What Causes the Front Wheel Noise When the Trumpchi GS8 Goes Over Speed Bumps?

2 Answers
OCody
07/25/25 5:59am
The main reason for the front wheel noise when the Trumpchi GS8 goes over speed bumps is a fault in the front suspension. However, identifying the specific problematic component requires a thorough inspection. Exterior Design: The GS8 features the world's first matrix LED headlights, paired with the continuous "Lingyun Wing" family-style grille. The body exudes a muscular look, with straight and powerful waistlines, and the "8"-shaped taillights offer high recognition. Performance: The Trumpchi GS8 is equipped with a 2.0T engine, delivering a maximum power of 201 horsepower (148kW) and a peak torque of 320Nm, mated with an Aisin 6-speed automatic transmission.
Was this review help?
18
5
Share
VonLincoln
08/10/25 5:56pm
When driving the Trumpchi GS8, I noticed a strange noise from the front wheels when going over speed bumps. This is quite common and is mostly due to issues with the suspension system, such as aging or loose rubber bushings on the front lower control arms, which cause creaking sounds over bumps. Sometimes, it could also be caused by leaking shock absorbers, leading to insufficient damping. You should first check if the chassis bolts are tightened and whether the wheel bearings are worn out, as these parts are prone to problems over time. I recommend having a trusted mechanic inspect it or taking it directly to a 4S shop. Let the technician use a lift to check the suspension and steering components—replacing small parts usually solves the issue. Don’t delay, as it might worsen the problem. Also, avoid accelerating over speed bumps while driving, as this can damage the suspension more easily. Before parking, test it gently—if the noise disappears or reduces, it’s likely a looseness issue, which could save you some repair costs.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

How to Check a Car's Mileage?

To check a car's mileage, look at the odometer, usually indicated by ODO, with the value followed by the unit KM, which represents the car's total mileage. This helps the driver know the distance traveled. Due to differences in car models and brands, the dashboard display may vary. The car odometer consists of a stepping motor, a six-digit decimal counter, internal transmission gears, etc. Its function is to convert the pulse signal output by the vehicle speed sensor during operation into a specific frequency pulse signal through signal processing circuit frequency division and power amplification.
7
2
Share

Can a vehicle undergo an annual inspection in a different location?

Vehicles can undergo annual inspections in different locations. Based on the registered address information on the motor vehicle driving license, the owner needs to go to the local vehicle management office to apply for an entrustment for an out-of-town annual inspection. If there are any unresolved traffic violations in the place of use, they must be settled in advance. To apply for an entrustment for an out-of-town annual inspection, the following documents are required: the motor vehicle driving license, the original copy of the valid compulsory traffic liability insurance policy, and if the application is entrusted to someone else, the agent's identity proof must also be submitted. The process for an out-of-town annual inspection is as follows: 1. The vehicle owner needs to obtain a notice of entrustment for inspection from the original registration office of the vehicle management; 2. After preparing the required materials, the owner can then proceed to the local vehicle management office to conduct a relevant vehicle information inquiry, after which the normal out-of-town vehicle inspection can be processed.
17
2
Share

How to remove the rear seat backrest of the Besturn B50?

Besturn B50 rear seat backrest removal method: 1. Remove the rear seat and locate the two screws underneath; 2. Then remove the screws, slightly pull the backrest forward after removal, and lift it upward; 3. If it doesn't lift easily, use a flashlight to check inside the trunk for any obstructions—there might be a small hook-like clip holding the backrest in place. Release it and pull the backrest upward with force to successfully remove it. The Besturn B50 is a car independently developed by FAW Car, with body dimensions of 4615mm in length, 1785mm in width, and 1435mm in height. In terms of suspension, the Besturn B50 features a double-wishbone independent front suspension with a stabilizer bar.
4
4
Share

Where is the Kuga's air filter located?

The Kuga's air filter is located in the front passenger footwell. There are screw holes where the left foot would rest. Open a small cover on the central console to find it inside. The Kuga is a compact SUV introduced by Ford, with body dimensions of 4524mm in length, 1838mm in width, and 1701mm in height, and a wheelbase of 2690mm. In terms of exterior design, the Kuga features the brand's signature hexagonal grille, making it resemble a smaller version of the Edge. Under the hood, the Kuga is equipped with either a 1.6T EcoBoost or a 2.0T EcoBoost turbocharged engine.
20
0
Share

What is the ground clearance of the Kia K4?

The ground clearance of the Kia K4 is 131mm. The chassis serves to support and install the engine and its various components and assemblies, forming the overall structure, receiving the engine's power to enable vehicle movement and ensure normal driving. The chassis consists of four parts: the transmission system, the running gear, the steering system, and the braking system. The Kia K4 is a mid-size sedan with body dimensions of 4720mm in length, 1815mm in width, and 1465mm in height. In terms of exterior design, the Kia K4 features a large-sized grille decorated with crisscrossed chrome bars in a window-style pattern, integrated with the bumper to create a bold front fascia.
3
1
Share

Where is the engine number of Audi A6 located?

The engine number of the A6 is located on the lower left side of the engine, near the flywheel position. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. It is used to represent information such as the manufacturer, specifications, performance, features, manufacturing process, intended use, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. It is used to represent information such as the manufacturer, specifications, performance, features, manufacturing process, intended use, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power. Engines installed in passenger cars or multi-purpose vehicles must be marked with the professional manufacturer, model, and production number as required by regulations. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's product line, and multiple engines can share the same model. The engine number, however, refers to the production number of the engine, which is unique to each individual engine. Composition of the engine number: Front section: Includes the product series code, generation symbol, and regional or corporate code. Manufacturers can choose the appropriate letters as needed, but these must be approved and recorded by the industry standardization authority. Middle section: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear section: Composed of symbols representing structural and usage features. Tail section: Distinguishing symbol. If differentiation is needed due to improvements or other reasons within the same product series, the manufacturer can choose an appropriate symbol. The rear and tail sections can be separated by a hyphen (-).
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.