temperature, it may send incorrect commands to the system. Circuit short circuits should not be overlooked either, as they may damage the control module, causing unstable output. During troubleshooting, it's best to use a diagnostic tool to read fault codes for quick identification of the root cause. Before starting any work, remember to turn off the engine and check if the battery voltage is normal, as unstable voltage can also affect performance. If DIY repair isn't feasible, promptly take the car to a professional shop to avoid compromising driving comfort and safety. Regular maintenance can help minimize such issues.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

Is running a red light photographed from the opposite side or the rear?

Both. Electronic cameras capture three photos to determine a red light violation: a photo of the vehicle crossing the intersection stop line, including the red light and license plate number; a photo of the vehicle completely passing the stop line, including the red light and license plate number; and a photo of the vehicle continuing to move, comparing changes in the vehicle's position, including the red light and license plate number. Capturing these three photos confirms a red light violation. The act of running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light prohibits passage, a green light permits passage, and a yellow light serves as a warning. Running a red light is a traffic violation when a vehicle passes through an intersection during a red light. Here are some tips to avoid running a red light: First, observe the arrow light, then the circular light: Currently, there are two types of traffic lights: arrow traffic lights and circular traffic lights. If an arrow light is present, check it first, then the circular light, to avoid running a red light. Note: When encountering a circular red light, right turns are permitted; but if the right-turn arrow is red, right turns are prohibited. Violations will be penalized as running a red light. Brake in time: When the red light turns on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture it, resulting in a red light violation. If the front wheels have just crossed the stop line when the light turns red, do not proceed; wait for the green light. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, use it to judge whether to proceed. If there is no countdown and the vehicle is close to the intersection at high speed, it may proceed to avoid braking too late. If the speed is low and the vehicle is far from the intersection, brake immediately to avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motorized vehicle or pedestrian signals, non-motorized vehicles and pedestrians must follow the motor vehicle signals. When the red light is on, right-turning vehicles may proceed if they do not obstruct other vehicles or pedestrians. Running a red light is not penalized under the following circumstances: Extreme weather: If visibility is so low that even electronic police cannot clearly see the traffic light, resulting in blurry evidence, no penalty will be issued for mistakenly running a red light. Emergency situations: When transporting a critically ill patient to the hospital, running multiple red lights may occur. After delivering the patient, provide hospital or patient documentation to the traffic police for verification. If confirmed, the violation records will be cleared. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Police officer direction: During peak hours, traffic police may direct traffic at key intersections. Drivers must follow their hand signals. Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, manual review will not record the red light violation. Even if recorded, drivers can apply for reconsideration with the traffic police.
14
1
Share

How many times can you participate in the 12123 license plate lottery?

12123 license plate lottery allows two attempts. Below are the two methods for selecting license plate numbers on the 12123 platform: Internet random method: Each attempt presents 10 numbers, and you can choose one from them. You have a total of 5 opportunities, and typically people use all 5 chances to ensure they get a satisfactory license plate number. Internet self-editing method: You can create your own license plate number and verify its availability. You have a total of 20 verification opportunities. Regardless of the number you get, it's important to carefully consider whether you truly need it.
8
0
Share

Symptoms of a Dead Car Battery?

Dimming vehicle lights, weak horn sounds, and sluggish engine starts are signs of a dead battery. Methods to handle a dead battery: 1. Jump-starting: Since the vehicle itself is a platform that uses and charges electricity simultaneously, jump-starting can be used to recharge the battery. After jump-starting, driving for two to three hours under normal conditions should restore the battery's charge. 2. Using a battery charger: For vehicles parked for extended periods, using a battery charger to restore the battery's charge is a good method. However, it's important to note that operating a battery charger requires caution, as improper use may damage the battery.
5
2
Share

What is the difference between gear oil 75w90 and 80w90?

75w-90 and 80W-90 gear oils differ only in viscosity. Below are the viscosity specifications for these two gear oils: 75w-90 viscosity: The kinematic viscosity of 75w-90 gear oil at 100°C is 4.1mm2·s, and the maximum temperature to reach 150Pa·s is -40°C. 80W-90 viscosity: The kinematic viscosity of 80W-90 gear oil at 100°C is 7.0mm2·s, and the maximum temperature to reach 150Pa·s is -26°C.
15
3
Share

How to Distinguish Between China IV and China V Vehicle Standards?

The methods to distinguish between China IV and China V vehicle standards are: 1. Check the corresponding standard number on the vehicle conformity certificate. The emission standard number for China IV is GB18352.32005, and for China V is GB18352.52013; 2. Check the environmental information accompanying the vehicle list; 3. Check the posted vehicle fuel consumption label; 4. Check the vehicle qualification certificate; 5. Query the vehicle's emission standard on the Motor Vehicle Environmental Protection Website. Vehicle emission standards refer to the regulations on the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and carbon smoke emitted from vehicle exhaust.
9
5
Share

What is the passing score for the driving test?

For Theory Test (Subject 1), a score of 90 is required to pass. The passing criteria for Practical Tests (Subject 2 and Subject 3) are more complex. Here are the detailed passing standards: Subject 2: For applicants of large buses, tractors, city buses, medium buses, and large trucks, a score of 90 is required to pass. For other vehicle types, a score of 80 is sufficient. Subject 3: Similarly, for applicants of large buses, tractors, city buses, medium buses, and large trucks, a score of 90 is required to pass. For other vehicle types, a score of 80 is sufficient.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.