What causes the gear failure in Focus?

1 Answers
IslaAnn
07/29/25 6:43pm
Focus gear failure is likely caused by gear lock or not fully braking when parking, directly shifting into P gear, resulting in gear braking instead of brake braking. Solutions: If the entire vehicle cannot power on and the automatic transmission enters self-protection mode, it may also fail to engage gears. Gear unlocking can be performed. If it still doesn't work, you should go to a professional 4S store for inspection by professional maintenance personnel. Smart configurations: The Ford Focus is equipped with the SYNC+ intelligent information entertainment system, which has natural semantic recognition capabilities, supports multi-scenario wake-free operation, and mixed Chinese-English commands. It can use voice to control four major functions: entertainment, intelligent navigation, communication, and vehicle temperature. Additionally, the in-car LCD instrument panel has been upgraded to 8 inches, and the central control screen has been upgraded to 12.3 inches.
Was this review help?
17
3
Share
More Forum Discussions

What Does a 12-Cylinder Engine Mean?

12-cylinder engine refers to an engine that has 12 working strokes to generate power, with each stroke representing one cylinder. Below is relevant information about automotive engines: Definition: An engine is a machine capable of converting fuel energy into mechanical energy, including internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines, steam engines), etc. Number of Cylinders: Common cylinder counts for automotive engines include 3, 4, 5, 6, 8, 10, and 12 cylinders. The most common are 4-cylinder and 6-cylinder engines, with 4-cylinder engines being the most widely used. Relationship Between Cylinder Count and Power: Generally speaking, under the same cylinder volume, more cylinders result in a larger displacement and higher power output. With the same displacement, more cylinders mean smaller cylinder bores, allowing for higher engine speeds and thus greater power output. Of course, the price difference also increases accordingly.
16
1
Share

What does 175/65r14 tire mean?

175/65r14 tire refers to the tire specification parameters, where 175 represents the section width of 175 millimeters, which is the width of the tire tread. 65 represents the aspect ratio of 65%. R indicates that the tire type is a radial tire. 14 represents the rim diameter, meaning this tire is suitable for 14-inch rims. Below is relevant information about car tires: Classification: Tires are categorized by usage, including load-bearing tires, passenger vehicle tires, and mining tires, among others. Load-bearing tires not only have the size specifications marked on the sidewall but must also indicate the ply rating. The ply rating of load-bearing tires does not refer to the actual number of layers but rather to the tire body made with high-strength material cords, whose load performance is equivalent to that of a tire body made with cotton cord layers. Replacement cycle: Tires are rubber products, and even if unused, they will age. It is recommended to replace tires every four years, and even if the mileage driven within the year is low, they should still be replaced once.
19
4
Share

Why does the 2011 Teana one-button start sometimes not respond?

Here are the reasons why the 2011 Teana one-button start sometimes doesn't respond: ECM fuse failure: It is recommended to check the ECM fuse, that is, whether the main power line of the engine control unit is normal. If not, it needs to be replaced. IPDM control unit failure: Check the IPDM control unit, which is the intelligent control unit. If the IPDM control unit wiring harness connector has poor contact, it will affect the normal use of the one-button start function. Battery or key power failure: Check whether the battery voltage is sufficient, and also check whether the key battery is low on power. If there are any of the above problems, the power needs to be replenished or the battery replaced in time.
5
1
Share

What is the method to extinguish a fire after an engine catches fire?

When a car engine catches fire, you should stop the vehicle promptly and use the onboard fire extinguisher to spray into the gaps of the grille, then open the hood to extinguish the fire with the extinguisher. Below are detailed introductions about car engines: 1. Overview: The car engine is the device that provides power to the vehicle, determining its power, fuel efficiency, stability, and environmental friendliness. Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrids, among others. 2. Others: Common gasoline and diesel engines belong to reciprocating piston internal combustion engines, which can convert the chemical energy of fuel into the mechanical energy of piston movement and output power. Gasoline engines have high rotational speeds, are lightweight, produce less noise, are easy to start, and have low manufacturing costs. Diesel engines have a high compression ratio, excellent thermal efficiency, and better economic and emission performance than gasoline engines.
5
2
Share

Is the BMW 5 Series equipped with a 4-cylinder or 6-cylinder engine?

Domestic BMW 5 Series models are all equipped with 4-cylinder engines. For imported BMW 5 Series, there are both 4-cylinder and 6-cylinder engine options. Definition of cylinder count: Cylinder count refers to the number of cylinders in an engine. Common cylinder counts for automotive engines include 3, 4, 6, 8, 10, and 12 cylinders. Engines with displacement below 1 liter typically use 3 cylinders, those between 1-2.5 liters generally use 4 cylinders, around 3 liters usually employ 6 cylinders, approximately 4 liters use 8 cylinders, and above 5.5 liters utilize 12-cylinder engines. Relationship between cylinder count and displacement: Generally speaking, with the same cylinder bore diameter, more cylinders mean greater displacement and higher power output. With the same displacement, more cylinders allow for smaller bore diameters, enabling higher engine speeds and consequently greater power enhancement.
5
0
Share

Is the BMW 330i's acceleration smooth?

BMW 330i's acceleration is smooth, with a 0-100km/h acceleration time of 6.2 seconds. The 2.0L engine it is equipped with has a maximum power of 258 horsepower (190 kilowatts) and a maximum torque of 400 Newton-meters. The transmission uses an 8-speed automatic manual transmission. Acceleration values of other models: Generally, 1.6L compact cars have a 0-100km/h acceleration time between 11 to 13 seconds, 2.0T mid-size cars between 7 to 8 seconds, while supercars mostly have an acceleration time of less than 3.8 seconds. Factors affecting acceleration: Mainly the engine. Among the same displacement, models equipped with turbocharged engines have obvious advantages in the 0-100km/h acceleration project, because their output power is stronger, and the output range of maximum torque is very wide, allowing the vehicle to have maximized acceleration ability at very low speeds.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.