What Causes the Fifth Gear Noise in a Manual Transmission?

1 Answers
LukeMarie
07/28/25 8:32pm
Manual transmission fifth gear noise may be caused by worn or damaged bearings, low precision, poor lubrication, or loose bolts. Worn or damaged bearings: When bearings wear out, their clearance increases, leading to reduced fitting precision. If bearings are damaged, they cannot operate normally, resulting in abnormal noises and even damage to transmission components, which may escalate the issue. Low precision: This can be caused by worn transmission components or the use of replacement parts with insufficient precision, such as excessive clearance between worn gears or newly replaced gears and the original gears. Poor lubrication: Insufficient or overly viscous lubricant can lead to poor lubrication. In such cases, the corresponding lubricant should be replaced; otherwise, it will accelerate transmission wear and shorten its service life. Loose bolts: Bolts on the transmission housing (end cover) may become loose. Vibration during operation can loosen the bolts, so regular inspections are recommended.
Was this review help?
1
4
Share
More Forum Discussions

How many colors does the Tiguan come in?

Tiguan offers a total of five colors, which are Aurora White, Black Lava, Savannah Beige, Sand Gold, and Rocky Brown. 1. The Tiguan is equipped with two types of engines: a 1.4-liter turbocharged engine and a 1.8-liter turbocharged engine. 2. The power delivery of a turbocharged engine differs from that of a naturally aspirated engine, as it can deliver maximum torque at lower RPMs, making it more suitable for stop-and-go city driving. 3. The Tiguan measures 4506 mm in length, 1809 mm in width, and 1685 mm in height, with a wheelbase of 2684 mm.
8
3
Share

What causes the set indicator light to illuminate?

set light is the tire pressure monitoring light. The illumination of the set indicator light may be caused by abnormal tire pressure. When the set indicator light is on, it is necessary to check whether the tire pressure is normal. Generally, when the set light is on, the tire pressure monitoring warning light on the dashboard will also illuminate. Additional information: 1. Most cars equipped with tire pressure monitoring systems will only issue an alarm when the tire pressure is abnormal, but they usually cannot display real-time tire pressure data. 2. Some high-end cars can display real-time tire pressure data. These vehicles are generally equipped with tire pressure monitoring sensors in all four wheel rims. 3. Tires are the only components of a car that come into contact with the ground, making them crucial for driving safety and stability.
17
1
Share

Does Lynk & Co have a four-cylinder engine?

Lynk & Co has four-cylinder engines. The Lynk & Co 01, Lynk & Co 02, and Lynk & Co 03 all feature four-cylinder engines. Below is an introduction to each Lynk & Co model: 1. The Lynk & Co 01 is equipped with a 2.0-liter inline 4-cylinder turbocharged engine, paired with either a 6-speed automatic or 7-speed dual-clutch transmission, delivering a maximum power of 140KW and a maximum torque of 300N·m. 2. The Lynk & Co 02 also features a 2.0-liter inline 4-cylinder turbocharged engine, matched with either a 6-speed automatic or 7-speed dual-clutch transmission, producing a maximum power of 140KW and a maximum torque of 300N·m. 3. The Lynk & Co 03 comes with a 2.0-liter inline 4-cylinder turbocharged engine, available in high-power and low-power versions. The low-power version is paired with a 6-speed automatic transmission, delivering a maximum power of 140KW and a maximum torque of 300N·m, while the high-power version is matched with an 8-speed automatic transmission, offering a maximum power of 187KW and a maximum torque of 350N·m.
13
2
Share

Can B2 Points Deduction Be Handled on Traffic Management 12123?

B2 driver's license points deduction can be processed for annual review on Traffic Management 12123. For B2 driver's license, only 1-8 points deduction can be handled for annual review and study on Traffic Management 12123; deductions of 9-12 points require on-site annual review and study. Below is relevant information about Traffic Management 12123: 1. Introduction: Traffic Management 12123 is the official client of the Internet-based comprehensive traffic safety service management platform, supported by the Traffic Management Research Institute of the Ministry of Public Security. It provides comprehensive traffic safety services for vehicle owners and drivers, including: personal user registration on the Internet service platform, appointment, acceptance, and handling of services such as vehicle/driver's license/illegal activity processing, traffic safety information inquiries, service notifications and reminders, service guidance, and road traffic services. 2. Usage: Users can independently handle non-on-site traffic violation records with a single fine amount of 200 yuan or less and cumulative points less than 12 for themselves and up to 3 bound non-personal vehicles; independently pay for traffic violations issued by officers on-site; independently handle traffic violation records for their own vehicles and up to 3 bound non-personal vehicles; and process non-on-site traffic violation records nationwide for their own vehicles and bound non-personal vehicles.
20
2
Share

What is an Engine Control Module (ECM) failure?

Engine Control Module (ECM) failure is a software malfunction in the vehicle's computer. Concept: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy. Classification: Internal combustion engines, external combustion engines (where fuel burns outside the engine), gas turbines, and jet engines. In addition, many new energy engine types have been introduced recently.
3
2
Share

What does 'Leopaard CS10 maintenance light reset' mean?

Leopaard CS10 maintenance light reset refers to the process of resetting the maintenance reminder light. 1. Its function is to record the mileage of important components, serving as a reminder for both car owners and maintenance personnel. 2. If relevant components are replaced without resetting the light, it won't affect vehicle performance but may cause inconvenience for future part replacements by obscuring accurate usage duration tracking. 3. Exterior-wise, the new Leopaard CS10 features a radiant diamond grille connected to the headlights, creating a 'drawn bow' visual effect. The side profile showcases fluid lines with sharp character lines conveying muscularity, along with upgraded mirrors for reduced wind resistance. Notably, the rear sports cloud-pattern LED smoked taillights paired with 18-inch twin-spoke turbine wheels for enhanced recognition. 4. The interior adopts a beige/black two-tone scheme for a homely ambiance, featuring a striking wraparound dashboard integrating the infotainment screen and instrument cluster. Standard equipment includes emergency brake assist, parking sensors, and rearview camera. 5. Powertrain options comprise 1.5T (110kW/150PS, 200N•m) and 2.0T (130kW/177PS, 250N•m) engines, mated to 5MT/CVT and 6DCT transmissions respectively.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.