What causes the Honda CR-V body resonance at 700 RPM?

1 Answers
MarcusRose
07/30/25 7:19am
The reasons for the Honda CR-V body resonance at 700 RPM: incorrect tire dynamic balance parameters, clutch or torque converter failure. Below are the specific explanations for the causes: Incorrect tire dynamic balance parameters: The concept of "dynamic balance" for tires refers to the smooth operation of high-speed rotating wheels, while imbalance can cause wheel wobble during operation. The reason is that with the wheel hub cover as the center, there is a difference in mass (weight) at symmetrical positions on a certain diameter line of the wheel. Clutch or torque converter failure: Clutch slippage causes vibration during cruise driving, but no vibration during deceleration coasting. The clutch friction disc and pressure plate are wear parts, and if severely worn or with design defects, they may cause vibration or jerking during high-speed driving.
Was this review help?
10
3
Share
More Forum Discussions

What is the method for matching the Mazda 6 remote control?

The method for matching the Mazda 6 remote control is as follows: Open the car door, use the key to turn the ignition on and off three times, then open and close the door three times to enter the learning mode. Press any button on the remote control twice, then remove the key to complete the matching process. The car's remote control, also known as the smart key, mainly consists of a transmitter, a remote central control module, a driving authorization system control module, three receivers, and related wiring harnesses. The Mazda 6 is a model under FAW Mazda, with body dimensions of 4670mm in length, 1780mm in width, and 1435mm in height, and a wheelbase of 2675mm. In terms of configuration, the Mazda 6 is equipped with an anti-lock braking system (ABS) and an electronic brake-force distribution (EBD) system, significantly improving braking performance. During emergency braking, the FBD system ensures reasonable brake force distribution, greatly reducing the braking distance. Additionally, it is equipped with front dual airbags, side airbags, and side curtain airbags, enhancing both active and passive safety.
13
3
Share

What are the reasons for the heavy steering of Volkswagen Santana Vista?

Reasons for the heavy steering of Volkswagen Santana Vista: Insufficient power steering fluid: The power source for a car's movement is the power steering fluid, so if the fluid is insufficient, the car will have difficulty moving forward, let alone turning to change direction. Contaminated power steering fluid: If the vehicle's power steering fluid is mixed with unclean gases or impurities, the fluid cannot function properly, leading to difficulty in turning the steering wheel. Issues with the power steering pump: The steering wheel is closely related to the power steering pump. If there are problems such as poor electrical contact or other issues within the power steering system, the steering wheel will become heavy. Low tire pressure: When the car's tire pressure is too low, the steering wheel will become heavier, and it may even lead to a tire blowout. Therefore, if you feel the steering wheel becoming heavy, you should check the car's tire pressure and power steering fluid.
9
0
Share

What to Do When Your Car Won't Start in Cold Weather?

Here are the reasons why a car won't start in cold weather and their solutions: 1. Battery power issue. Due to shedding of battery plates or incorrect acid-base balance ratio, the battery may not hold enough charge. Solution: Regularly check the battery. If the battery has been completely drained more than twice, it is recommended to replace it with a new one. 2. Carbon deposits. Long-term driving in low temperatures, using low-quality gasoline, prolonged vehicle use, or burning engine oil can easily lead to carbon buildup. Solution: Use professional gasoline additives designed to clean carbon deposits. 3. Frozen exhaust pipe or excessive carbon deposits on the valves. Solution: Drive on the highway every weekend during winter to use strong exhaust force to promptly remove accumulated water in the exhaust pipe. 4. Restricted engine oil flow. Solution: Visit a specialized shop for professional winter maintenance and replace the engine oil with an appropriate type based on local conditions.
12
1
Share

How long should you drive after jump-starting a car to fully charge the battery?

After jump-starting, the vehicle should be driven for at least half an hour to ensure sufficient battery charge. The exact time required to fully recharge the battery depends on factors such as how much charge was initially transferred during the jump-start, the battery's storage capacity, and whether high-power electrical devices are being used in the vehicle. Precautions for jump-starting a car: Ensure the assisting vehicle's battery has sufficient charge; Check the voltage of the discharged battery to match it with the assisting vehicle's battery; Position both vehicles close enough for easy cable connection and inspect both batteries for leaks, cracks, or damage. Correct method for jump-starting: Connect positive to positive and negative to negative terminals. When disconnecting, remove the negative cable first, then the positive. If the car fails to start with a "clicking" sound, it indicates insufficient charge. If the vehicle still won't start after prolonged jump-starting, check if both batteries have matching power ratings and consider using a better-conducting cable.
19
0
Share

What Are the Reasons for Always Feeling Drowsy While Driving?

The main reasons for always feeling drowsy while driving include lack of sleep, weather and driving environment issues, and having a heavy lunch. Lack of sleep: The primary reason for feeling drowsy while driving is insufficient rest and poor mental state. Many people have the habit of staying up late, and most do not get the recommended 7-8 hours of sleep. Inadequate sleep can lead to drowsiness when driving to work the next morning. Weather and driving environment issues: Drowsiness while driving is more common in summer due to high temperatures and poor air circulation inside the car, especially in the afternoon when the body is naturally prone to drowsiness. Driving on monotonous highways can have a hypnotic effect, further intensifying the driver's sleepiness. Heavy lunch: Generally, people who are used to taking naps after lunch tend to feel drowsy at their usual nap time due to their biological clock. Additionally, after eating, the digestive system requires more blood, diverting it from other parts of the body, including the brain. This reduces blood flow and oxygen supply to the brain, leading to drowsiness.
4
1
Share

What is the reason why the car's water temperature hasn't risen after driving for an hour?

The reason why the car's water temperature hasn't risen after driving for an hour is that the thermostat is damaged and cannot close, causing the coolant to continuously circulate in the large loop, which rapidly lowers the engine's water temperature; the cooling fan is faulty and constantly running, causing the water temperature to drop quickly; or there is insufficient coolant. Below are the relevant details: Solutions: Check if there are issues with the cooling system, such as: whether the shutters are blocked, whether the fan blades are deformed, or whether the water temperature sensor and circuit are short-circuited. The thermostat can be removed and placed in water at different temperatures to observe its opening behavior. If it cannot open and close normally, the thermostat needs to be replaced. Hazards of low water temperature: It leads to incomplete fuel combustion, reducing the engine's efficiency; incomplete fuel combustion causes carbon buildup, increasing fuel consumption and polluting the environment; prolonged operation of the car at low temperatures accelerates wear and tear on the engine's internal components.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.