What Causes the Interior of Car Windows to Always Be Foggy?

2 Answers
SanFinley
07/24/25 1:09am
Car windows always being foggy on the inside is due to poor quality window film or improper installation. Below are the specific functions of car window film: 1. Good Privacy: Generally, car window film is one-way, which can protect the owner's privacy, but it requires the owner to carefully choose the window film. 2. Anti-Explosion Effect: In case of an accident, the glass with window film will stick together when shattered, preventing the glass from splattering, thus protecting the passengers. 3. Thermal Insulation: High-quality car window film can provide thermal insulation. In summer, it can effectively control the rise of temperature inside the car, and in winter, it can suppress the dissipation of heat inside the car, maintaining the interior temperature and creating a comfortable driving environment for the owner.
Was this review help?
17
3
Share
VanTheo
08/10/25 8:52pm
When my car windows keep fogging up inside, I've figured out it's mainly due to excessive moisture in the vehicle. For instance, on rainy days or when passengers bring rainwater inside, the humidity in the air tends to condense on the glass, causing fog. This is also common when there's a significant temperature difference, such as using cold AC in summer or heating in winter—the temperature contrast between inside and outside the car causes moisture to accumulate. Additionally, if the AC system isn't set to external circulation, moisture can't escape, leading to issues. Over time, a greasy film might even form on the glass because of smoking while driving or eating in the car, with residues attracting moisture. For prevention, I usually open the windows for a few minutes to ventilate when parking or use the AC's defrost mode. Keeping a dehumidifier bag inside the car is also quite effective, especially during humid seasons. Foggy windows seriously compromise driving safety—poor visibility can lead to accidents—so spending a few minutes each morning to clear them ensures a clear view.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

What are the reasons for reduced engine power in Buick vehicles?

Buick engine power reduction can be attributed to: 1. Poor fuel quality and fuel line blockages; 2. Engine overheating. Taking the 2021 Buick GL8 as an example, its body dimensions are: length 5238mm, width 1878mm, height 1776mm, wheelbase 3088mm, fuel tank capacity 66L, and trunk capacity 475L. The 2021 Buick GL8 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 237PS, maximum torque of 350Nm, and maximum power of 174kW, paired with a 9-speed automatic transmission.
12
4
Share

What happens if you use 92 octane gasoline in a Volkswagen CC?

According to the official vehicle manual recommendation, the Volkswagen CC should use 95 octane gasoline. In addition to checking the suitable gasoline grade in the vehicle manual, you can also find it marked on the fuel tank cap of the Volkswagen CC. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade. High compression ratio engines can still be tuned to use lower octane gasoline because factors other than compression ratio, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If you occasionally use the wrong gasoline grade in a Volkswagen CC, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane number may alter the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, with the practical effect being poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane number is significantly lower, the reduced ignition point may cause premature ignition during the compression stroke. If combustion occurs before the spark plug ignites, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it may only increase noise without obvious engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
16
4
Share

What is the method to start a Bestune X40 when the key fob battery is dead?

The method to start a Bestune X40 when the key fob battery is dead is: 1. Remove the separate key equipped on the remote key fob; 2. Insert the key into the hidden keyhole under the steering wheel to start the vehicle. Taking the 2019 Bestune X40 as an example, its body structure is a 5-door, 5-seat SUV with body dimensions of: length 4310mm, width 1780mm, height 1680mm, wheelbase of 2600mm, fuel tank capacity of 50L, and curb weight of 1325kg. The 2019 Bestune X40 features a MacPherson strut front suspension and a torsion beam rear suspension, powered by a 1.6L naturally aspirated engine with a maximum horsepower of 114PS, maximum power of 84kW, and maximum torque of 115Nm.
4
0
Share

What are the reasons why a Mercedes-Benz has power but cannot start?

Mercedes-Benz has power but cannot start due to the following reasons: 1. The battery is dead; 2. The spark plugs cannot ignite; 3. There is a fault in the starting circuit. Taking the 2020 Mercedes-Benz A-Class as an example, it belongs to the compact car category, with body dimensions of: length 4622mm, width 1796mm, height 1454mm, wheelbase 2789mm, fuel tank capacity 43l, and trunk capacity 390l. The 2020 Mercedes-Benz A-Class is equipped with a 1.3t turbocharged engine, with a maximum horsepower of 136ps, maximum power of 100kw, maximum torque of 200nm, and is paired with a 7-speed dual-clutch transmission.
13
2
Share

How to Turn On the Ambient Lights in Lynk & Co 03?

To turn on the ambient lights in Lynk & Co 03, follow these steps: 1. Tap the settings on the central control screen; 2. After entering the system settings, switch to the vehicle tab; 3. Click on basic vehicle settings and find the lighting settings; 5. Select and tap on interior lights; 6. Turn on the ambient lights. The Lynk & Co 03 is a compact car with the following dimensions: length 4639mm, width 1840mm, height 1460mm, wheelbase 2730mm, front and rear track 1597mm, fuel tank capacity 50l, trunk capacity 431l, and curb weight 1512kg. The Lynk & Co 03 features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5T turbocharged engine that delivers a maximum horsepower of 156PS, maximum power of 115kW, and maximum torque of 245Nm, paired with a 6-speed manual transmission.
1
5
Share

What does the mode button on the car mean?

The mode button on the car refers to the mode function, used to switch multimedia modes. The functional buttons in a car are categorized as follows: 1. 'mute' is the mute button, controlling the mute mode of multimedia; 2. 'gps' is the locator, used for vehicle positioning and tracking, playback of driving routes, electronic fencing, and fuel monitoring; 3. 'set' with an exclamation mark is the tire pressure monitoring button, which will alert immediately if the tire pressure is insufficient. The 'ebp' in the car refers to the fuel-saving switch, designed to help drivers save more fuel during daily use, thereby improving overall fuel economy. The 'ebp' in the car refers to the fuel-saving switch, designed to help drivers save more fuel during daily use, thereby improving overall fuel economy.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.