What Causes the Heavy Electronic Power Steering in BMW 5 Series?

1 Answers
EdwardAnn
07/24/25 10:33pm
The reasons for heavy car steering wheel can be multifaceted. The causes of a heavy steering wheel include: 1. Oil Leakage: For hydraulic power steering, check if the power steering fluid is insufficient or if there is any leakage. If the fluid is low, it needs to be replenished to the normal range. If the fluid level is adequate, check if the power steering pump belt is too loose. If it is, tighten the belt. Also, check if the fluid is too dirty, which can reduce its flowability. Generally, it should be replaced every 2 years or 60,000 kilometers. 2. Fuse: For electronic power steering, check if the fuse is blown and if there are any open circuits or short circuits to ground in the wiring. 3. Tire Pressure: Check the tire pressure, as underinflation can also cause the steering to become heavy, necessitating inflation.
Was this review help?
17
1
Share
More Forum Discussions

What does EV mean on a car?

EV on a car refers to the pure electric driving mode of hybrid vehicles, which is a mode driven by an electric motor. This mode is not available in conventional power vehicles (conventional power refers to gasoline or diesel vehicles). The EV mode is typically equipped in pure electric vehicles or hybrid vehicles, and EV also stands for Electric Vehicle, which is the abbreviation of Electric Vehicle. Hybrid vehicles use the electric motor for driving when starting the car, and the engine intervenes after reaching a certain speed, which greatly saves fuel. While the engine is working, it charges the battery, and some models even have a kinetic energy recovery system to improve charging efficiency. Currently, hybrid vehicles represent a relatively balanced car driving method between economy and range performance.
10
2
Share

What are the effects of changing from spark plug heat range 6 to 7?

The effects of changing from spark plug heat range 6 to 7 are as follows: 1. The higher the heat range number of a spark plug, the cooler it is. If a vehicle originally uses a heat range 6 product but switches to heat range 7, there may not be significant operational issues. However, if the car frequently operates at low speeds, it is more prone to spark plug carbon buildup. 2. The heat range of a spark plug actually refers to an indicator of its heat absorption and dissipation capabilities. The amount of heat the spark plug itself dissipates is called the heat range. Heat ranges include numbers from 1 to 9, where 1-3 are low heat ranges, 4-6 are medium heat ranges, and 7-9 are high heat ranges. Original equipment manufacturer (OEM) spark plugs typically come in heat ranges 5, 6, and 7. The higher the number, the cooler the spark plug and the better its heat dissipation. There isn't a definitive answer as to whether heat range 6 or 7 is superior; the most reasonable choice depends on matching the heat range to the overall condition of the car's engine. 3. There may be slight impacts on vehicle fuel consumption, engine knocking, or engine horsepower. If the spark plug is too cool, it can lead to higher fuel consumption and carbon buildup in the combustion chamber. If it is too hot, it can cause knocking, reduced power, or engine overheating. A higher heat range means faster heat dissipation, which can lower the spark plug temperature and cause carbon buildup at the ignition point, leading to misfires. Conversely, a low heat range with insufficient heat dissipation can raise the spark plug temperature, causing pre-ignition (knocking) and potentially damaging the spark plug's ceramic insulator or melting the electrodes. Therefore, the heat range of a spark plug should not be changed arbitrarily.
6
3
Share

What brand of tires does the Rapide use?

Aston Martin Rapide uses Bridgestone Potenza series high-performance tires. The front tire specification is 245/40R20, and the rear tire specification is 295/35R20. Here is some additional information: 1. Bridgestone tires are products of the Japanese company Bridgestone Corporation. They are now widely used in various car brands worldwide. 2. Bridgestone is the world's largest rubber manufacturing company. Bridgestone tires were first produced in Kurume City, Fukuoka Prefecture, Japan, in March 1931. Today, Bridgestone tires are used in vehicles from Guangzhou Honda, Tianjin FAW Toyota, Zhengzhou Nissan, Beijing Jeep, and many other Chinese automobile manufacturers. The company has production bases in 24 countries and regions globally, accounting for one-fourth of the world's total sales.
12
4
Share

Can a smart car run on the highway?

smart cars can run on the highway, but it is not recommended to drive at high speeds on the highway. The smart car has a lightweight and compact body, which makes it prone to accidents and hazards when driving at high speeds on the highway. If driving on the highway is necessary, it is recommended to keep the speed below 100km/h. Relevant information is as follows: 1. The smart car is equipped with a three-cylinder engine, with a maximum power of 109 horsepower (80kw) and a maximum torque of 170Nm. The official data indicates a top speed of 155km/h. 2. The dimensions of the smart car are 2695mm x 1663mm x 1542mm, with a wheelbase of only 1873mm, positioning it as a micro commuter car.
16
3
Share

What to Do When a Car Fuse Blows

When a car fuse blows, it needs to be replaced. Besides going to a repair shop for replacement, you can also replace the fuse yourself by following these steps: 1. Locate the fuse position based on your car model. Generally, the fuse box is near the battery. The fuse box is usually secured with clips, and some high-end models may have bolts. Carefully remove the box to access the fuse. 2. Carefully refer to the diagram to identify the fuse. Before removing the fuse, read the diagram carefully. It's usually easier to match the diagram on the side where the fuse is easily accessible. 3. Use tweezers to remove the fuse and replace it with a new one. The fuse box typically contains spare fuses, placed away from other fuses for easy identification. Use tweezers to remove the fuse and check if it has blown. If it has, replace it with the appropriate spare fuse.
15
3
Share

What is the difference between independent and non-independent suspension?

The difference between independent and non-independent suspension lies in their structure, as detailed below: 1. Independent suspension means that each side's wheel is individually mounted to the frame or body via an elastic suspension system. 2. Non-independent suspension means that both wheels are connected by an integrated frame, and the wheels along with the axle are mounted to the frame or body via an elastic suspension system. The advantages of non-independent suspension are as follows: 1. The left and right wheels are interconnected during bouncing, resulting in minimal changes in tire angle and reduced tire wear. 2. When the vehicle height is lowered, the wheel angle is less likely to change, maintaining consistent handling feel. 3. Simple construction, low manufacturing cost, and easy maintenance. The advantages of independent suspension are as follows: 1. Lightweight and improves wheel traction. 2. Lower engine position enhances driving stability. 3. Left and right wheels move independently, reducing body tilt and vibration.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.