What Causes the High and Low Pressure of a Car's Air Conditioning to Be Equally High?

1 Answers
DeEvangeline
07/29/25 11:15pm
The reason for the high and low pressure of a car's air conditioning being equally high is insufficient refrigerant (Freon) in the AC lines or excessive addition of refrigerant oil, leading to a shortage of refrigerant. Here are the troubleshooting methods for car air conditioning: 1. Release excess refrigerant. 2. Replace the receiver-drier. 3. Perform a thorough vacuum and refill with refrigerant. 4. Clean or replace the condenser, and inspect the fan motor and its circuit. Compressor maintenance includes the following methods: 1. Check if the refrigerant is sufficient, measure the temperature difference between the inlet and outlet pipes of the drier, and inspect using a manifold pressure gauge. 2. Clean the air vents and remove dust and dirt inside the cabin. 3. Check if the refrigerant level in the AC system is normal. 4. Inspect the condition of the compressor belt.
Was this review help?
15
3
Share
More Forum Discussions

How many cylinders does the Jiaji engine have?

The 1.5T model of Jiaji has a three-cylinder engine, while the 1.8T model has a four-cylinder engine. The three-cylinder engine of Jiaji delivers a maximum horsepower of 177 hp, a maximum power of 130 kW, and a maximum torque of 255 Nm. The four-cylinder engine provides a maximum horsepower of 184 hp, a maximum power of 135 kW, and a maximum torque of 300 Nm. In terms of interior design, the silver-white metal-textured strip-shaped door handles on the Jiaji's doors are quite stylish. It is equipped with features such as an electronic gear shift lever, panoramic imaging, and a panoramic sunroof. For safety configurations, the Jiaji comes with multiple intelligent safety features including the ICC Intelligent Navigation System, Bosch Fully Automatic Parking System, RCW Rear Collision Warning, and RCTA Reverse Side Assist.
16
4
Share

How to use the Toyota RAV4 four-wheel drive?

Toyota RAV4 four-wheel drive usage method: The vehicle's four-wheel drive is an on-demand system, which automatically switches between four-wheel drive and front-wheel drive based on the vehicle's computer, without requiring manual adjustment. The car normally operates in two-wheel drive mode. When the onboard computer detects wheel slippage, it transfers power to the rear wheels. If the driving speed exceeds 40 kilometers per hour, the four-wheel drive will automatically disengage. There is a button on the center console to manually turn off the four-wheel drive system. The Toyota RAV4 is the base model in Toyota's compact multi-purpose off-road vehicle family, with dimensions of 4265 mm in length, 1785 mm in width, and 1705 mm in height, and a wheelbase of 2660 mm. In terms of suspension, the Toyota RAV4 features a MacPherson strut independent front suspension and an E-type multi-link independent rear suspension.
12
2
Share

How to Remove the Door of the Buick Excelle?

Steps to remove the door of the Buick Excelle: 1. First, remove the panel of the window regulator, which is usually fixed with clips. Pry it out slowly; 2. Disconnect the control wires, then remove the adjacent fixing screws and take off the door handle; 3. Pry off the fixed panel of the door switch. The door panel is secured with clips, so there are clips around the edges. Pry it open slowly, then disconnect the wiring connector on the interior panel. The Buick Excelle is a compact car under SAIC-GM Buick, with a length, width, and height of 4609 mm, 1798 mm, and 1464 mm respectively, and a wheelbase of 2640 mm. In terms of power, the Excelle is equipped with a naturally aspirated engine, delivering a maximum horsepower of 113 hp and a maximum power of 83 kW.
9
3
Share

What is the appropriate RPM for a manual transmission car?

Manual transmission cars are suitable at around 2000 RPM. The shifting RPM can generally be chosen between 1500 to 2500 RPM. If you want to save fuel from an economic perspective, you can shift at around 1500 to 1800 RPM. For lower gears, you can appropriately increase the shifting RPM to 2000 RPM. During the break-in period, it is recommended to lower the shifting RPM. If you want better performance in terms of power, you can shift at around 2000 to 2500 RPM. A manual transmission is a gear-shifting device used to change the speed and torque transmitted from the engine to the drive wheels. It allows the car to achieve different traction and speed under various conditions such as starting from a standstill, climbing hills, turning corners, and accelerating, while also keeping the engine operating within a more favorable range.
5
5
Share

Can ETC only be used for one car?

ETC can only be used for one car, but one card can be bound to multiple vehicles. According to the "Rules for the Use of Non-stop Rapid Transit System," when applying for an ETC card, the "ETC Service Deduction Authorization Form" must be filled out. When specifying the vehicles for payment binding, multiple vehicles can be listed. This means there is no limit to the number of vehicles that can be bound to a single ETC card for payment. ETC is a non-stop electronic toll collection system, also known as an automatic road toll system. It is specifically designed for toll roads, commonly found on highways, toll bridges or tunnels, and certain urban road sections to alleviate traffic congestion. ETC Deduction Principle: Highways have one or more ETC lanes. Through microwave short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, the system uses computer networking technology to settle payments with banks. This allows vehicles to pass through toll stations without stopping, based on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel, reduces noise and exhaust emissions by eliminating stops at toll stations; Reduces wear and tear: Saves costs by minimizing frequent starts and stops, reducing vehicle wear and fuel consumption; Improves efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC faster, more advanced, and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also set a target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles should reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will include promoting ETC for trucks and exploring deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments. This will provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC usage.
3
1
Share

How to cancel the ETC registered on WeChat?

Steps to cancel the ETC registered on WeChat: 1. Open WeChat and click on the search bar; 2. Enter "ETC Assistant" and click on the official account; 3. Follow the official account and click on "Service Center"; 4. Contact customer service and input "Cancel ETC"; 5. The system customer service will then reply; 6. Wait for the customer service to process the cancellation. ETC is an electronic toll collection system that allows vehicles to pass through toll stations without stopping. It uses a vehicle-mounted electronic tag installed on the windshield to communicate with the microwave antenna in the ETC lane at the toll station via dedicated short-range microwave communication. The system then processes the toll payment through computer networking technology with the bank, enabling vehicles to pay tolls without stopping at the toll booth.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.