···
Log in / Register

What causes the Ford Focus cigarette lighter to lose power?

4 Answers
KeeganMarie
07/29/25 3:47pm

Reasons for the Ford Focus cigarette lighter losing power: It may be due to poor contact or a blown fuse. The cigarette lighter is a component found in all cars, designed to provide a flame source for smokers. The commonly referred cigarette lighter can be divided into those that draw power from the power source. Some manufacturers produce cigarette lighters not for lighting cigarettes but for drawing power from the car, also known as cigar lighters. The Ford Focus is a Class A family car with dimensions of 4647mm in length, 1810mm in width, and 1468mm in height. In terms of power, this car is equipped with 1.0T and 1.5T engines.

Was this review help?
17
1
Share
AustinLee
08/15/25 3:27am

Recently, the cigarette lighter in my Focus suddenly stopped working, which really puzzled me. When this happens, the most common issue is a blown fuse—there's a dedicated fuse for the cigarette lighter circuit. If you start the car and plug in a charger but get no response, chances are the fuse has melted. The fuse box is usually located under the steering wheel or in the engine compartment; just open the cover and refer to the manual to locate the corresponding fuse. Be careful during inspection—if the fuse is blown, replace it with a new one (they cost around 5 to 10 yuan and are easy to fix). Other possible causes include poor wiring contact or aging spring contacts inside the socket. Repeated plugging of devices can deform the spring contacts, leading to power failure. If replacing the fuse doesn’t solve the problem, it might be due to a short circuit or a faulty relay, especially in older cars where wiring tends to degrade. For safety, avoid poking around randomly—ask a friend for help or visit a repair shop for diagnosis. Regular cleaning of the cigarette lighter socket can help prevent this issue.

Was this review help?
12
1
Share
Expand All
RuthDella
10/12/25 3:52am

I find it quite annoying when the cigarette lighter doesn't work, especially when you can't charge your phone while driving. There are usually several reasons for this: First, it could be a fuse issue. The cigarette lighter circuit has overcurrent protection, and using high-power devices like car vacuum cleaners frequently can easily blow the fuse. Second, check the cigarette lighter plug; if the spring contacts are faulty, it won't conduct electricity—cleaning the contacts might help. If you've checked these and it still doesn't work, it might be a broken wire or a relay failure. Like the last time I had a similar issue, it turned out to be oxidized relay contacts. Start with the simple fixes first: check the fuse and plug; replacing a blown fuse can restore functionality. Leaving it unrepaired for a long time can affect vehicle safety, such as risking a short circuit that could cause a fire. So, address the problem as soon as you notice it; don't delay. If you're not sure what to do, take it to a professional shop for a circuit check—it usually takes just 20 minutes. Develop good habits: avoid plugging in low-quality electrical devices and regularly inspect your vehicle's electrical system.

Was this review help?
10
3
Share
Expand All
LaHope
11/25/25 4:54am

My car's cigarette lighter has also had a power failure issue before. It might be a blown fuse, check the location in the fuse box. Poor contact of the internal spring plates in the socket is also possible. Wiring issues like short circuits or aging are common as well. Try replacing the fuse; if that doesn't work, visit a repair shop. A non-functioning cigarette lighter should be fixed promptly to avoid affecting charging or causing worse problems.

Was this review help?
20
1
Share
Expand All
More Forum Discussions

What Causes Car Shaking During Start-Up?

Reasons for car body shaking after start-up: unstable oil pressure, aging engine components, and severe engine carbon buildup. If the car shakes during start-up, it is recommended to promptly visit a 4S shop for inspection and repair to avoid greater safety hazards. Below are the detailed explanations: Unstable Oil Pressure: Abnormal fuel pump supply pressure or incorrect and poor performance of the intake pressure sensor can cause body shaking. Solution: Check the oil pressure and replace components if necessary. Aging Engine Components: Car shaking is also related to aging engine mounts. Engine mounts are essentially the shock absorption system of the engine, responsible for absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations will transfer to the steering wheel and the cabin, causing shaking during idle. Solution: Replace engine components. Severe Engine Carbon Buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. Solution: Clean the fuel system and check if the idle control valve has carbon buildup that needs cleaning.
18
0
Share

What does 'Please change the engine oil immediately' mean?

"Please change the engine oil immediately" is a reminder to the vehicle owner that the engine oil is running low and needs to be replaced. The method for changing the engine oil is as follows: 1. Lift the vehicle, remove the protective plate, and place a container under the oil drain screw; 2. Unscrew the oil drain screw, use an air gun to blow for two minutes at the oil filler port, then tighten the oil drain screw after draining and wipe it with a tissue to check for leaks; 3. Reinstall the protective plate and lower the vehicle, then add new oil through the oil filler port. Precautions for changing engine oil: 1. Perform the operation while the engine is warm to ensure the old oil is drained as completely as possible; 2. Add the new oil and ensure the amount is appropriate; 3. After adding the oil, start the engine and check all components for leaks. Run the engine for 3 minutes to confirm the oil level is at the normal mark.
10
5
Share

Where does the car air conditioner drip water?

The car air conditioner drips water at a position slightly to the right of the middle of the chassis below the center console, connected by a hose from below the evaporator to the chassis. The functions of the air conditioner are: 1. To cool, heat, ventilate, and purify the air inside the car; 2. To provide a comfortable environment for passengers, reduce driver fatigue, and improve driving safety. Maintenance methods for the air conditioner: 1. Clean the air conditioner vents promptly; 2. Maintain the air conditioner condenser promptly; 3. Clean or replace the air filter promptly. Proper usage methods for the air conditioner: 1. Turn off the air conditioner when driving at low speeds; 2. Do not smoke when the air conditioner is on inside the car; 3. Turn off the engine before turning off the air conditioner; 4. Immediately activate the internal circulation when entering the car in summer.
9
2
Share

How to Turn on the Buick Heater Air Conditioning?

The method to turn on the Buick heater air conditioning is: 1. Start the engine; 2. Press the air conditioning control button; 3. Turn off the air conditioning cooling switch; 4. Click the plus button for temperature adjustment to set the air conditioning temperature. Buick models include: Buick GL8, Buick Excelle, Buick Regal, Buick LaCrosse, Buick Envision, etc. Taking the 2021 Buick GL8 as an example, it is an MPV with body dimensions of: length 5238mm, width 1878mm, height 1776mm, and a wheelbase of 3088mm. The 2021 Buick GL8 is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 237PS, a maximum torque of 350Nm, a maximum power of 174kW, and is paired with a 9-speed automatic transmission.
1
5
Share

How to reset the tire pressure warning light on an Audi A4L?

The method to reset the tire pressure warning light on an Audi A4L is: 1. Press the 'car' button located on the center of the dashboard; 2. Rotate the central round button to find options such as maintenance reset, oil level, and tire pressure reset, then select and confirm. Taking the 2020 Audi A4L as an example, it belongs to the mid-size car category with body dimensions of length 4858mm, width 1847mm, height 1439mm, and a wheelbase of 2908mm. The 2020 Audi A4L features a five-link independent suspension at the front and rear, and is equipped with a 2.0L turbocharged engine delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 270Nm, paired with a 7-speed dual-clutch transmission.
16
3
Share

Where is the production date on the seat belt?

The production date on the seat belt is located on the label at the bottom end of the belt. The function of the seat belt is: when the vehicle collides or emergency braking is applied, the pre-tensioning device will instantly retract, tightening the slack belt, firmly securing the occupant to the seat to prevent secondary collisions. The method for replacing the seat belt is: 1. Locate the wiring under the car seat and find the sensor wire for the seat belt buckle; 2. Remove the seat cushion, take off the airbag, find the bolt securing the seat belt, and remove the seat belt buckle; 3. Find the seat cushion sensor inside the seat cushion and remove it; 4. Install the new seat belt buckle onto the seat and insert the bolt; 5. Install the weight sensor on the car seat, then install the new retractor and tighten it with a wrench; 6. Restore the car seat cushion to its original position and arrange the wiring at the bottom of the seat properly.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.