What Causes the Hot Air Conditioner to Stop Blowing Air?

1 Answers
DeKarter
07/30/25 3:47am
Reasons why the hot air conditioner stops blowing air: 1. Poor operation of the heating control mechanism; 2. Fault in the engine cooling system. Methods to determine the cause of insufficient car heating: Check the temperature of the two inlet pipes of the heating radiator. If both pipes are sufficiently hot, it indicates an issue with the air volume control mechanism. If both pipes are cold, or one is hot and the other is cold, it suggests a problem with the cooling system. The car air conditioning system mainly consists of components such as the compressor, condenser, evaporator, expansion valve, dryer reservoir, and pipelines. The car air conditioning system provides a comfortable environment for passengers, reduces travel fatigue, creates favorable working conditions for the driver, and serves as an essential ventilation device for ensuring safe driving.
Was this review help?
5
1
Share
More Forum Discussions

What to Do If Your Vehicle Stalls at a Railroad Crossing

Quickly attempt to restart the engine. If the vehicle cannot be restarted, immediately try to move it off the tracks. If the vehicle cannot be moved off the tracks, occupants should exit the vehicle and call the authorities immediately.
20
2
Share

How to Choose the Right Section for Overtaking While Driving?

When driving a car, choose sections for overtaking where [visibility is good], [there is no oncoming traffic], [the road is free of obstacles], and [the road is wide and straight] to ensure safe driving. However, in real-world conditions, always observe the road situation first and ensure safety before overtaking.
11
0
Share

What should you do when encountering a stop signal while driving a motor vehicle?

When encountering a stop signal, vehicles should stop in sequence behind the stop line. If there is no stop line, stop beyond the intersection. When making a right turn and encountering a vehicle in the same lane waiting for the signal to proceed, stop and wait in sequence.
3
2
Share

How to Drive at Sharp Turns on the Road?

Sharp turns on the road will always have warning signs in advance, so it is necessary to gradually reduce speed. If the turn is very short, it is recommended to keep your foot on the brake and let the car pass at idle speed without accelerating. Maintain a certain distance from the vehicle in front to avoid rear-end collisions caused by sudden braking.
10
2
Share

How to Use Lights When Preparing to Exit a Roundabout While Driving a Motor Vehicle?

You should turn on the right turn signal in advance, confirm safety, then start changing lanes from the inner lane towards the outside of the roundabout, and finally exit the roundabout. When turning right, changing lanes to the right, returning to the original lane after overtaking, or parking by the roadside, the right turn signal should be turned on in advance.
17
2
Share

How to Operate When Driving a Motor Vehicle Through a Short and Steep Uphill Ramp?

When passing through a short and steep uphill ramp, downshift in advance at the bottom of the slope and accelerate to climb the slope. This ensures the vehicle has sufficient power to climb the slope, avoiding mid-slope downshifting or stalling. When approaching the top of the slope, release the accelerator pedal in advance and use inertia to pass over the crest.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.