···
Log in / Register

What causes the heavy steering wheel of the Arrizo GX?

3 Answers
DiMadeline
07/28/25 11:23pm
The reasons for the heavy steering wheel of the Arrizo GX: dirty or insufficient power steering fluid. The Arrizo GX uses a mechanical hydraulic power steering system, where the hydraulic pump is driven by the engine belt, and the steering fluid directly affects the steering wheel's heaviness. The Arrizo GX is a car produced by Chery. The dimensions of this model are 4700mm in length, 1825mm in width, and 1482mm in height, with a wheelbase of 2670mm. The Arrizo GX is equipped with a 1.5T engine, delivering a maximum power of 147 horsepower and a peak torque of 210 Nm, paired with a 5-speed manual transmission.
Was this review help?
13
0
Share
Wyatt
08/12/25 2:42am
I've been driving the Arrizo GX for over two years, and last month the steering wheel suddenly became extremely heavy, making it very strenuous to turn, almost like carrying a heavy load. There could be several reasons for this, such as a malfunction in the electric power steering system, incorrect sensor signals, or control module failure, all of which could lead to reduced power assistance. In terms of tires, insufficient tire pressure or uneven wear can increase friction resistance, making the steering wheel heavier. Additionally, loose suspension components or incorrect wheel alignment can cause an imbalance in the entire system. It's important to regularly check tire pressure and perform system diagnostics; spending a little money can prevent major troubles, otherwise, long-distance driving can be exhausting and dangerous.
Was this review help?
13
4
Share
Expand All
NevaehDella
10/01/25 5:38am
As a seasoned long-distance driver, I've encountered the issue of heavy steering with the Arrizo GX. It turned out to be severe wear in the mechanical parts of the steering column, which increased the effort required to operate it; or unstable power supply to the electric power steering system, such as from an aging battery or abnormal generator operation. Also, pay attention to road conditions—poor tire grip or uneven surfaces can make steering more strenuous. Regular maintenance is crucial. It's advisable to check tire pressure monthly and perform a wheel alignment annually. Safe driving relies on prevention, so don't wait for an accident to regret it.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

How to Install License Plate Screws on a Car?

To install license plate screws on a car, follow these steps: 1. After receiving the license plate, you will usually get two packs of professional screws for installation. Insert the screws into the holes by rotating them, making sure not to insert them upside down. 2. Take out the car license plate and position it correctly by hand, ensuring the left and right distances are as equal as possible for symmetry and aesthetics. Also, make sure the four screw holes on the license plate align with the four holes on the bumper. 3. Tighten the screws with a screwdriver, then gently press the anti-theft caps into place. These caps are one-time use and cannot be removed once pressed in.
5
2
Share

How to Use Car Air Conditioning Correctly?

Correct methods for using car air conditioning are: 1. Turn on the AC switch and adjust the air vent selection knob. When cooling, direct the vents upward; when heating, direct them downward. 2. Adjust the fan speed switch. At low speeds, set the fan to a low gear to avoid insufficient power generation and cooling. 3. Adjust the air recirculation mode. Upon entering the car, first open the windows for ventilation and activate the external circulation to expel hot air. Switch to internal circulation once the cabin temperature drops. 4. Adjust the temperature control knob. Car air conditioning refers to the climate control system installed in vehicles, which cools, heats, ventilates, and purifies the cabin air, providing a comfortable environment for passengers, reducing driver fatigue, and enhancing driving safety.
18
2
Share

How to Clean a Car Radiator?

Cleaning a car radiator involves the following steps: 1. Remove the front grille mesh, then dismantle the hood lock assembly in the middle to fully expose the condenser; 2. Use an air gun to blow away debris like fluff and loose dust—ideally, clean from inside the engine compartment outward if possible; 3. Rinse with water, preferably at a professional car wash facility for expert cleaning. The car radiator is a critical component of water-cooled engines, serving as a key part of the cooling circuit that absorbs heat from the engine block to prevent overheating.
19
4
Share

How Often Should CVT Fluid Be Changed?

CVT fluid should be changed every 3 years or 60,000 kilometers. Over time, the transmission fluid becomes dirty and its viscosity decreases, which compromises its ability to protect the transmission. This can lead to symptoms such as rough shifting, abnormal acceleration, increased noise, and in severe cases, premature transmission failure, shortening the transmission's lifespan. Continuously Variable Transmissions (CVTs) allow for a continuous change in the gear ratio, ensuring optimal matching between the drivetrain and engine conditions. This improves the vehicle's fuel efficiency and power performance while enhancing the driver's ease of operation and passenger comfort.
8
5
Share

Why won't the car start after being parked for 6 days?

If a car won't start after being parked for 6 days, it is likely due to insufficient battery power, excessive carbon buildup in the idle motor, intake tract, intake valves, and combustion chamber; or it could be caused by issues with the fuel injectors, such as leaks or excessive carbon deposits, leading to an overly lean air-fuel mixture during startup and preventing the engine from starting. It is advisable to promptly contact a 4S shop or repair shop for inspection and maintenance. Leaving a car unused for extended periods not only results in starting issues but also causes damage to the exterior paint. Long-term outdoor parking exposes the vehicle to wind, rain, and sunlight, and without regular maintenance, the paint surface can become corroded and oxidized. Therefore, when parking the vehicle for an extended time, it is recommended to cover it or park it in a cool, dry place, and perform regular maintenance.
14
5
Share

What are the basic components of a car body structure?

The basic structure of a car body consists of the body shell, doors, windows, front sheet metal components, interior and exterior trim parts, body accessories, seats, as well as ventilation, heating, air conditioning, and climate control systems. The body shell serves as the mounting foundation for all body components and typically refers to the rigid spatial structure formed by major load-bearing elements such as longitudinal beams, cross members, pillars, and their connected sheet metal parts. Doors are mounted on the body shell via hinges and feature complex structures, playing a crucial role in ensuring the functional performance of the vehicle body. These sheet metal components form the spaces that accommodate the engine, wheels, and other parts.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.