What Causes the Idle Noise That Disappears When Accelerating?

What are the symptoms of a faulty oil passage plate?

The poor oil flow in a car can cause unstable engine idle, weak acceleration, and traffic congestion during driving. The following is an introduction to the oil passage plate: 1. System function: To achieve the functional control of the above system, it ultimately needs to be reflected in controlling the speed of the turbine. This involves controlling the opening of the turbine's stationary blades, which is accomplished through an electro-hydraulic position servo system. The precision and error of the control system directly affect the control of various stages in the TRT system. Therefore, the importance and role of this system in the TRT are significant. 2. System composition: The system consists of three main parts: the hydraulic control unit, the servo cylinder, and the power oil station. The hydraulic control unit includes the speed control valve unit and the stationary blade control unit. Each unit is composed of an electro-hydraulic servo valve, an electric solenoid valve, a quick-closing solenoid valve, an oil passage block, and a base. The servo cylinder has a double-piston rod structure with minimal friction and excellent sealing performance. The power oil station consists of an oil tank, a variable displacement oil pump, an oil filter, a cooler, pipeline valves, and detector gauges.

9

2

Share

Are Shanghai GM and SAIC-GM the same?

Shanghai GM and SAIC-GM are the same entity. Shanghai GM was the former name, which was changed to SAIC-GM in 2015. The new name highlights the cooperative relationship between SAIC and GM, while the old name merely indicated that General Motors China was registered in Shanghai. Shanghai GM was established on June 12, 1997, as a joint venture between SAIC Motor Corporation Limited and General Motors Company. Relevant information about joint venture vehicles is as follows: 1. Introduction: A project jointly established by Chinese and foreign investors. The Chinese side contributes by providing land and factory usage rights, as well as capital, while the foreign investor provides the brand, technology, capital, talent, etc. Joint venture vehicles are the products of such collaborations. Foreign partners provide technology, talent, and brands for domestic assembly, but the core technology remains under foreign control. 2. Joint venture brands under the FAW Group include: FAW-Volkswagen, FAW-Audi, FAW-Mazda (all produced in Changchun, Jilin), and FAW-Toyota (produced in Changchun, Jilin; Tianjin; and Chengdu, Sichuan).

20

4

Share

How to Adjust the Rearview Mirror of an Audi?

Audi's rearview mirror adjustment method: The adjustment area is located on the door panel on the left side of the driver's seat. There is a small knob in front of the window lift buttons. Turn it to 'L' to adjust the left rearview mirror up, down, left, or right, and turn it to 'R' to adjust the right rearview mirror up, down, left, or right, which is very convenient. If you want to adjust the central rearview mirror inside the car, you can manually adjust it to the desired position. Most cars currently on the market have an automatic folding function for the rearview mirrors. When the car is turned off and locked, the rearview mirrors will automatically fold; when the car is started, the rearview mirrors will automatically unfold. Some cars' rearview mirrors are also equipped with an automatic tilt-down function. When the car is shifted into reverse gear, the rearview mirrors will automatically tilt down to a certain angle, making it easier for the driver to observe the rear wheels and reverse better. Audi is a luxury car brand under the Volkswagen Group's subsidiary Audi AG, representing high technical standards, quality benchmarks, innovation capabilities, and classic car models.

4

Share

Can You Still Drive After Smelling Burning Due to Forgetting to Release the Handbrake?

Can You Still Drive After Smelling Burning Due to Forgetting to Release the Handbrake? You can still drive after forgetting to release the handbrake and smelling burning, but it is not recommended to continue driving. Here are the relevant details: 1. Impact: Driving without releasing the handbrake has a significant impact on the car. The smell of burning indicates that the brake pads have already been worn out. If you drive with the handbrake engaged, you will clearly feel symptoms such as slow acceleration, noticeable jerking, and high engine RPM. 2. Solution: If you forget to release the handbrake while driving and smell burning, the driver should immediately slow down, then release the handbrake and wait for the car to cool down before continuing to drive. 3. Handbrake: The professional term for the handbrake is the auxiliary brake. Unlike the principle of the main brake, it uses a steel cable connected to the rear brake shoes to brake the car.

18

3

Share

What Causes the Tire Pressure Light to Keep Flashing?

Here are the reasons why the tire pressure light keeps flashing: 1. The tire pressure monitoring light may illuminate due to a punctured tire, which usually causes a very slow air leak. In such cases, it might be difficult to immediately identify which tire is affected. You can use a tire pressure gauge to measure the pressure. If the tire is underinflated, inflate it to the proper level and then observe the tire pressure warning light. 2. Sometimes, the tire pressure monitoring light comes on due to overinflation. According to international standards, the recommended inflation pressure for passenger car tires is as follows: standard tires: 2.4 to 2.5 bar; reinforced tires: 2.8 to 2.9 bar; maximum pressure should not exceed 3.5 bar. 3. The tire pressure monitoring light may also illuminate after prolonged driving with low tire pressure. This usually occurs when one tire is significantly underinflated, causing the tire temperature to rise during high-speed driving, which in turn increases the tire pressure. In such cases, you should stop and rest or replace the tire with a spare one as soon as possible.

17

4

Share

How long is the range of BYD Dolphin new energy vehicle?

BYD Dolphin has two versions with ranges of 301km and 405km. Factors affecting the range of electric vehicles: 1. Charging equipment: The quality of charging equipment will affect the energy replenishment and output of the electric vehicle battery, thereby affecting the range. 2. Tire pressure: Like gasoline vehicles, low tire pressure will increase the rolling resistance and lateral steering resistance of the tires, causing the vehicle's power to be quickly consumed and affecting the range. 3. Vehicle overload: Overloading an electric vehicle increases the vehicle's weight, resulting in greater battery output, faster power consumption, and reduced range. 4. Sudden stops and starts: Sudden stops or starts mean activating the motor in a very short time and consuming more electricity for this purpose, which will also shorten the motor's service life. It is recommended that after starting the electric vehicle, you should drive at a constant speed for a certain distance before accelerating. While driving, control the speed to keep the battery in a stable working state, which can ensure the range.

13

5

Share

What Causes the Idle Noise That Disappears When Accelerating?

What are the symptoms of a faulty oil passage plate?

Are Shanghai GM and SAIC-GM the same?

How to Adjust the Rearview Mirror of an Audi?

Can You Still Drive After Smelling Burning Due to Forgetting to Release the Handbrake?

What Causes the Tire Pressure Light to Keep Flashing?

How long is the range of BYD Dolphin new energy vehicle?

Where is the cigarette lighter located in the BMW X1?

Which gear should be used for a steep slope with a manual-automatic transmission?

What causes the handbrake light of the Beidou Star to stay on?

What does Porsche 971 mean?