What causes the inability to accelerate the throttle right after starting the car?

1 Answers
VanKendra
07/30/25 6:35am
Here are the reasons why the throttle cannot be accelerated right after starting the car: 1. Incorrect valve timing, such as poor sealing of intake and exhaust valves. 2. Poor performance, short circuit, or burnout of the fuel pump due to internal or wiring issues, leading to insufficient or stopped fuel supply. 3. Blockage in the intake system, such as the air filter or air flow meter, preventing proper combustion with fuel. 4. Internal engine faults, improper maintenance, premature or abnormal wear, cylinder pressure issues, or other potential problems. 5. Blockage in the fuel system, such as the injector, fuel filter, or poor fuel quality. 6. Abnormal spark plug ignition, aging components, exceeding normal lifespan, carbon deposits, or incorrect model selection (e.g., heat value). 7. Poor performance of the ignition system, such as spark plugs or high-voltage wires.
Was this review help?
17
2
Share
More Forum Discussions

What is the fuel tank capacity of the Ouliv?

The fuel tank capacity of the Ouliv is 44 liters, with each gauge segment representing approximately 4.5 liters, allowing for a speed of 70 km/h, making it convenient and efficient. Warning when the Ouliv's fuel tank is running low: There is a warning light to indicate low fuel levels. Hazards of overfilling the car's fuel tank: Fuel leakage can easily cause fires, especially in hot summer months, due to thermal expansion. If the tank is overfilled, fuel may overflow from the vent hole. Blocking the vent hole can create negative pressure inside the tank, leading to poor fuel supply or even a complete stoppage. Damage to the carbon canister: if the tank is overfilled, liquid gasoline instead of vapor may enter the carbon canister, causing damage. Gasoline evaporation can be carcinogenic: the components of gasoline vapor have been confirmed to contain carcinogens such as benzene, which over time can harm passengers' health.
5
4
Share

What are the classic colors of BMW?

BMW's classic colors include Mineral White, Cashmere Silver, Sapphire Black, Carbon Black, Quantum Blue, and Deep Red. Mineral White: White cars, due to their high brightness, often give a more majestic visual impression, so many car owners choose white paint to make the vehicle appear wider visually. Cashmere Silver: Cashmere Silver is a very classic color for the BMW 5 Series. Since few models on the market use a similar color scheme, this color has very high recognition. Additionally, because the silver paint makes the car look both majestic and understated, it is favored by many middle-aged consumers. Sapphire Black: Sapphire Black is BMW's traditional black. A black body can make the BMW 5 Series appear more solemn. As a mid-to-large-sized sedan, the black paint not only highlights a low-key and steady demeanor but also maintains a sense of mystery, making this color popular among many consumers.
8
4
Share

Are the Outlander transmission and the X-Trail transmission the same?

The transmissions of the Outlander and the X-Trail are not the same. Manufacturers of the Outlander transmission and the X-Trail transmission: The Outlander uses a transmission manufactured by Japan's Jatco, featuring the latest CVT8 technology. In contrast, the X-Trail is equipped with Nissan's advanced XTRONIC CVT intelligent continuously variable transmission. The Outlander adjusts the transmission ratio to expand the range of torque and speed variations at the drive wheels, adapting to frequently changing driving conditions while ensuring the engine operates under favorable conditions. It also allows the vehicle to reverse without changing the engine's rotation direction and enables the engine to start, idle, and facilitate gear shifts or power output by disengaging the transmission. Features of the Outlander and X-Trail: They offer a wide transmission range and smooth acceleration performance. The transmission ratio range reaches 8.7, and the transmission has been used for many years, having been tested and recognized by the market.
18
1
Share

How to Drive Curves Without Crossing the Line?

Methods to drive curves without crossing the line are as follows: grasp the timing of driving, control the vehicle's speed, use the clutch and brake to regulate speed, and stay close to the right curve before entering a turn to avoid crossing the line. Relevant information about curve driving is as follows: 1. Curve driving is a key assessment point in Subject 2 of the driver's test, commonly known as the S-curve. The test requires the vehicle to drive on an S-shaped road of specified width without pressing the edge lines, with smooth and flexible steering. 2. The assessment evaluates the driver's ability to maneuver the steering and control the vehicle during curve driving. The goal is to develop the driver's skill in steering application and mastery of wheel trajectory.
9
1
Share

Where is the handbrake located on the Mercedes-Benz SLK?

The handbrake of the Mercedes-Benz SLK is located below the left side of the steering wheel. There is no need to manually operate the handbrake; simply press the brake pedal firmly, and you will see "HOLD" displayed on the center console, which indicates the parking brake (handbrake) is engaged. The vehicle will automatically engage the parking brake when the engine is turned off and the door is closed. Function of the car handbrake: The parking brake, also known as the handbrake, provides resistance when the car is parked to prevent it from rolling. How to use the car handbrake: The parking brake, whether it's a handbrake or the parking gear in an automatic transmission, locks the drive shaft or rear wheels. The force of the parking brake is much weaker than that of the service brake, and it only needs to prevent the car from rolling when parked on a slope.
20
1
Share

What to Do When the Vehicle Fan Doesn't Rotate?

Reasons why the vehicle fan doesn't rotate include: 1. The car's water temperature hasn't reached the required level: The fan will only start rotating normally when the internal water temperature reaches the appropriate level. If the temperature is too low, the radiator fan won't rotate. Solution: Inspect and repair the car's engine. 2. Relay failure: If the water temperature meets the requirement but the car's radiator fan still doesn't work, the issue might be with the fan's relay. A faulty relay will prevent the radiator fan from operating. Solution: Replace the damaged relay. 3. Thermostat switch malfunction: Any issues with the thermostat switch can also affect the operation of the car's radiator fan. Solution: Replace the damaged thermostat switch.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.