What Causes the Foul Smell in the Phideon's Air Conditioning?

1 Answers
Annie
07/25/25 3:28am
The foul smell emitted by the Phideon's air conditioning is caused by a dirty air filter. The air filter is designed to trap impurities from the air. If it is not cleaned for a long time, bacteria and fungi can grow, leading to unpleasant odors that are blown into the car through the vents. If the air filter needs to be replaced, here are the steps to replace it: 1. Use a tool to loosen the locking nut on the air filter box. 2. Lift the cover of the air filter box to reveal the old air filter. 3. Remove the filter and check its condition—whether it is too dirty or structurally damaged—to determine if replacement is necessary. 4. If replacement is not needed, clean the filter with an air gun and continue using it. If the filter is damaged or too dirty, install a new one, referring to the position of the old filter during installation.
Was this review help?
13
1
Share
More Forum Discussions

What engine does the Zhonghua Junjie FSV use?

Zhonghua Junjie FSV uses two engines in total, one is a 1.5-liter naturally aspirated engine, and the other is a 1.6-liter naturally aspirated engine. The 1.5-liter naturally aspirated engine has a maximum power of 75 kW and a maximum torque of 135 Nm. This engine can output maximum power at 5600 to 6000 rpm and maximum torque at 4000 to 4600 rpm. The 1.6-liter naturally aspirated engine has a maximum power of 74.2 kW and a maximum torque of 134 Nm. This engine can output maximum power at 6000 rpm and maximum torque at 4500 rpm. It uses an aluminum alloy cylinder head and cast iron cylinder block, matched with a 4AT transmission.
16
5
Share

Where is the sunroof drain hole located on the Baojun 730?

The sunroof drain holes on the Baojun 730 are located in the four corners of the sunroof. They are easily visible when the sunroof is opened. Below is an introduction to the function of the sunroof drain holes and maintenance precautions. Function of the sunroof drain holes: The sunroof drain holes are designed to prevent rainwater from entering the cabin. This structure is present in all models equipped with a sunroof, but it requires regular maintenance. The sealing strips around the drain holes should also be replaced once a year. Maintenance precautions for the sunroof drain holes: Inspect the sunroof tracks at least once a year. Fully open the sunroof and check for any dirt or debris in or around the tracks. After cleaning, lubricate the sunroof tracks with grease to prevent rust and ensure smooth operation of the sunroof.
14
2
Share

What is the reason for the Baojun 510 electronic steering lock failure causing the car not to start?

Generally, the reason is a lack of battery power, which causes the steering wheel to lock. If the battery is not the issue, you can only go to a repair facility to diagnose the fault through computer testing. Below is some relevant information about the Baojun 510: Powertrain: The Baojun 510 is equipped with a 1.5L high-torque naturally aspirated engine, and the transmission system offers three options: 6MT/5AMT/simulated 8-speed CVT. Body appearance: The new Baojun 510 measures 4220/1740/1605mm in length, width, and height, with a wheelbase of 2550mm. In terms of appearance, it features a new front and rear design, a new high-gloss matrix grille, paired with LED split-type headlights, and the rear section has conventional halogen taillights.
8
3
Share

What is the maximum wading depth of the Audi Q7?

The maximum wading depth of the Audi Q7 is 30cm. Here are the specific details: Principle: The exhaust pipe of the Audi Q7 is 28cm from the ground, and the half-height of the wheels is 30cm. This means that when the water reaches half the height of the wheels, it can basically enter the exhaust pipe, but this is not a major issue and will not damage the catalytic converter. The half-height of the wheels is widely recognized as a relatively safe wading depth. Additional Information: The air intake of the Audi Q7 is located on the support crossbeam under the engine hood, with the opening facing forward and horizontally. The pipe connecting the air intake to the air filter has a certain curvature. If water briefly enters the air intake, it will not immediately flow into the air filter. As long as there is no moisture adhering to the air filter, the engine will not stall.
12
3
Share

How to Use Lexus Dash Cam?

Ning Yi
12
2
Share

What is the Difference Between 4WD Off-Road Forklifts and Regular Forklifts?

The difference between 4WD off-road forklifts and regular forklifts lies in the fact that off-road forklifts have stronger performance, greater horsepower, and are designed to tackle challenges such as climbing hills and traversing muddy terrain. In contrast, regular forklifts are typically two-wheel drive and are suitable for flat and solid surfaces. Below is an introduction to off-road and regular forklifts: 1. Off-road forklifts feature high-power engines, all-wheel drive, and off-road tires, enabling them to operate on hills, mountains, beaches, sand, snow, ice, and muddy roads, offering excellent off-road capabilities. 2. Regular forklifts are, strictly speaking, industrial forklifts. They are characterized by compact structures, small turning radii, and low ground clearance, making them ideal for flat and solid surfaces. For general factory and enterprise use, they are an excellent choice.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.