What Causes the GLC's Abnormal Noise?

1 Answers
VivienneDella
07/25/25 2:18am
GLC abnormal noise may be caused by worn brake pads that need replacement or repair, or road bumps, or foreign objects in the brake pads. There are many possible reasons for abnormal noise. Here are some relevant details: 1. Causes of brake noise: Brake noise can be caused by excessive wear of the brake pads, resulting in metal-to-metal contact and noise. Alternatively, sand or dirt in the brake pads can also cause brake noise. It is recommended to check if the brake pads are excessively worn, if there is sand in the brake pads, and if the brake discs are deformed. 2. Issues with the brake discs and pads: Abnormal noise from the brake discs and pads can be caused by rust or hard spots, usually occurring when the vehicle first starts moving and improving after a few presses. Noise can also come from the suspension system and pressure bearings.
Was this review help?
18
1
Share
More Forum Discussions

What is the time interval for consecutive lane changes in Subject 3?

Continuous lane changes require an interval of about 10 seconds. When changing lanes, you need to turn on the turn signal for about 3 seconds. After changing lanes once, turn off the turn signal for about 3 seconds, and then turn it on again before you can change lanes once more. Precautions for consecutive lane changes in Subject 3: 1. First precaution: Avoid habitually releasing the throttle when changing lanes, which may cause gear disengagement; 2. Second precaution: Yield to vehicles in the lane you are merging into; 3. Third precaution: Do not change more than two lanes consecutively at once; 4. Fourth precaution: When vehicles from both the left and right lanes are merging into the same lane, the vehicle on the left must yield to the vehicle on the right.
10
2
Share

Is the Panamera equipped with a horizontally opposed engine?

The Panamera does not use a horizontally opposed engine. Here is an extended introduction: 1. Introduction to the Panamera: The Panamera is a large luxury sedan under the Porsche brand. This car does not use a horizontally opposed engine; instead, it is equipped with two types of engines: a 2.9-liter twin-turbocharged V6 engine and a 4.0-liter twin-turbocharged V8 engine. In fact, a horizontally opposed engine is also a type of V-engine, but the angle between the two rows of cylinders is 180 degrees. 2. Advantages of horizontally opposed engines: Horizontally opposed engines have a lower center of gravity, and using this type of engine can lower the overall vehicle's center of gravity. A lower center of gravity improves the car's handling and reduces body roll during cornering.
6
5
Share

What are the reasons for the malfunctioning of the Buick Excelle's auto start-stop system?

Here are the detailed explanations regarding the Buick Excelle's auto start-stop system: 1. Reasons for the malfunctioning of the Excelle's auto start-stop system. The auto start-stop function may not work due to a very low vehicle battery charge, excessively high temperature, brake system pressure dropping below a certain point, or excessively high or low external temperatures. 2. Auto start-stop failure. The auto start-stop may fail because the engine has not reached normal operating temperature, the auto air conditioning has not reached the preset temperature, the battery charge is insufficient, the steering wheel is turned after stopping, the vehicle is in emergency braking or reverse gear, or there is a fault in the auto start-stop system. This could be due to wiring issues or other reasons causing the start-stop system to malfunction. It is best to promptly visit a 4S shop for inspection and repair.
10
0
Share

What procedures are required to transfer the fourth subject back to the local area?

Students who need to transfer the fourth subject back to the local area only need to bring their ID card and photos to the local vehicle management office to complete the procedure. The following is a related introduction to the fourth subject examination: 1. Examination content: The fourth subject, also known as the theoretical examination for the fourth subject or the driver's theoretical examination, is part of the third subject. The third subject examination consists of two parts: besides the road test, there is an additional safety and civilization knowledge test, commonly known as the fourth subject, which assesses driving ethics. 2. Examination scope: Depending on the type of driving license being tested, 50 questions are proportionally selected from the corresponding question bank for the fourth subject examination. For small vehicle driving licenses, questions are selected from 1235 questions, and for large vehicle driving licenses, questions are also selected from 1235 questions, with each question worth 2 points.
19
4
Share

Choosing Uphill or Downhill for Overtaking in Mountainous Areas

Overtaking in mountainous areas should be done on uphill roads. Here are some relevant introductions about overtaking: 1. Definition of overtaking: Overtaking refers to the process where a rear vehicle changes lanes to the side behind the front vehicle, passes it, and then returns to the original lane. The lane typically used for overtaking is the inner lane, which is closer to the center of the road and farther from the shoulder. 2. Precautions for overtaking: In regions where driving is on the right, the overtaking lane is the left lane; in regions where driving is on the left, the overtaking lane is the right lane. Overtaking is an inevitable but relatively dangerous behavior in driving. It requires proficient skills and techniques, as well as adherence to traffic regulations to prevent accidents and incidents.
3
0
Share

Does the Lynk & Co vehicle automatically lock when the driver leaves?

Lynk & Co vehicles do not automatically lock when the driver leaves. Here are specific details about Lynk & Co: 1. Introduction: Lynk & Co is a high-end luxury brand under Geely, jointly established by Geely and Volvo. Its models include 01, 02, 03, and 05. 2. Lynk & Co 05: The 05 is a compact crossover SUV, equipped with a 2.0-liter turbocharged engine across all variants. The 2.0-liter turbocharged engine in the Lynk & Co 05 delivers a maximum power of 187 kW and a maximum torque of 350 Nm, with the engine's peak power achieved at 5500 rpm and peak torque available between 1800 to 4800 rpm.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.