What causes the idle vibration in Audi A6L 3.0?

1 Answers
MacAdeline
07/30/25 7:06am
Audi A6L idle vibration may be caused by the following reasons: Severe engine carbon deposits: Engine carbon deposits are the main cause of car vibration. When there is excessive carbon buildup inside the engine, the gasoline injected by the fuel injector during cold starts will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts, which can easily cause vibration. Ignition system failure: Excessive carbon buildup on the spark plugs or an overly large ignition gap can lead to ignition failure. Oil pressure issues: Abnormal fuel pump supply pressure or incorrect readings from the intake pressure sensor can cause poor fuel pump performance, leading to body vibration.
Was this review help?
6
3
Share
More Forum Discussions

How Often Should Engine Wiring Harness Protection Be Maintained?

Engine wiring harness protection should be maintained once a year after 3 years of use. Hazards of Engine Wiring Harness Failure: Long-term exposure to high temperatures in the engine compartment can cause the wiring harness surface to crack and peel, exposing wires and leading to electrical leakage. The wiring harness connectors may oxidize and corrode due to moisture and impurities in the engine compartment, or become loose from vibrations, resulting in poor contact. The most severe consequence of wiring harness aging is vehicle self-ignition. Engine Wiring Harness Maintenance: Regular wiring harness maintenance is essential. Wiring harness maintenance typically involves using a wiring harness protector. Its working principle is to form a protective film on the engine wires/battery terminals and harness surface, isolating moisture and preventing oxidation. Since the spray itself has high-voltage resistance and insulation properties, it can also delay the aging and cracking of rubber and plastic pipes in the engine compartment, preventing electrical leakage caused by harness aging. Additionally, the applied protective film is less prone to dust accumulation, making it easy to wipe and maintain engine compartment cleanliness for extended periods.
10
2
Share

How much speeding is allowed in highway section speed measurement?

Highway section speed measurement allows exceeding the prescribed speed limit by 10%. The following are the penalty regulations for section speed measurement: 1. If the speed exceeds the prescribed speed limit by less than 10%, a warning will be issued. 2. On roads with a speed limit below 50 km/h, if the speed exceeds the prescribed speed limit by more than 10% but less than 20%, a fine of 50 yuan will be imposed. 3. If the speed exceeds the prescribed speed limit by more than 20% but less than 50%, a fine of 100 yuan will be imposed; if the speed exceeds the prescribed speed limit by more than 50% but less than 70%, a fine of 300 yuan will be imposed. 4. If the speed exceeds the prescribed speed limit by 70%, a fine of 500 yuan will be imposed. 5. On roads with a speed limit between 50 km/h and 80 km/h, if the speed exceeds the prescribed speed limit by more than 10% but less than 20%, a fine of 100 yuan will be imposed.
13
3
Share

What is the appropriate tire pressure for the front and rear tires of the X-Trail?

The appropriate tire pressure for the front and rear tires of the X-Trail is between 2.2 and 2.5 bar. When the load is light, the tire pressure should be between 2.2 and 2.4 bar, while when fully loaded with passengers, the pressure can reach 2.4 to 2.5 bar. In winter, the tire pressure can be slightly increased, but it is recommended not to exceed 2.8 bar. In summer, the tire pressure should be reduced by 0.1 to 0.2 bar. In terms of body dimensions, the X-Trail measures 4675 mm in length, 1820 mm in width, and 1722 mm in height, with a wheelbase of 2706 mm. For the interior, the X-Trail is equipped with advanced technologies such as a digital 6-disc high-fidelity theater CD plus audio sound system, intelligent remote key system, intelligent voice navigation system, ASCD cruise control system, rearview camera, side-view system, multimedia entertainment system, anti-glare interior rearview mirror, external temperature display, and intermittent multi-level adjustable front wipers.
10
5
Share

What is SAE 15W40 engine oil?

SAE stands for the classification by the Society of Automotive Engineers; 15 represents viscosity, 40 indicates suitable temperature; the symbol W stands for Winter. Below is the relevant introduction to engine oil: 1. Winter oil grades: The winter oil grades under SAE lubricant viscosity classification are: 0W, 5W, 10W, 15W, 20W, 25W. The symbol W stands for Winter, and the smaller the number before W, the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the minimum applicable temperature. 2. Summer oil grades: The summer oil grades under SAE lubricant viscosity classification are: 20, 30, 40, 50. The larger the number, the higher the viscosity and the higher the maximum applicable temperature. 3. All-season oil grades: The all-season oil grades under SAE lubricant viscosity classification are: 5W-20, 5W-30, 5W-40, 5W-50, 10W-20, 10W-30, 10W-40, 10W-50, 15W-20, 15W-30, 15W-40, 15W-50, 20W-20, 20W-30, 20W-40, 20W-50.
14
5
Share

What Happens If a Car Is Not Scrapped?

Consequences of not scrapping a car: 1. Basis for vehicle confiscation. 2. Basis for fines and license revocation. 3. Basis for not being able to obtain a new license within 2 years after revocation. Below is the car scrapping process: 1. The vehicle owner must bring their ID, vehicle registration certificate, vehicle license, and license plate to the vehicle dismantling factory's business department to fill out the "Application for Vehicle Suspension, Resumption/Cancellation of Registration." 2. Apply at the registration acceptance counter, where a "Vehicle Scrapping Notice" will be issued for vehicles that have reached the scrapping age. For vehicles that have not reached the scrapping age, the vehicle inspection counter will determine if they meet the scrapping standards and issue a "Vehicle Scrapping Notice." 3. The owner selects a qualified recycling company to dismantle the vehicle and submits the "Notice." 4. The recycling company verifies the "Notice," dismantles the vehicle, and takes photos. The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. 5. The owner submits the "Change Form," "XX Province Vehicle Renewal Technical Appraisal Form," "Scrapped Vehicle Recycling Certificate," and dismantling photos to the vehicle inspection counter for verification and signature. The license and documents are then recycled, and the scrapping registration is processed according to regulations.
2
5
Share

Does the original three-way catalytic converter have a designated code?

Original three-way catalytic converters all have designated codes, as original vehicle parts are strictly selected, installed, and coded. Composition of the three-way catalytic converter: The three-way catalytic converter generally consists of four parts: the shell, vibration damping layer, carrier, and catalyst coating. Shell: Made of stainless steel to prevent oxide scale from falling off, which could cause blockage of the carrier. Vibration damping layer: Composed of gaskets or wire mesh pads, it serves to seal, insulate, and fix the carrier. To protect the carrier from damage due to vibration, thermal deformation, and other factors, the gasket is made of expanded mica and aluminum silicate fiber, bonded with adhesive. Carrier: Made of honeycomb-shaped ceramic material, though many also use metal (including stainless steel) materials. Catalyst: Composed of precious metals such as platinum, rhodium, and palladium, sprayed onto the carrier to form the purifying agent. Lifespan of the three-way catalytic converter: The lifespan of a three-way catalytic converter is generally between 80,000 to 100,000 kilometers. The specific lifespan depends on the vehicle's usage conditions and is also related to the quality of fuel used and the driving environment.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.