What Causes the False High Water Temperature When the Air Conditioning is Turned On in Jinbei Haise?

2 Answers
LaAthena
09/07/25 3:45am
When the car's air conditioning is turned on and the water temperature rises, it should be an issue of poor heat dissipation. Below is relevant information about Jinbei Haise: 1. Product Introduction: The Haise brand light passenger vehicle incorporates manufacturing technology introduced from Toyota Motor Corporation of Japan, producing the RZH115L Haise series of light passenger vehicles. Based on this, the SY6480 Haise series of light passenger vehicles and over a hundred types of special-purpose vehicles have been developed. It offers comfortable seating, superior overall vehicle quality, exquisite exterior styling, and excellent power performance and reliability, maintaining a leading position in the domestic market for similar products for many consecutive years. 2. Market Positioning: As a well-known brand in the domestic light passenger vehicle market, the Jinbei Haise series has held the top position in terms of domestic market share for twelve consecutive years. Over the years, Jinbei Haise has introduced multiple models, achieving not only good market response but also establishing a strong reputation among consumers. Today, Jinbei Haise stands like an "evergreen tree" in the light passenger vehicle market, enduring and renewing over time.
Was this review help?
9
4
Share
DiGriffin
09/19/25 3:11am
I encountered this issue when driving the Jinbei Haise. The water temperature gauge would spike when the AC was turned on, but the actual engine inspection showed it wasn't overheating. A common trigger is the AC increasing the engine load while the cooling system fails to keep up. The main culprit is usually the fan not engaging - it should automatically activate to dissipate heat when the AC is running. If the fan motor is aging or the relay has poor contact, it can easily cause false high-temperature readings. Another frequent issue is the thermostat getting stuck in the closed position, disrupting coolant circulation and causing false high-temperature gauge readings. I once fixed it by spending a small amount to replace the fan motor. It's good practice to regularly check coolant levels and fan operation to avoid roadside troubles. Additionally, loose or contaminated sensor wiring can also cause false alarms - simple cleaning or reconnecting might solve some of these minor headaches.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What Are the Reasons for Slow Cooling in Car Air Conditioning?

Reasons for slow cooling in car air conditioning may include insufficient refrigerant, moisture infiltration into the air conditioning system, or reduced heat dissipation capability of the condenser. Additionally, aging compressors and belts, clogged refrigerant pipelines, long-term neglect in replacing the air conditioning system's filters, or malfunctioning cooling fans can also lead to slow cooling in car air conditioning. Specific reasons for slow cooling in car air conditioning: 1. Insufficient refrigerant due to low levels: The primary cause of insufficient refrigerant is usually leakage in the system. If the air conditioning system lacks sufficient refrigerant, the amount of refrigerant sprayed into the evaporator from the expansion valve will decrease, leading to reduced heat absorption during evaporation in the evaporator and consequently lower cooling capacity. 2. Moisture infiltration into the air conditioning system: The system includes a dryer (or receiver-drier), whose main function is to absorb moisture from the refrigerant to prevent excessive moisture from reducing cooling efficiency. However, when the desiccant in the dryer becomes saturated, it can no longer filter out moisture. As the refrigerant passes through the expansion valve's throttle orifice, the drop in pressure and temperature can cause the moisture in the refrigerant to freeze, obstructing the refrigerant flow, increasing resistance, or even completely blocking it. 3. Reduced heat dissipation capability of the condenser: Due to varying operating environments, the condenser located at the front of the car engine may accumulate oil, dirt, or debris, reducing its heat dissipation efficiency. Additionally, issues with the cooling fan, such as a loose drive belt, reduced fan speed, or high-speed operation, can also impair the condenser's heat dissipation. Solutions include cleaning the condenser surface with a soft brush and promptly addressing any fan malfunctions. 3. Reduced heat dissipation capability of the condenser: Due to varying operating environments, the condenser located at the front of the car engine may accumulate oil, dirt, or debris, reducing its heat dissipation efficiency. Additionally, issues with the cooling fan, such as a loose drive belt, reduced fan speed, or high-speed operation, can also impair the condenser's heat dissipation. Solutions include cleaning the condenser surface with a soft brush and promptly addressing any fan malfunctions.
1
4
Share

How to Repair a Diesel Engine Radiator Leak?

If the freshwater pump monitoring hole also shows signs of leakage, the freshwater pump should be removed from the engine body, disassembled, and then the water seal should be replaced. After identifying the leaking area of the radiator, clean the affected area thoroughly and use a metal brush or scraper to completely remove any metal paint and rust.
6
4
Share

What is the solution if the Ford Focus trunk cannot be opened?

On the door trim panel, you can see a trunk release button. It can be used to open the trunk, provided that the vehicle is in the unlocked state. Locate the trunk lock area, then take out a flathead screwdriver.
20
3
Share

How to Deal with Soaked Car Carpets?

When the car interior gets flooded and the carpets become soaked, if the situation is not too severe, first remove the wet carpets and then clean up the remaining water inside the car. There are several rubber seals at the bottom of the vehicle chassis. Opening these seals can help drain the accumulated water from the cabin. After the water is cleared, simply open the car windows on a sunny day to allow thorough drying.
4
0
Share

How to Handle Running a Red Light Violation and Paying the Fine?

Prepare the relevant documents and confirm the ownership of the violating vehicle. The staff will print out the penalty decision form. Take the penalty decision form to the designated bank to pay the fine. Use a CCB savings card, then log in to the CCB website, click on General Payment, and select Traffic Fine. Enter the penalty decision form number. After confirmation, the fine payment will be completed.
14
2
Share

How to Park and Turn Off a Push-to-Start Car?

Press and hold the brake pedal to bring the car to a smooth stop. Shift the gear from D (Drive) to N (Neutral) and engage the handbrake. Continue holding the brake pedal, then shift the gear from N (Neutral) to P (Park). Release the brake pedal and press the push-to-start button to turn off the power and complete the shutdown process.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.